- Latest available (Revised)
- Point in Time (31/10/2017)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/1981 of 31 October 2017 amending Annex III to Regulation (EC) No 853/2004 of the European Parliament and of the Council as regards temperature conditions during transport of meat (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/10/2017.
There are currently no known outstanding effects for the Commission Regulation (EU) 2017/1981, Article 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Annex III to Regulation (EC) No 853/2004 is amended as follows:
in Section I, Chapter VII, point 3 is replaced by the following:
However, following points (a) and (b) shall apply.
Transport of meat for the production of specific products may take place before the temperature specified in point 1 is attained if the competent authority so authorises, provided that:
such transport takes place in accordance with the requirements that the competent authorities of origin and destination specify in respect of transport from one given establishment to another;
the meat leaves the slaughterhouse, or a cutting room on the same site as the slaughter premises, immediately and transport takes no more than 2 hours;
and,
such transport is justified for technological reasons.
Transport of carcases, half carcases, quarters, or half carcases cut into three wholesale cuts of ovine and caprine animals, bovine animals and porcine animals may commence before the temperature specified in point 1 is attained, provided that all of the following conditions are fulfilled:
the temperature is monitored and recorded within the framework of procedures based on the HACCP principles;
food business operators dispatching and transporting the carcases, half carcases, quarters, or half carcases cut into three wholesale cuts have received documented authorisation from the competent authority at the place of departure to make use of this derogation;
the vehicle transporting the carcases, half carcases, quarters, or half carcases cut into three wholesale cuts are fitted with an instrument that monitors and records air temperatures to which the carcases, half carcases, quarters, or half carcases cut into three wholesale cuts are subjected in such a way that competent authorities are enabled to verify compliance with the time and temperature conditions set out in point (viii);
the vehicle transporting the carcases, half carcases, quarters, or half carcases cut into three wholesale cuts collects meat from only one slaughterhouse per transport;
carcases, half carcases, quarters, or half carcases cut into three wholesale cuts subject to this derogation must have a core temperature of 15 degrees at the start of the transport if they are to be transported in the same compartment as carcases, half carcases, quarters, or half carcases cut into three wholesale cuts which meets the temperature requirement at Point 1 (i.e. 7 degrees);
a declaration by the food business operator accompanies the consignment; that declaration must state the duration of chilling before loading, the time at which loading of the carcases, half carcases, quarters, or half carcases cut into three wholesale cuts were started, the surface temperature at that time, the maximum transportation air temperature to which carcases, half carcases, quarters, or half carcases cut into three wholesale cuts may be subjected, the maximum transport time permitted, the date of authorisation and the name of the competent authority providing the derogation;
the food business operator of destination must notify the competent authorities before he receives for the first time carcases, half carcases, quarters, or half carcases cut into three wholesale cuts, not attaining the temperature specified in point 1 before transport;
such meat is transported in accordance with the following parameters:
for a maximum transport time(1) of 6 hours:
a Maximum surface temperature allowed at loading and thereafter measures at the thickest part of the carcase, half carcases, quarters, or half carcases cut into three wholesale cuts. | ||||
b Maximum time allowed from the moment of killing until the reaching of the maximum surface temperature allowed at loading. | ||||
c The maximum air temperature to which the meat is allowed to be subjected from the moment loading begins, and throughout the whole duration of the transport. | ||||
d Slaughterhouse maximum daily mean carcase aerobic colony count using a rolling window of 10 weeks, allowed for carcases of the relevant species, as assessed by the operator to the satisfaction of the competent authority, according to the sampling and testing procedures laid out in points 2.1.1, 2.1.2 of Chapter 2, and point 3.2 of Chapter 3, of Annex I to Commission Regulation (EC) No 2073/2005 of 15 November 2005 on microbiological criteria for foodstuffs (OJ L 338, 22.12.2005, p. 1). | ||||
Species | Surface temperaturea | Maximum time to chill to surface temperatureb | Maximum transportation air temperaturec | Maximum daily mean carcase aerobic colony countd |
---|---|---|---|---|
Ovine and caprine animals | 7 °C | 8 hours | 6 °C | log10 3,5 cfu/cm2 |
Bovine animals | 20 hours | log10 3,5 cfu/cm2 | ||
Porcine animals | 16 hours | log10 4 cfu/cm2 |
for a maximum transport time(1) of 30 hours:
a The maximum core temperature of the meat allowed at the time of loading, and thereafter. | |||||
Species | Surface temperature (2) | Maximum time to chill to surface temperature (3) | Core temperaturea | Maximum transportation air temperature (4) | Maximum daily mean carcase aerobic colony count (5) |
---|---|---|---|---|---|
Porcine animals | 7 °C | 16 hours | 15 °C | 6 °C | log10 4 cfu/cm2 |
for a maximum transport time(1) of 60 hours:
Species | Surface temperature (2) | Maximum time to chill to surface temperature (3) | Core temperature (6) | Maximum transportation air temperature (4) | Maximum daily mean carcase aerobic colony count (5) |
---|---|---|---|---|---|
Ovine and caprine animals | 4 °C | 12 hours | 15 °C | 3 °C | log10 3 cfu/cm2 |
Bovine animals | 24 hours’; |
in Section I, Chapter V, the following point 5 is added:
Maximum time allowed from the start of loading of meat into the vehicle until the completion of the final delivery. Loading of the meat into the vehicle may be postponed beyond the maximum time allowed for chilling of the meat to its specified surface temperature. If this happens, then the maximum transport time allowed must be shortened by the same length of time by which the loading was postponed. The competent authority of the Member State of destination may limit the number of delivery points.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: