ANNEX VII U.K. VERIFYING AXLE DATA

Appendix 6

Input parameters for the simulation tool U.K.

Introduction U.K.

This Appendix describes the list of parameters to be provided by the component manufacturer as input to the simulation tool. The applicable XML schema as well as example data are available at the dedicated electronic distribution platform.

Definitions U.K.

[F1 (1) ‘Parameter ID’:

Unique identifier as used in the simulation tool for a specific input parameter or set of input data]

(2) ‘Type’:

Data type of the parameter

string …

sequence of characters in ISO8859-1 encoding

token …

sequence of characters in ISO8859-1 encoding, no leading/trailing whitespace

date …

date and time in UTC time in the format: YYYY-MM-DD T HH:MM:SS Z with italic letters denoting fixed characters e.g. ‘2002-05-30T09:30:10Z’

integer …

value with an integral data type, no leading zeros, e.g. ‘1800’

double, X …

fractional number with exactly X digits after the decimal sign (‘.’) and no leading zeros e.g. for ‘double, 2’: ‘2345.67’; for ‘double, 4’: ‘45.6780’

(3) ‘Unit’ …

physical unit of the parameter

Textual Amendments

F1 Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).

Set of input parameters U.K.

Table 1

Input parameters ‘Axlegear/General’

Parameter name	Param ID	Type	Unit	Description/Reference
Manufacturer	P215	token	[-]
Model	P216	token	[-]
[F1 CertificationNumber	P217	token	[-]	]
Date	P218	dateTime	[-]	Date and time when the component-hash is created
AppVersion	P219	token	[-]
LineType	P253	string	[-]	Allowed values: ‘Single reduction axle’, ‘Single portal axle’, ‘Hub reduction axle’, ‘Single reduction tandem axle’, ‘Hub reduction tandem axle’
Ratio	P150	double, 3	[-]
CertificationMethod	P256	string	[-]	Allowed values: ‘Measured’, ‘Standard values’

Table 2

Input parameters ‘Axlegear/LossMap’ for each grid point in the loss map

Parameter name	Param ID	Type	Unit	Description/Reference
InputSpeed	P151	double, 2	[1/min]
InputTorque	P152	double, 2	[Nm]
TorqueLoss	P153	double, 2	[Nm]