- Latest available (Revised)
- Original (As adopted by EU)
Regulation (EU) 2017/821 of the European Parliament and of the Council of 17 May 2017 laying down supply chain due diligence obligations for Union importers of tin, tantalum and tungsten, their ores, and gold originating from conflict-affected and high-risk areas
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.Union importers of minerals shall:
(a)identify and assess the risks of adverse impacts in their mineral supply chain on the basis of the information provided pursuant to Article 4 against the standards of their supply chain policy, consistent with Annex II to, and the due diligence recommendations set out in, the OECD Due Diligence Guidance;
(b)implement a strategy to respond to the identified risks designed so as to prevent or mitigate adverse impacts by:
reporting findings of the supply chain risk assessment to senior management designated for that purpose, in cases where the Union importer is not a natural person;
adopting risk management measures consistent with Annex II to, and the due diligence recommendations set out in, the OECD Due Diligence Guidance, considering their ability to influence, and where necessary take steps to exert pressure on suppliers who can most effectively prevent or mitigate the identified risk, by making it possible either to:
continue trade while simultaneously implementing measurable risk mitigation efforts,
suspend trade temporarily while pursuing ongoing measurable risk mitigation efforts, or
disengage with a supplier after failed attempts at risk mitigation;
implementing the risk management plan; monitoring and tracking performance of risk mitigation efforts; reporting back to senior management designated for this purpose, in cases where the Union importer is not a natural person; and considering suspending or discontinuing engagement with a supplier after failed attempts at mitigation;
undertaking additional fact and risk assessments for risks requiring mitigation, or after a change of circumstances.
2.If a Union importer of minerals pursues risk mitigation efforts while continuing trade or temporarily suspending trade, it shall consult with suppliers and with the stakeholders concerned, including local and central government authorities, international or civil society organisations and affected third parties, and agree on a strategy for measurable risk mitigation in the risk management plan.
3.Union importers of minerals shall, in order to design conflict and high-risk sensitive strategies for mitigation in the risk management plan, rely on the measures and indicators referred to in Annex III to the OECD Due Diligence Guidance and measure progressive improvement.
4.Union importers of metals shall identify and assess, in accordance with Annex II to the OECD Due Diligence Guidance and the specific recommendations set out in that Guidance, the risks in their supply chain based on available third-party audit reports concerning the smelters and refiners in that chain, and, by assessing, as appropriate, the due diligence practices of those smelters and refiners. Those audit reports shall be in accordance with Article 6(1) of this Regulation. In the absence of such third-party audit reports from the smelters and refiners in their supply chain, Union importers of metals shall identify and assess the risks in their supply chain as part of their own risk management system. In such cases, Union importers of metals shall carry out audits of their own supply chain due diligence via an independent third-party in accordance with Article 6 of this Regulation.
5.In cases where they are not natural persons, Union importers of metals shall report the findings of the risk assessment referred to in paragraph 4 to their senior management designated for this purpose and they shall implement a response strategy designed to prevent or mitigate adverse impacts, consistent with Annex II to the OECD Due Diligence Guidance and with the specific recommendations set out in that Guidance.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: