- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/1347 of 13 July 2017 correcting Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EU) No 582/2011 and Commission Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Regulation (EC) No 692/2008 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Annex I is corrected as follows:
point 3.2.12.2.1.3 is replaced by the following:
the number of point ‘3.2.12.7.6.3.’ shall be changed in ‘3.2.12.2.7.6.3.’;
the following points are inserted:
Annex VIII is corrected as follows:
in the table ‘Ambient Temperature Correction Test (ATCT)’ in point 2.1.1 the column ‘Road load matrix family’ is deleted;
the third table in point 3.1 with the columns ‘Road Load Matrix family identifier’ and ‘Variant/versions’ is deleted;
the column ‘Road Load Matrix family identifier’ in the fourth table ‘Results’ in point 3.1 is deleted;
at the bottom of the table ‘Results’ in point 3.1 the following row is added:
‘Frontal area (m2) (for road load matrix family vehicles only)’ |
the footnote 23 in point 3.1 is deleted;
the last line in point 3.1 under the table ‘Results’ is replaced by the following:
‘Repeat for each interpolation family.’;
the third table in point 3.2, with the columns ‘Road Load Matrix family identifier’ and ‘Variant/versions’ is deleted;
the column ‘Road Load Matrix family identifier’ in the fourth table ‘Results’ in point 3.2 is deleted;
the last row of the table ‘Results’ in point 3.2 is replaced by the following:
‘Frontal area (m2) (for road load matrix family vehicles only)’ |
the third table in point 3.3, with the columns ‘Road Load Matrix family identifier’ and ‘Variant/versions’ is deleted;
the column ‘Matrix family identifier’ in the fourth table ‘Results’ in point 3.3 is deleted;
the last row of the table ‘Results’ in point 3.3 is replaced by the following:
‘Frontal area (m2) (for road load matrix family vehicles only)’ |
point 3.5 is replaced by the following:
Repeat for each interpolation family:
Interpolation family identifier [Footnote: “Type Approval Number + Interpolation Family Sequence number”]: …
VH report: …
VL report (if applicable): …
Repeat for each interpolation family:
Interpolation family identifier [Footnote: “Type Approval Number + Interpolation Family Sequence number”]: …
Repeat for each interpolation family:
Interpolation family identifier [Footnote: “Type Approval Number + Interpolation Family Sequence number”]: …’.
Annex IX is corrected as follows:
in Part II, Incomplete Vehicles, Side 2, ‘Vehicle category M1’, ‘Vehicle category N1’, ‘Vehicle category M2’ and ‘Vehicle category N2’, point 49 is replaced by the following:
NEDC values | CO2 emissions | Fuel consumption |
---|---|---|
Urban conditions (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Extra-urban conditions (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Combined (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Weighted (1), combined | … g/km | … l/100 km or m3/100 km or kg/100 km |
Deviation factor (if applicable) | ||
Verification factor (if applicable) | “1” or “0” |
Electric energy consumption (weighted, combined (1)) | … Wh/km | |
Electric range | … km |
NEDC savings: …g/km (if applicable)
WLTP savings: …g/km (if applicable)
WLTP values | CO2 emissions | Fuel consumption |
---|---|---|
Low (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Medium (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
High (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Extra High (1): | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Combined: | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Weighted, combined (1) | … g/km | … l/100 km or m3/100 km or kg/100 km (1) |
Electric energy consumption | … Wh/km | |
Electric range | … km | |
Electric range city | … km |
Electric energy consumption (ECAC,weighted) | … Wh/km | |
Electric range (EAER) | … km | |
Electric range city (EAER city) | … km’; |
in Part I, Complete and Completed Vehicles, Side 2, ‘Vehicle category M3’ and ‘Vehicle category N3’, and in Part II, Incomplete Vehicles, Side 2, ‘Vehicle category M3’ and ‘Vehicle category N3’, point 47.1 is deleted.
in Part I, Complete and Completed Vehicles, Side 2, ‘Vehicle category M2’ and ‘Vehicle category N2’, and in Part II, Incomplete Vehicles, Side 2, ‘Vehicle category M2’ and ‘Vehicle category N2’, a reference to explanatory note ‘(r)’ is added to point 47.1.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: