Search Legislation

Commission Delegated Regulation (EU) 2017/1182Show full title

Commission Delegated Regulation (EU) 2017/1182 of 20 April 2017 supplementing Regulation (EU) No 1308/2013 of the European Parliament and of the Council as regards the Union scales for the classification of beef, pig and sheep carcasses and as regards the reporting of market prices of certain categories of carcasses and live animals

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about opening options

Opening OptionsExpand opening options

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Changes to legislation:

There are outstanding changes not yet made to Commission Delegated Regulation (EU) 2017/1182. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

CHAPTER IU.K. UNION SCALES FOR THE CLASSIFICATION OF CARCASSES

Article 1U.K.Identification of age and categories of bovine animals

The age of the bovine animals for the determination of the categories as referred to in point A.II of Annex IV to Regulation (EU) No 1308/2013 shall be verified on the basis of the information available in the bovine animal identification and registration system established in each Member State in accordance with Title I of Regulation (EC) No 1760/2000.

Article 2U.K.Derogations from the compulsory classification of carcasses

1.Member States may decide that the requirements on classification of carcasses of bovine animals and of pigs, laid down in points A.V and B.II of Annex IV to Regulation (EU) No 1308/2013, respectively, shall not be compulsory for slaughterhouses which slaughter:

(a)less than 150 bovine animals aged eight months or more per week as an annual average;

(b)less than 500 pigs per week as an annual average.

Member States may determine a lower limit, in particular to ensure the representativeness of price recording as referred to in Article 8(2) of Implementing Regulation (EU) 2017/1184.

2.Member States may decide that the requirements on classification of carcasses of bovine animals and pigs shall not be compulsory:

(a)for carcasses of bovines and pigs owned by the slaughterhouse if no commercial transaction in purchasing these animals takes place;

(b)for carcasses of pigs of clearly defined local breeds or with particular modes of marketing if their anatomical body composition makes the homogeneous and standardised classification of carcasses impossible.

3.Member States that apply classification of sheep carcasses pursuant to the second paragraph of Article 10 of Regulation (EU) No 1308/2013 may decide, based on objective and non-discriminatory criteria, that the requirements on classification of sheep carcasses shall not be compulsory for certain slaughterhouses.

4.Member States shall notify the Commission if they decide to apply any of the derogations laid down in paragraphs 1, 2 and 3 of this Article.

Article 3U.K.Additional provisions regarding the classes of conformation, fat cover and carcass weight for bovine animals and sheep

1.Additional provisions regarding the definitions of the classes of conformation and fat cover for carcasses of bovine animals aged eight months or more and sheep referred to in points A.III and C.III of Annex IV to Regulation (EU) No 1308/2013 are laid down in Annexes I and II to this Regulation.

2.Additional provisions regarding the classification of lambs of less than 13 kg carcass weight are laid down in Annex III to this Regulation.

Article 4U.K.Conformation class S

Member States may decide not to apply the conformation class S for beef carcasses referred to in point A.III of Annex IV to Regulation (EU) No 1308/2013 taking into account the particular characteristics of their bovine livestock.

Article 5U.K.Classification of pig carcasses

Member States may further subdivide into subclasses the pig carcass classification classes laid down in point B.II of Annex IV to Regulation (EU) No 1308/2013.

Member States may authorise further assessment criteria, in addition to weight and estimated lean meat percentage referred to in point B.II of Annex IV to Regulation (EU) No 1308/2013, to determine the commercial value of the pig carcasses.

Article 6U.K.Additional requirements on carcass presentation for the purpose of establishing comparable market prices

1.Without prejudice to points A.IV, B.III and C.IV of Annex IV to Regulation (EU) No 1308/2013, no fat, muscle or other tissue may be removed from the carcass before weighing, classifying and marking, except for cases when veterinary requirements are applied.

2.Carcasses of bovine animals aged less than eight months shall be presented in accordance with point A.IV of Annex IV to Regulation (EU) No 1308/2013 and without:

(a)thin skirt;

(b)thick skirt.

3.Carcasses of bovine animals aged eight months or more shall be presented without:

(a)kidneys;

(b)kidney fat;

(c)pelvic fat;

(d)thin skirt;

(e)thick skirt;

(f)the tail;

(g)the spinal cord;

(h)cod fat;

(i)fat on the inside of topside;

(j)jugular vein and the adjacent fat.

4.For the application of the second paragraph of point A.V of Annex IV to Regulation (EU) No 1308/2013 and by way of derogation from paragraph 1 of this Article, Member States may allow the removal of external fat before weighing, classifying and marking of the carcass provided that such removal allows a more objective judgement of the conformation and the fat cover is not influenced. Member States shall ensure that this practice is regulated by national legislation and shall involve exclusively the partial removal of external fat:

(a)from the haunch, the sirloin and the middle ribs;

(b)from the point end of brisket and the outer ano-genital area;

(c)from the topside.

Article 7U.K.Classification and weighing

1.The classification referred to in points A.II, A.III, B.II, C.II and C.III of Annex IV to Regulation (EU) No 1308/2013 shall be carried out in the slaughterhouse at the time of determining the warm weight of the carcass.

2.The Commission may authorise classification before weighing in accordance with Article 11 of this Regulation if certain grading methods applied in the territory of a Member State require this.

3.The carcasses shall be weighed as soon as possible after slaughter and not later than:

(a)60 minutes after the animal has been stuck, as regards bovine animals and sheep;

(b)45 minutes after the animal has been stuck, as regards pigs.

4.In the case of pigs, if in a given slaughterhouse, the 45-minute time period between the sticking and the weighing of the carcasses cannot generally be observed, the competent authority of the Member State concerned may allow that the deduction of 2 % as referred to in Article 14(3):

(a)shall be reduced by 0,1 per cent units for every additional quarter of an hour or part thereof that has elapsed when the period between sticking and weighing exceeds the 45 minutes;

(b)can be increased by certain per cent units established by the Member State concerned when the period between sticking and weighing is shorter than 45 minutes. In this case the deduction shall be justified on the basis of scientific data.

5.In cases where beef or sheep automated grading methods referred to in Article 10 fail to classify carcasses, classification of these carcasses shall take place on the day of slaughter or, if the required period between sticking and weighing has expired on the day after the slaughter, classification shall take place as soon as possible on that day.

Article 8U.K.Marking of carcasses

1.The marking of carcasses shall be carried out at the time of classification.

2.The marking shall be performed by means of a stamp or a label indicating at least:

(a)for beef and sheep, the category, the class of conformation and fat cover referred to in points A.II, A.III, C.II and C.III of Annex IV to Regulation (EU) No 1308/2013 respectively;

(b)for pigs, the class of the carcass or the percentage of estimated lean meat as laid down in point B.II of Annex IV to Regulation (EU) No 1308/2013.

3.The marking shall be located on the surface of at least:

(a)each quarter of beef carcass;

(b)each carcass or half carcass of sheep;

(c)each half carcass of pigs.

Stamp markings shall be located on the outside surface of the carcass. Labels may be located on the outside or inside surface of the carcass.

4.Stamp markings shall be clearly legible and performed by using an indelible, non-toxic and heat resistant ink.

5.Labels shall be clearly legible, tamper-proof and firmly attached to the carcasses.

6.Member States may lay down that carcasses may not be marked in the following cases:

(a)an official record is drawn up and comprises for each carcass at least:

(i)

individual identification of the carcass by any unalterable means,

(ii)

warm weight of the carcass, and

(iii)

result of the classification;

(b)all the carcasses are cut, as a continuous operation, in a cutting plant approved in accordance with Regulation (EC) No 853/2004 of the European Parliament and of the Council(1) and attached to the slaughterhouse.

7.Member States may lay down national provisions on additional requirements on marking.

