Regulation (EU) 2018/858 of the European Parliament and of the CouncilShow full title

Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (Text with EEA relevance)

LIST OF ANNEXESU.K.

Annex IGeneral definitions, criteria for vehicle categorisation, types of vehicle and types of bodywork
Appendix 1:Procedure for checking whether a vehicle can be categorised as off-road vehicle
Appendix 2:Digits used to supplement the codes to be used for various kinds of bodywork
Annex IIRequirements for the purpose of EU type-approval of vehicles, systems, components or separate technical units
Part IRegulatory acts for EU type-approval of vehicles produced in unlimited series
Appendix 1:Regulatory acts for EU type-approval of vehicles produced in small series pursuant to Article 41
Appendix 2:Requirements for EU individual vehicle approval pursuant to Article 44
Part IIList of UN Regulations recognised as an alternative to the Directives or Regulations referred to in Part I
Part IIIList of regulatory acts setting out the requirements for the purpose of EU type-approval of special purpose vehicles
Appendix 1:Motor-caravans, ambulances and hearses
Appendix 2:Armoured vehicles
Appendix 3:Wheelchair accessible vehicles
Appendix 4:Other special purpose vehicles (including special group, multi-equipment carrier and trailer caravans)
Appendix 5:Mobile cranes
Appendix 6:Exceptional load transport vehicles
Annex IIIProcedures to be followed with respect to EU type-approval
Appendix 1:Standards with which the technical services referred to in Article 68 have to comply
Appendix 2:Procedure for the assessment of the technical services
Annex IVConformity of production procedures
Annex VSmall series and end-of-series limits
Annex VIList of parts or equipment that may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or its environmental performance, their performance requirements of such parts and equipment, the appropriate test procedures and marking and packaging provisions
Annex VIIRegulatory acts for which a manufacturer may be designated as a technical service
Appendix:Designation of an in-house technical service of a manufacturer as technical service and subcontracting
Annex VIIIConditions for the use of virtual testing methods by a manufacturer or a technical service
Appendix 1:General conditions for the use of virtual testing methods
Appendix 2:Specific conditions for the use of virtual testing methods
Appendix 3:Validation process
Annex IXProcedures to be followed during multi-stage type-approval
Appendix:Model of the manufacturer's additional plate
Annex XAccess to vehicle OBD information and vehicle repair and maintenance information
Appendix 1:Manufacturer's certificate on access to vehicle OBD information and vehicle repair and maintenance information
Appendix 2:Vehicle OBD information
Annex XICorrelation table