xmlns:atom="http://www.w3.org/2005/Atom"

ANNEX VI VERIFYING TRANSMISSION, TORQUE CONVERTER, OTHER TORQUE TRANSFERRING COMPONENT AND ADDITIONAL DRIVELINE COMPONENT DATA

Appendix 2 Transmission information document

PART 1 ESSENTIAL CHARACTERISTICS OF THE (PARENT) TRANSMISSION AND THE TRANSMISSION TYPES WITHIN A TRANSMISSION FAMILY

Parent transmission Family members
or transmission type
#1 #2 #3

0.0GENERAL

0.1Make (trade name of manufacturer)
0.2Type
0.3Commercial name(s) (if available)
0.4Means of identification of type
0.5Location of that marking
0.6Name and address of manufacturer
0.7Location and method of affixing of the approval mark
0.8Name(s) and address (es) of assembly plant(s)
0.9Name and address of the manufacturer's representative (if any)

1.0SPECIFIC TRANSMISSION/TRANSMISSION FAMILY INFORMATION

1.1Gear ratio. Gearscheme and powerflow
1.2Center distance for countershaft transmissions
1.3Type of bearings at corresponding positions (if fitted)
1.4Type of shift elements (tooth clutches, including synchronisers or friction clutches) at corresponding positions (where fitted)
1.5Single gear width for Option 1 or Single gear width ± 1 mm for Option 2 or Option 3
1.6Total number of forward gears
1.7Number of tooth shift clutches
1.8Number of synchronizers
1.9Number of friction clutch plates (except for single dry clutch with 1 or 2 plates)
1.10Outer diameter of friction clutch plates (except for single dry clutch with 1 or 2 plates)
1.11Surface roughness of the teeth (incl. drawings)
1.12Number of dynamic shaft seals
1.13Oil flow for lubrication and cooling per transmission input shaft revolution
1.14Oil viscosity at 100 °C (± 10 %)
1.15System pressure for hydraulically controlled gearboxes
1.16Specified oil level in reference to central axis and in accordance with the drawing specification (based on average value between lower and upper tolerance) in static or running condition. The oil level is considered as equal if all rotating transmission parts (except for the oil pump and the drive thereof) are located above the specified oil level
1.17Specified oil level (± 1 mm)
1.18Gear ratios [-] and maximum input torque [Nm], maximum input power (kW) and maximum input speed [rpm]