Council Regulation (EU) 2018/120Show full title

CHAPTER I General Provisions

1. Scope

This Annex shall apply to Union fishing vessels of 10 metres' length overall or more carrying on board or deploying trawls, Danish seines or similar gears of mesh size equal to or larger than 32 mm and gillnets of mesh size equal to or larger than 60 mm or bottom longlines in accordance with Regulation (EC) No 2166/2005, and present in ICES divisions 8c and 9a excluding the Gulf of Cádiz.

2. Definitions

For the purposes of this Annex:

(a)

‘gear grouping’ means the grouping consisting of the following two gear categories:

(i)

trawls, Danish seines or similar gears of mesh size equal to or larger than 32 mm, and

(ii)

gillnets of mesh size equal to or larger than 60 mm and bottom longlines;

(b)

‘regulated gear’ means any of the two gear categories belonging to the gear grouping;

(c)

‘area’ means ICES divisions 8c and 9a excluding the Gulf of Cádiz;

(d)

‘current management period’ means the period specified in Article 1(2)(b) of this Regulation;

(e)

‘special conditions’ means the special conditions set out in point 6.1.

3. Limitation in activity

Without prejudice to Article 29 of Regulation (EC) No 1224/2009, each Member State shall ensure that, when carrying on board any regulated gear, Union fishing vessels flying its flag shall be present within the area for no more than the number of days specified in Chapter III of this Annex.