Commission Implementing Regulation (EU) 2017/53 of 14 December 2016 concerning the authorisation of butan-1-ol, hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate as feed additives for all animal species (Text with EEA relevance)

Status:

This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version

ANNEX

Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
^a Details of the analytical methods are available at the following address of the European Union Reference Laboratory for Feed Additives: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports
Identification number of the additive	Name of the holder of authorisation	Additive		Species or category of animal	Maximum age	mg of active substance/kg of complete feedingstuff with a moisture content of 12 %		Other provisions	End of period of authorisation
(1)	(2)	(3)	(4)	(5)	(6)	(7)		(8)	(9)
Category: Sensory additives. Functional group: Flavouring compounds
2b02004	—	Butan-1-ol	Additive composition Butan-1-ol Characterisation of the active substance Butan-1-ol Produced by chemical synthesis Purity: min. 99,5 % Chemical formula: C₄H₁₀O CAS number 71-36-3 FLAVIS 02.004 Method of analysis ^a For the determination of Butan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02005	—	Hexan-1-ol	Additive composition Hexan-1-ol Characterisation of the active substance Hexan-1-ol Produced by chemical synthesis Purity: min. 96,5 % Chemical formula: C₆H₁₄O CAS number 111-27-3 FLAVIS 02.005 Method of analysis ^a For the determination of Hexan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02006	—	Octan-1-ol	Additive composition Octan-1-ol Characterisation of the active substance Octan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₈H₁₈O CAS number 111-87-5 FLAVIS 02.006 Method of analysis ^a For the determination of Octan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b02007	—	Nonan-1-ol	Additive composition Nonan-1-ol Characterisation of the active substance Nonan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₉H₂₀O CAS number 143-08-8 FLAVIS 02.007 Method of analysis ^a For the determination of Nonan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b02008	—	Dodecan-1-ol	Additive composition Dodecan-1-ol Characterisation of the active substance Dodecan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₁₂H₂₆O CAS number 112-53-8 FLAVIS 02.008 Method of analysis ^a For the determination of Dodecan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02021	—	Heptan-1-ol	Additive composition Heptan-1-ol Characterisation of the active substance Heptan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₇H₁₆O CAS number 111-70-6 FLAVIS 02.021 Method of analysis ^a For the determination of Heptan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02024	—	Decan-1-ol	Additive composition Decan-1-ol Characterisation of the active substance Decan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₀H₂₂O CAS number 112-30-1 FLAVIS 02.024 Method of analysis ^a For the determination of Decan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02040	—	Pentan-1-ol	Additive composition Pentan-1-ol Characterisation of the active substance Pentan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₅H₁₂O CAS number 71-41-0 FLAVIS 02.040 Method of analysis ^a For the determination of Pentan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02078	—	Ethanol	Additive composition Ethanol Characterisation of the active substance Ethanol Produced by chemical synthesis or enzymatic fermentation. Purity: min. 95 % Chemical formula: C₂H₆O CAS number 64-17-5 FLAVIS 02.078 Method of analysis ^a For the determination of Ethanol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05001	—	Acetaldehyde	Additive composition Acetaldehyde Characterisation of the active substance Acetaldehyde Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₂H₄O CAS number 75-07-0 FLAVIS 05.001 Method of analysis ^a For the determination of Acetaldehyde in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05002	—	Propanal	Additive composition Propanal Characterisation of the active substance Propanal Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₃H₆O CAS number 123-38-6 FLAVIS 05.002 Method of analysis ^a For the determination of Propanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05003	—	Butanal	Additive composition Butanal Characterisation of the active substance Butanal Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₆H₈O CAS number 123-72-8 FLAVIS 05.003 Method of analysis ^a For the determination of Butanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05005	—	Pentanal	Additive composition Pentanal Characterisation of the active substance Pentanal Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₅H₁₀O CAS number 110-62-3 FLAVIS 05.005 Method of analysis ^a For the determination of Pentanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05008	—	Hexanal	Additive composition Hexanal Characterisation of the active substance Hexanal Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₆H₁₂O CAS number 66-25-1 FLAVIS 05.008 Method of analysis ^a For the determination of Hexanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05009	—	Octanal	Additive composition Octanal Characterisation of the active substance Octanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₈H₁₆O CAS number 124-13-0 FLAVIS 05.009 Method of analysis ^a For the determination of Octanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05010	—	Decanal	Additive composition Decanal Characterisation of the active substance Decanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₁₀H₂₀O CAS number 112-31-2 FLAVIS 05.010 Method of analysis ^a For the determination of Decanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05011	—	Dodecanal	Additive composition Dodecanal Characterisation of the active substance Dodecanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₁₂H₂₄O CAS number 112-54-9 FLAVIS 05.011 Method of analysis ^a For the determination of Dodecanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05025	—	Nonanal	Additive composition Nonanal Characterisation of the active substance Nonanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₉H₁₈O CAS number 124-19-6 FLAVIS 05.025 Method of analysis ^a For the determination of Nonanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05031	—	Heptanal	Additive composition Heptanal Characterisation of the active substance Heptanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₇H₁₄O CAS number 111-71-7 FLAVIS 05.031 Method of analysis ^a For the determination of Heptanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05034	—	Undecanal	Additive composition Undecanal Characterisation of the active substance Undecanal Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₁₁H₂₂O CAS number 112-44-7 FLAVIS 05.034 Method of analysis ^a For the determination of Undecanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b06001	—	1,1-Diethoxyethane	Additive composition 1,1-Diethoxyethane Characterisation of the active substance 1,1-Diethoxyethane Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₆H₁₄O₂ CAS number 105-57-7 FLAVIS 06.001 Method of analysis ^a For the determination of 1,1-Diethoxyethane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08001	—	Formic acid	Additive composition Formic acid Characterisation of the active substance Formic acid Produced by chemical synthesis Purity: min. 95 % Chemical formula: CH₂O₂ CAS number 64-18-6 FLAVIS 08.001 Method of analysis ^a For the determination of Formic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—		1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08002	—	Acetic acid	Additive composition Acetic acid Characterisation of the active substance Acetic acid Produced by chemical synthesis Purity: min. 99,5 % Chemical formula: C₂H₄O₂ CAS number 64-19-7 FLAVIS 08.002 Method of analysis ^a For the determination of Acetic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
1k280	—	Propionic acid	Additive composition Propionic acid Characterisation of the active substance Propionic acid Produced by chemical synthesis Purity: min. 99,5 % Non-volatile residue ≤ 0,01 % when dried at 140 °C to constant weight. Aldehydes ≤ 0,1 % expressed as formaldehyde Chemical formula: C₃H₆O₂ CAS number 79-09-4 FLAVIS 08.003 Method of analysis ^a For the determination of Propionic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08007	—	Valeric acid	Additive composition Valeric acid Characterisation of the active substance Valeric acid Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₅H₁₀O₂ CAS number 109-52-4 FLAVIS 08.007 Method of analysis ^a For the determination of Valeric acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08009	—	Hexanoic acid	Additive composition Hexanoic acid Characterisation of the active substance Hexanoic acid Produced by chemical modification of extracted fats Purity: min. 98 % Chemical formula: C₆H₁₂O₂ CAS number 142-62-1 FLAVIS 08.009 Method of analysis ^a For the determination of Hexanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08010	—	Octanoic acid	Additive composition Octanoic acid Characterisation of the active substance Octanoic acid Produced by fermentation followed by fractional distillation. Purity: min. 97 % Chemical formula: C₈H₁₆O₂ CAS number 124-07-2 FLAVIS 08.010 Method of analysis ^a For the determination of octanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08011	—	Decanoic acid	Additive composition Decanoic acid Characterisation of the active substance Decanoic acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₀H₂₀O₂ CAS number 334-48-5 FLAVIS 08.011 Method of analysis ^a For the determination of Decanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08012	—	Dodecanoic acid	Additive composition Dodecanoic acid Characterisation of the active substance Dodecanoic acid Produced by chemical synthesis Purity: min. 90 % Chemical formula: C₁₂H₂₄O₂ CAS number 143-07-7 FLAVIS 08.012 Method of analysis ^a For the determination of Dodecanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08013	—	Oleic acid	Additive composition Oleic acid Characterisation of the active substance Oleic acid Produced by chemical synthesis Purity: min. 90 % Chemical formula: C₁₈H₃₄O₂ CAS number 112-80-1 FLAVIS 08.013 Method of analysis ^a For the determination of Oleic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08014	—	Hexadecanoic acid	Additive composition Hexadecanoic acid Characterisation of the active substance Hexadecanoic acid Produced by chemical synthesis Purity: min. 80 % Chemical formula: C₁₆H₃₂O₂ CAS number 57-10-3 FLAVIS 08.014 Method of analysis ^a For the determination of Hexadecanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08016	—	Tetradecanoic acid	Additive composition Tetradecanoic acid Characterisation of the active substance Tetradecanoic acid Produced by chemical synthesis Purity: min. 94 % Chemical formula: C₁₄H₂₈O₂ CAS number 544-63-8 FLAVIS 08.016 Method of analysis ^a For the determination of Tetradecanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08028	—	Heptanoic acid	Additive composition Heptanoic acid Characterisation of the active substance Heptanoic acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₇H₁₄O₂ CAS number 111-14-8 FLAVIS 08.028 Method of analysis ^a For the determination of Heptanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08029	—	Nonanoic acid	Additive composition Nonanoic acid Characterisation of the active substance Nonanoic acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C9H18O2 CAS number 112-05-0 FLAVIS 08.029 Method of analysis ^a For the determination of Nonanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09001	—	Ethyl acetate	Additive composition Ethyl acetate Characterisation of the active substance Ethyl acetate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₄H₈O₂ CAS number 141-78-6 FLAVIS 09.001 Method of analysis ^a For the determination of Ethyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09002	—	Propyl acetate	Additive composition Propyl acetate Characterisation of the active substance Propyl acetate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₅H₁₀O₂ CAS number 109-60-4 FLAVIS 09.002 Method of analysis ^a For the determination of Propyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09004	—	Butyl acetate	Additive composition Butyl acetate Characterisation of the active substance Butyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₆H₁₂O₂ CAS number 123-86-4 FLAVIS 09.004 Method of analysis ^a For the determination of Butyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09006	—	Hexyl acetate	Additive composition Hexyl acetate Characterisation of the active substance Hexyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₈H₁₂O₂ CAS number 142-92-7 FLAVIS 09.006 Method of analysis ^a For the determination of Hexyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09007	—	Octyl acetate	Additive composition Octyl acetate Characterisation of the active substance Octyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₀H₂₀O₂ CAS number 112-14-1 FLAVIS 09.007 Method of analysis ^a For the determination of Octyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09008	—	Nonyl acetate	Additive composition Nonyl acetate Characterisation of the active substance Nonyl acetate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₁₁H₂₂O₂ CAS number 143-13-5 FLAVIS 09.008 Method of analysis ^a For the determination of Nonyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09009	—	Decyl acetate	Additive composition Decyl acetate Characterisation of the active substance Decyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₂H₂₄O₂ CAS number 112-17-4 FLAVIS 09.009 Method of analysis ^a For the determination of Decyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09010	—	Dodecyl acetate	Additive composition Dodecyl acetate Characterisation of the active substance Dodecyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₄H₂₈O₂ CAS number 112-66-3 FLAVIS 09.010 Method of analysis ^a For the determination of Dodecyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09022	—	Heptyl acetate	Additive composition Heptyl acetate Characterisation of the active substance Heptyl acetate Produced by chemical synthesis Purity: min. 97,5 % Chemical formula: C₉H₁₈O₂ CAS number 112-06-1 FLAVIS 09.022 Method of analysis ^a For the determination of Heptyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09023	—	Methyl acetate	Additive composition Methyl acetate Characterisation of the active substance Methyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₃H₆O₂ CAS number 79-20-9 FLAVIS 09.023 Method of analysis ^a For the determination of Methyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09038	—	Methyl butyrate	Additive composition Methyl butyrate Characterisation of the active substance Methyl butyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₅H₁₀O₂ CAS number 623-42-7 FLAVIS 09.038 Method of analysis ^a For the determination of Methyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09042	—	Butyl butyrate	Additive composition Butyl butyrate Characterisation of the active substance Butyl butyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₈H₁₆O₂ CAS number 109-21-7 FLAVIS 09.042 Method of analysis ^a For the determination of Butyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09044	—	Pentyl butyrate	Additive composition Pentyl butyrate Characterisation of the active substance Pentyl butyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₉H₁₈O₂ CAS number 540-18-1 FLAVIS 09.044 Method of analysis ^a For the determination of Pentyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09045	—	Hexyl butyrate	Additive composition Hexyl butyrate Characterisation of the active substance Hexyl butyrate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₁₀H₂₀O₂ CAS number 2639-63-6 FLAVIS 09.045 Method of analysis ^a For the determination of Hexyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09046	—	Octyl butyrate	Additive composition Octyl butyrate Characterisation of the active substance Octyl butyrate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₁₂H₂₄O₂ CAS number 110-39-4 FLAVIS 09.046 Method of analysis ^a For the determination of Octyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09059	—	Ethyl decanoate	Additive composition Ethyl decanoate Characterisation of the active substance Ethyl decanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₂H₂₄O₂ CAS number 110-38-3 FLAVIS 09.059 Method of analysis ^a For the determination of Ethyl decanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09060	—	Ethyl hexanoate	Additive composition Ethyl hexanoate Characterisation of the active substance Ethyl hexanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₈H₁₆O₂ CAS number 123-66-0 FLAVIS 09.060 Method of analysis ^a For the determination of Ethyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09061	—	Propyl hexanoate	Additive composition Propyl hexanoate Characterisation of the active substance Propyl hexanoate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₉H₁₈O₂ CAS number 626-77-7 FLAVIS 09.061 Method of analysis ^a For the determination of Propyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09065	—	Pentyl hexanoate	Additive composition Pentyl hexanoate Characterisation of the active substance Pentyl hexanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₁H₂₂O₂ CAS number 540-07-8 FLAVIS 09.065 Method of analysis ^a For the determination of Pentyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09066	—	Hexyl hexanoate	Additive composition Hexyl hexanoate Characterisation of the active substance Hexyl hexanoate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₁₂H₂₄O₂ CAS number 6378-65-0 FLAVIS 09.066 Method of analysis ^a For the determination of Hexyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09069	—	Methyl hexanoate	Additive composition Methyl hexanoate Characterisation of the active substance Methyl hexanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₇H₁₄O₂ CAS number 106-70-7 FLAVIS 09.069 Method of analysis ^a For the determination of Methyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09072	—	Ethyl formate	Additive composition Ethyl formate Characterisation of the active substance Ethyl formate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₃H₆O₂ CAS number 109-94-4 FLAVIS 09.072 Method of analysis ^a For the determination of Ethyl formate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09099	—	Ethyl dodecanoate	Additive composition Ethyl dodecanoate Characterisation of the active substance Ethyl dodecanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₄H₂₈O₂ CAS number 106-33-2 FLAVIS 09.099 Method of analysis ^a For the determination of Ethyl dodecanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09104	—	Ethyl tetradecanoate	Additive composition Ethyl tetradecanoate Characterisation of the active substance Ethyl tetradecanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₆H₃₂O₂ CAS number 124-06-1 FLAVIS 09.104 Method of analysis ^a For the determination of Ethyl tetradecanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09107	—	Ethyl nonanoate	Additive composition Ethyl nonanoate Characterisation of the active substance Ethyl nonanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₁H₂₂O₂ CAS number 123-29-5 FLAVIS 09.107 Method of analysis ^a For the determination of Ethyl nonanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09111	—	Ethyl octanoate	Additive composition Ethyl octanoate Characterisation of the active substance Ethyl octanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₀H₂₀O₂ CAS number 106-32-1 FLAVIS 09.111 Method of analysis ^a For the determination of Ethyl octanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09121	—	Ethyl propionate	Additive composition Ethyl propionate Characterisation of the active substance Ethyl propionate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₅H₁₀O₂ CAS number 105-37-3 FLAVIS 09.121 Method of analysis ^a For the determination of Ethyl propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09134	—	Methyl propionate	Additive composition Methyl propionate Characterisation of the active substance Methyl propionate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₄H₈O₂ CAS number 554-12-1 FLAVIS 09.134 Method of analysis ^a For the determination of Methyl propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09147	—	Ethyl valerate	Additive composition Ethyl valerate Characterisation of the active substance Ethyl valerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₇H₁₄O₂ CAS number 539-82-2 FLAVIS 09.147 Method of analysis ^a For the determination of Ethyl valerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09148	—	Butyl valerate	Additive composition Butyl valerate Characterisation of the active substance Butyl valerate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₉H₁₈O₂ CAS number 591-68-4 FLAVIS 09.148 Method of analysis ^a For the determination of Butyl valerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09191	—	Ethyl hex-3-enoate	Additive composition Ethyl hex-3-enoate Characterisation of the active substance Ethyl hex-3-enoate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₈H₁₄O₂ CAS number 2396-83-0 FLAVIS 09.191 Method of analysis ^a For the identification of Ethyl hex-3-enoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b09193	—	Ethyl hexadecanoate	Additive composition Ethyl hexadecanoate Characterisation of the active substance Ethyl hexadecanoate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₁₈H₃₆O₂ CAS number 628-97-7 FLAVIS 09.193 Method of analysis ^a For the determination of Ethyl hexadecanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09248	—	Ethyl trans-2-butenoate	Additive composition Ethyl trans-2-butenoate Characterisation of the active substance Ethyl trans-2-butenoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₆H₁₀O₂ CAS number 623-70-1 FLAVIS 09.248 Method of analysis ^a For the identification of Ethyl trans-2-butenoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09274	—	Ethyl undecanoate	Additive composition Ethyl undecanoate Characterisation of the active substance Ethyl undecanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₃H₂₆O₂ CAS number 627-90-7 FLAVIS 09.274 Method of analysis ^a For the determination of Ethyl undecanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09449	—	Butyl isovalerate	Additive composition Butyl isovalerate Characterisation of the active substance Butyl isovalerate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C₉H₁₈O₂ CAS number 109-19-3 FLAVIS 09.449 Method of analysis ^a For the identification of Butyl isovalerate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09478	—	Hexyl isobutyrate	Additive composition Hexyl isobutyrate Characterisation of the active substance Hexyl isobutyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₁₀H₂₀O₂ CAS number 2349-07-7 FLAVIS 09.478 Method of analysis ^a For the identification of Hexyl isobutyrate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09483	—	Methyl 2-methylbutyrate	Additive composition Methyl 2-methylbutyrate Characterisation of the active substance Methyl 2-methylbutyrate Produced by chemical synthesis Purity: min. 92 % Chemical formula: C₆H₁₂O₂ CAS number 868-57-5 FLAVIS 09.483 Method of analysis ^a For the identification of Methyl 2-methylbutyrate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09507	—	Hexyl 2-methylbutyrate	Additive composition Hexyl 2-methylbutyrate Characterisation of the active substance Hexyl 2-methylbutyrate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₁₁H₂₂O₂ CAS number 10032-15-2 FLAVIS 09.507 Method of analysis ^a For the identification of Hexyl 2-methylbutyrate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09512	—	Triethyl citrate	Additive composition Triethyl citrate Characterisation of the active substance Triethyl citrate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C₁₂H₂₀O₇ CAS number 77-93-0 FLAVIS 09.512 Method of analysis ^a For the determination of Triethyl citrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09529	—	Hexyl isovalerate	Additive composition Hexyl isovalerate Characterisation of the active substance Hexyl isovalerate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C₁₁H₂₂O₂ CAS number 10032-13-0 FLAVIS 09.529 Method of analysis ^a For the identification of Hexyl isovalerate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09549	—	Methyl 2-methylvalerate	Additive composition Methyl 2-methylvalerate Characterisation of the active substance Methyl 2-methylvalerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C₇H₁₄O₂ CAS number 2177-77-7 FLAVIS 09.549 Method of analysis ^a For the identification of Methyl 2-methylvalerate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027

Previous: Signature
Next

legislation.gov.uk

Search Legislation

Commission Implementing Regulation (EU) 2017/53Show full title

You are here:

What Version

Opening Options

More Resources

Legislation originating from the EU

This item of legislation originated from the EU

Status:

ANNEX

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Additive composition

Characterisation of the active substance

Method of analysis a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a

Method of analysis ^a