Commission Regulation (EU) 2017/2400Show full title

Appendix 3 Hydrodynamic torque converter (TC) information document

Information document no.:

Issue: Date of issue: Date of Amendment:

pursuant to …

TC type:

…

0. GENERAL

0.1 Name and address of manufacturer

0.2 Make (trade name of manufacturer):

0.3 TC type:

0.4 TC family:

0.5 TC type as separate technical unit / TC family as separate technical unit

0.6 Commercial name(s) (if available):

0.7 Means of identification of model, if marked on the TC:

0.8 In the case of components and separate technical units, location and method of affixing of the EC approval mark:

0.9 Name(s) and address(es) of assembly plant(s):

0.10 Name and address of the manufacturer's representative:

PART 1 ESSENTIAL CHARACTERISTICS OF THE (PARENT) TC AND THE TC TYPES WITHIN A TC FAMILY

	Parent TC or	Family members
	TC type	#1	#2	#3

0.0 GENERAL

0.1 Make (trade name of manufacturer)

0.2 Type

0.3 Commercial name(s) (if available)

0.4 Means of identification of type

0.5 Location of that marking

0.6 Name and address of manufacturer

0.7 Location and method of affixing of the approval mark

0.8. Name(s) and address (es) of assembly plant(s)

0.9. Name and address of the manufacturer's representative (if any)

1.0 SPECIFIC TORQUE CONVERTER/TORQUE CONVERTER FAMILY INFORMATION

1.1 For hydrodynamic torque converter without mechanical transmission (serial arrangement).

1.1.1 Outer torus diameter

1.1.2 Inner torus diameter

1.1.3 Arrangement of pump (P), turbine (T) and stator (S) in flow direction

1.1.4 Torus width

1.1.5 Oil type according to test specification

1.1.6 Blade design

1.2 For hydrodynamic torque converter with mechanical transmission (parallel arrangement).

1.2.1 Outer torus diameter

1.2.2 Inner torus diameter

1.2.3 Arrangement of pump (P), turbine (T) and stator (S) in flow direction

1.2.4 Torus width

1.2.5 Oil type according to test specification

1.2.6 Blade design

1.2.7 Gear scheme and power flow in torque converter mode

1.2.8 Type of bearings at corresponding positions (if fitted)

1.2.9 Type of cooling/lubrication pump (referring to parts list)

1.2.10 Type of shift elements (tooth clutches (including synchronisers) OR friction clutches) at corresponding positions where fitted

1.2.11 Oil level according to drawing in reference to central axis

LIST OF ATTACHMENTS

No.:	Description:	Date of issue:
1	Information on Torque Converter test conditions	…
2	…

Attachment 1 to Torque Converter information document Information on test conditions (if applicable)

1. Method of measurement

1.1 TC with mechanical transmission

yes/no

1.2 TC as separate unit

yes/no