xmlns:atom="http://www.w3.org/2005/Atom"

ANNEX

a

Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports

Identification number of the additiveName of the holder of authorisationAdditiveComposition, chemical formula, description, analytical methodSpecies or category of animalMaximum ageMinimum contentMaximum contentOther provisionsEnd of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b04004Isoeugenol

Additive composition

Isoeugenol

Characterisation of the active substance

Isoeugenol

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C10H12O2

CAS number 97-54-1

FLAVIS No 04.004

Method of analysis a

For the identification of isoeugenol in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

Pigs

Ruminants and horses except those producing milk for human consumption

Pets

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be:

5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027