Article 9U.K.Methods for classification of beef, pig and sheep carcasses

Member States shall ensure that beef, pig and sheep carcass classification is carried out:

(a)

by qualified classifiers who have obtained a licence for visual classification of carcasses. The licence may be replaced by an approval granted by the Member State where such approval corresponds to recognition of a qualification; or

(b)

by using authorised grading methods that may consist of automated or semi-automated or manual grading techniques as provided for in Articles 10 and 11. Member States shall ensure that the grading techniques are operated by qualified personnel

Article 10U.K.Authorisation of automated grading methods for beef and sheep carcasses

1.Member States may grant a licence authorising beef and sheep automated grading methods that consist of an automated grading technique (apparatus) and an equation (formula) for application in their territory or a part thereof.

2.Authorisation shall be subject to meeting the conditions and minimum requirements for an authorisation test laid down in Part A of Annex IV.

3.At least two months prior to the start of the authorisation test, Member States shall provide the Commission with the information referred to in Part B of Annex IV in order to allow the Commission to participate in the authorisation test.

4.Member States shall designate an independent body which shall analyse the results of the authorisation test. Within two months upon completion of the authorisation test, Member States shall provide the Commission with the information referred to in Part C of Annex IV.

5.Where a licence is granted authorising beef or sheep automated grading methods based on an authorisation test during which more than one carcass presentation was used, the differences between those carcass presentations shall not lead to differences in the classification results.

6.Member States may authorise beef and sheep automated grading methods without organising an authorisation test, provided that such authorisation has already been granted for the same grading methods for application in another Member State on the basis of an authorisation test where the sample of carcasses is sufficiently representative for the bovine or sheep population in the Member States concerned.

7.Modifications of the technical specifications of an authorised beef or sheep automated grading method shall be approved by the competent authorities subject to proof that such modifications result in a level of accuracy that at least fulfils the minimum requirements for an authorisation test.

Member States shall inform the Commission of any such modifications for which they have given their approval.

Article 11U.K.Authorisation of grading methods for pig carcasses

1.A grading method as referred to in point B.IV of Annex IV to Regulation (EU) No 1308/2013 shall consist of an automated, semi-automated or manual grading technique (apparatus) and an equation (formula) to estimate the lean meat percentage of a pig carcass.

2.Authorisation shall be subject to meeting the conditions and minimum requirements for an authorisation test in accordance with Part A of Annex V to this Regulation.

3.Member States shall inform the Commission, by way of a protocol as specified in Part B of Annex V to this Regulation, on the pig grading methods they wish to have authorised for application in their territories.

The protocol shall have two parts and shall include the elements provided for in Part B of Annex V to this Regulation.

Part one of the protocol shall be submitted to the Commission prior to the start of the authorisation test. Within two months upon completion of the authorisation test, Member States shall provide the Commission with part two of the protocol.

4.After receiving the protocol, the Commission shall make it available to the other Member States. Other Member States may submit technical comments within three weeks from the receipt of the protocol. The Member State that submitted the protocol may adapt it and re-submit a new protocol within eight weeks after submission of the first protocol.

5.The application of grading methods shall correspond in all particulars to the description given in the Commission decision authorising them.

6.The Commission may authorise grading methods without an authorisation test, provided that such authorisation has already been granted for the same grading method applicable in another Member State on the basis of an authorisation test where the sample of carcasses is sufficiently representative of pig populations in the Member States concerned.

Article 12U.K.Additional provisions on classification by automated grading techniques

1.Slaughterhouses operating classification by using automated grading techniques as laid down in Articles 10(1) and 11(1) shall:

(a)as regards beef carcasses, identify the category of the carcass by using the system for the identification and registration of bovine animals established pursuant to Article 1;

(b)keep daily control reports on the functioning of the automated grading methods, including any shortcomings encountered and actions taken where necessary.

2.Classification by automated grading techniques shall be valid only if:

(a)the carcass presentation is identical to the presentation used during the authorisation test; or

(b)it is demonstrated, to the satisfaction of the competent authorities of the Member State concerned, that using a different carcass presentation has no effect on the classification result by the automated grading methods.

(1)

Regulation (EC) No 853/2004 of the European Parliament and of the Council of 29 April 2004 laying down specific hygiene rules for food of animal origin (OJ L 139, 30.4.2004, p. 55).

Back to top

Options/Help