Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance) (c. 2400)

ANNEX VI VERIFYING TRANSMISSION, TORQUE CONVERTER, OTHER TORQUE TRANSFERRING COMPONENT AND ADDITIONAL DRIVELINE COMPONENT DATA

Appendix 5 Additional driveline components (ADC) information document

PART 1 ESSENTIAL CHARACTERISTICS OF THE (PARENT) ADC AND THE ADC TYPES WITHIN AN ADC FAMILY

	Parent-ADC	Family member
		#1	#2	#3

0.0 GENERAL

0.1 Make (trade name of manufacturer)

0.2 Type

0.3 Commercial name(s) (if available)

0.4 Means of identification of type

0.5 Location of that marking

0.6 Name and address of manufacturer

0.7 Location and method of affixing of the approval mark

0.8. Name(s) and address (es) of assembly plant(s)

0.9. Name and address of the manufacturer's representative (if any)

1.0 SPECIFIC ADC/ANGLE DRIVE INFORMATION

1.1 Gear ratio and gearscheme

1.2 Angle between input/output shaft

1.3 Type of bearings at corresponding positions

1.4 Number of teeth per gearwheel

1.5 Single gear width

1.6 Number of dynamic shaft seals

1.7 Oil viscosity (± 10 %)

1.8 Surface roughness of the teeth

1.9 Specified oil level in reference to central axis and in accordance with the drawing specification (based on average value between lower and upper tolerance) in static or running condition. The oil level is considered as equal if all rotating transmission parts (except for the oil pump and the drive thereof) are located above the specified oil level

1.10 Oil level within (± 1mm).