- Latest available (Revised)
- Point in Time (17/11/2023)
- Original (As adopted by EU)
Regulation (EU) 2017/625 of the European Parliament and of the Council of 15 March 2017 on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products, amending Regulations (EC) No 999/2001, (EC) No 396/2005, (EC) No 1069/2009, (EC) No 1107/2009, (EU) No 1151/2012, (EU) No 652/2014, (EU) 2016/429 and (EU) 2016/2031 of the European Parliament and of the Council, Council Regulations (EC) No 1/2005 and (EC) No 1099/2009 and Council Directives 98/58/EC, 1999/74/EC, 2007/43/EC, 2008/119/EC and 2008/120/EC, and repealing Regulations (EC) No 854/2004 and (EC) No 882/2004 of the European Parliament and of the Council, Council Directives 89/608/EEC, 89/662/EEC, 90/425/EEC, 91/496/EEC, 96/23/EC, 96/93/EC and 97/78/EC and Council Decision 92/438/EEC (Official Controls Regulation) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 17/11/2023.
There are currently no known outstanding effects for the Regulation (EU) 2017/625 of the European Parliament and of the Council, ANNEX III.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Methods of analysis and measurement results should be characterised by the following criteria:
accuracy (trueness and precision),
applicability (matrix and concentration range),
limit of detection,
limit of quantification,
precision,
repeatability,
reproducibility,
recovery,
selectivity,
sensitivity,
linearity,
measurement uncertainty,
other criteria that may be selected as required.
The precision values referred to in point 1(e) shall either be obtained from a collaborative trial which has been conducted in accordance with an internationally recognised protocol on collaborative trials (e.g. ISO 5725 ‘Accuracy (trueness and precision) of measurement methods and results’) or, where performance criteria for analytical methods have been established, be based on criteria compliance tests. The repeatability and reproducibility values shall be expressed in an internationally recognised form (e.g. the 95 % confidence intervals as defined by ISO 5725 ‘Accuracy (trueness and precision) of measurement methods and results’). The results from the collaborative trial shall be published or freely available.
Methods of analysis which are applicable uniformly to various groups of commodities should be given preference over methods which apply only to individual commodities.
In situations where methods of analysis can only be validated within a single laboratory, those methods should be validated in accordance with internationally accepted scientific protocols or guidelines or, where performance criteria for analytical methods have been established, be based on criteria compliance tests.
Methods of analysis adopted under this Regulation should be edited in the standard layout for methods of analysis recommended by the ISO.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: