- Latest available (Revised)
- Point in Time (19/12/2018)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2018/2067 of 19 December 2018 on the verification of data and on the accreditation of verifiers pursuant to Directive 2003/87/EC of the European Parliament and of the Council (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 19/12/2018. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the Commission Implementing Regulation (EU) 2018/2067, Article 17.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.The verifier shall check the correct application and implementation of the monitoring methodology as approved by the competent authority in the monitoring plan including specific details of that monitoring methodology.
2.For the purposes of verifying the operator's emission report, the verifier shall check the correct application and implementation of the sampling plan referred to in Article 33 of Implementing Regulation (EU) 2018/2066, as approved by the competent authority.
3.For the purposes of verifying the operator's baseline data report or new entrant data report, the verifier shall check whether the methodology for collecting and monitoring data defined in the monitoring methodology plan is applied in the correct way, including:
(a)whether all data on emissions, inputs, outputs and energy flows are attributed correctly to the sub-installations in line with the system boundaries as referred to in Annex I to Delegated Regulation (EU) …/…;
(b)whether data are complete and whether data gaps or double counting have occurred;
(c)whether activity levels for product benchmarks are based on a correct application of the product definitions listed in Annex I to Delegated Regulation (EU) …/…;
(d)whether activity levels for the heat benchmark sub-installations, the district heating sub-installation, the fuel benchmark sub-installations and the process emissions sub-installations have been correctly attributed according to the products produced and pursuant to delegated acts adopted pursuant to Article 10b(5) of Directive 2003/87/EC.
4.Where transferred CO2 is subtracted in accordance with Article 49 of Implementing Regulation (EU) 2018/2066 or transferred N2O is not counted in accordance with Article 50 of that Regulation and the CO2 or N2O transferred is measured by both the transferring and receiving installation, the verifier shall check whether differences between the measured values at both installations can be explained by the uncertainty of the measurement systems and whether the correct arithmetic average of the measured values has been used in the emission reports of both installations.
Where the differences between the measured values at both installations cannot be explained by the uncertainty of the measurement systems, the verifier shall check whether adjustments were made to align the differences between the measured values, whether those adjustments were conservative and whether the competent authority has granted approval for those adjustments.
5.Where operators are required, pursuant to Article 12(3) of Commission Regulation (EU) No 601/2012, to include further elements in the monitoring plan that are relevant for meeting the requirements of Article 24(1) of Commission Decision 2011/278/EU(1), the verifier shall check the correct application and implementation of the procedures referred to in Article 12(3) of Commission Regulation (EU) No 601/2012. In doing so, the verifier shall also check whether information on any planned or actual changes to the capacity, activity level and operation of an installation have been submitted by the operator to the competent authority by 31 December of the reporting period.
Commission Decision 2011/278/EU of 27 April 2011 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (OJ L 130, 17.5.2011, p. 1).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: