- Latest available (Revised)
- Point in Time (20/11/2017)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/2158 of 20 November 2017 establishing mitigation measures and benchmark levels for the reduction of the presence of acrylamide in food (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 20/11/2017.
There are currently no known outstanding effects for the Commission Regulation (EU) 2017/2158, ANNEX II.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
French fries and other cut (deep fried) potato products:
Potato varieties with lower sugar content shall be used, when available and insofar as compatible with the desired food product to be obtained. In this respect the provider shall be consulted for best suited potato varieties.
Potatoes shall be stored at a temperature higher than 6 °C.
Before the frying process:
Except for frozen potato products for which cooking instructions shall be followed, one of the following measures shall be taken with raw French fries to reduce the sugar content, where possible and insofar as compatible with the desired food product to be obtained:
Washing and soaking preferably for 30 minutes up to 2 hours in cold water. Rinse the strips in clean water before frying.
Soaking for a few minutes in warm water. Rinse the strips in clean water before frying.
Blanching of potatoes results in lower levels of acrylamide and therefore where possible, it is appropriate to blanch potatoes.
When frying French fries or other potato products:
Frying oils and fats shall be used which allows to fry quicker and/or at lower temperatures. Cooking oil suppliers shall be consulted for the best suited oils and fats.
Frying temperatures shall be below 175 °C and in any case as low as possible taking into account the food safety requirements.
Frying oils and fats quality shall be maintained by skimming frequently to remove fines and crumbs.
For the cooking of French fries, it is appropriate that the FBOs make use of available colour guides providing guidance on the optimal combination of colour and low levels of acrylamide.
It is appropriate that a colour guide providing guidance on the optimal combination of colour and low levels of acrylamide is visibly displayed at the premises to the staff preparing the food.
Insofar possible and compatible with the production process and hygiene requirements:
the extension of yeast fermentation time;
the moisture content of the dough for the production of a product with low moisture content, shall be optimised;
the lowering of oven temperature and the extension cooking time.
Products shall be baked to a lighter colour endpoint and dark roasting of crust shall be avoided in case the dark colour of the crust is the result of the strong roasting and not related to the specific composition or nature of the bread resulting in a dark crust.
The abovementioned colour guide providing guidance on the optimal combination of colour and low levels of acrylamide shall be visibly displayed at the premises to the staff preparing the specific food.
FBOs shall accept products referred to in Article 1(2) only from FBOs that have implemented all mitigation measures set out in Annex I.
FBOs shall:
follow the instructions on storage of provided by the FBOs or the suppliers or provided for in the relevant mitigation measures in Annex I;
work with Standard Operational Procedures and calibrated fryers equipped with computerised timers and programmed to standard settings (time-temperature);
monitor the level of acrylamide in finished products to verify that the mitigation measures are effective in keeping acrylamide levels below the benchmark level.
FBOs shall monitor the level of acrylamide in finished products to verify that the mitigation measures are effective in keeping acrylamide levels below the benchmark level.
FBOs shall ensure that the level of acrylamide in supplied coffee is lower than the benchmark level specified in Annex IV taking into account however that this may not be possible for all coffee types depending on blend and roast characteristics. In these cases a justification is provided by the supplier.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: