- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Regulation (EU) 2017/2402 of the European Parliament and of the Council of 12 December 2017 laying down a general framework for securitisation and creating a specific framework for simple, transparent and standardised securitisation, and amending Directives 2009/65/EC, 2009/138/EC and 2011/61/EU and Regulations (EC) No 1060/2009 and (EU) No 648/2012
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 31/01/2020. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Regulation (EU) 2017/2402 of the European Parliament and of the Council, Article 27 is up to date with all changes known to be in force on or before 12 October 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
1.Originators and sponsors shall jointly notify ESMA by means of the template referred to in paragraph 7 of this Article where a securitisation meets the requirements of Articles 19 to 22 or Articles 23 to 26 (‘STS notification’). In the case of an ABCP programme, only the sponsor shall be responsible for the notification of that programme and, within that programme, of the ABCP transactions complying with Article 24.
The STS notification shall include an explanation by the originator and sponsor of how each of the STS criteria set out in Articles 20 to 22 or Articles 24 to 26 has been complied with.
ESMA shall publish the STS notification on its official website pursuant to paragraph 5. Originators and sponsors of a securitisation shall inform their competent authorities of the STS notification and designate amongst themselves one entity to be the first contact point for investors and competent authorities.
2.The originator, sponsor or SSPE may use the service of a third party authorised under Article 28 to check whether a securitisation complies with Articles 19 to 22 or Articles 23 to 26. However, the use of such a service shall not, under any circumstances, affect the liability of the originator, sponsor or SSPE in respect of their legal obligations under this Regulation. The use of such service shall not affect the obligations imposed on institutional investors as set out in Article 5.
Where the originator, sponsor or SSPE use the service of a third party authorised pursuant to Article 28 to assess whether a securitisation complies with Articles 19 to 22 or Articles 23 to 26, the STS notification shall include a statement that compliance with the STS criteria was confirmed by that authorised third party. The notification shall include the name of the authorised third party, its place of establishment and the name of the competent authority that authorised it.
3.Where the originator or original lender is not a credit institution or investment firm, as defined in points (1) and (2) of Article 4(1) of Regulation (EU) No 575/2013, established in the Union, the notification pursuant to paragraph 1 of this Article shall be accompanied by the following:
(a)confirmation by the originator or original lender that its credit-granting is done on the basis of sound and well-defined criteria and clearly established processes for approving, amending, renewing and financing credits and that the originator or original lender has effective systems in place to apply such processes in accordance with Article 9 of this Regulation; and
(b)a declaration by the originator or original lender as to whether credit granting referred to in point (a) is subject to supervision.
4.The originator and sponsor shall immediately notify ESMA and inform their competent authority when a securitisation no longer meets the requirements of either Articles 19 to 22 or Articles 23 to 26.
5.ESMA shall maintain on its official website a list of all securitisations which the originators and sponsors have notified to it as meeting the requirements of Articles 19 to 22 or Articles 23 to 26. ESMA shall add each securitisation so notified to that list immediately and shall update the list where the securitisations are no longer considered to be STS following a decision of competent authorities or a notification by the originator or sponsor. Where the competent authority has imposed administrative sanctions in accordance with Article 32, it shall notify ESMA thereof immediately. ESMA shall immediately indicate on the list that a competent authority has imposed administrative sanctions in relation to the securitisation concerned.
6.ESMA, in close cooperation with the EBA and EIOPA, shall develop draft regulatory technical standards specifying the information that the originator, sponsor and SSPE are required to provide in order to comply with the obligations referred to in paragraph 1.
ESMA shall submit those draft regulatory technical standards to the Commission by 18 July 2018.
The Commission is empowered to supplement this Regulation by adopting the regulatory technical standards referred to in this paragraph in accordance with Articles 10 to 14 of Regulation (EU) No 1095/2010.
7.In order to ensure uniform conditions for the implementation of this Regulation, ESMA, in close cooperation with the EBA and EIOPA, shall develop draft implementing technical standards to establish the templates to be used for the provision of the information referred to in paragraph 6.
ESMA shall submit those draft implementing technical standards to the Commission by 18 July 2018.
Power is conferred on the Commission to adopt the implementing technical standards referred to in this paragraph in accordance with Article 15 of Regulation (EU) No 1095/2010.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: