Commission Implementing Regulation (EU) 2017/78Show full title

Commission Implementing Regulation (EU) 2017/78 of 15 July 2016 establishing administrative provisions for the EC type-approval of motor vehicles with respect to their 112-based eCall in-vehicle systems and uniform conditions for the implementation of Regulation (EU) 2015/758 of the European Parliament and of the Council with regard to the privacy and data protection of users of such systems (Text with EEA relevance)

PART 1 Information document

MODEL

Information document No … relating to the EC type-approval of a 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component (3).

The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the separate technical unit or component referred to in this information document have electronic controls, information concerning their performance shall be supplied.

0.GENERAL

0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type, if marked on the Separate Technical Unit (1): …
0.3.1.Location of that marking: …
0.4.In case of STU, intended for category of vehicle (2): …
0.5.Company name and address of manufacturer: …
0.7.Location and method of affixing of the EC approval mark: …
0.9.Name and address of the manufacturer's representative (if any): …
12.8.eCall system
12.8.2.Technical description and/or schematic drawings: …
12.8.3.1.Photographs and/or drawings in sufficient detail and to an appropriate scale to enable the STU or component to be identified. The drawings must show the intended position of the STU or component on the vehicle and the space intended for the EC type-approval mark of the STU or component: …
12.8.3.1.1.Instructions for installation in the vehicle, including the position and orientation of the 112-based eCall in-vehicle system component: …
12.8.3.1.2.Location and method of mounting the 112-based eCall in-vehicle STU in the vehicle: …
12.8.3.2.List of the main constituent parts of the STU or component: …
12.8.7.Declaration of conformity with the standards referred to in Article 5(8) of Regulation (EU) 2015/758: yes/no (3).

Explanatory notes

(1)If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(2)As defined in Section A of Annex II to Directive 2007/46/EC.

(3)Delete where not applicable.