- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/01/2020.
Regulation (EU) 2018/858 of the European Parliament and of the Council, Division 4. is up to date with all changes known to be in force on or before 03 October 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
at least one front and at least one rear axle designed to be driven simultaneously irrespective of whether one powered axle can be disengaged;
at least one differential locking mechanism or a mechanism having similar effect is fitted;
they are able to climb at least a 25 % gradient as a solo vehicle;
they satisfy five out of the following six requirements:
the approach angle shall be at least 25 degrees;
the departure angle shall be at least 20 degrees;
the ramp angle shall be at least 20 degrees;
the ground clearance under the front axle shall be at least 180 mm;
the ground clearance under the rear axle shall be at least 180 mm;
the ground clearance between the axles shall be at least 200 mm.
all their axles are driven simultaneously, irrespective of whether one or more powered axles can be disengaged;
at least one front and at least one rear axle are designed to be driven simultaneously irrespective of whether one powered axle can be disengaged;
at least one differential locking mechanism or a mechanism having the same effect is fitted;
they are able to climb a 25 % gradient as a solo vehicle;
they satisfy at least five out of the following six requirements if their maximum mass does not exceed 7,5 tonnes and at least four if their maximum mass exceeds 7,5 tonnes:
the approach angle shall be at least 25 degrees;
the departure angle shall be at least 25 degrees;
the ramp angle shall be at least 25 degrees;
the ground clearance under the front axle shall be at least 250 mm;
the ground clearance between axles shall be at least 300 mm;
the ground clearance under the rear axle shall be at least 250 mm.
all their axles are driven simultaneously, irrespective of whether one or more powered axles can be disengaged;
at least half of the axles (or two axles out of the three in the case of a three axle vehicle and three axles in the case of a five axle vehicle) is designed to be driven simultaneously, irrespective of whether one powered axle can be disengaged;
there is at least one differential locking mechanism or a mechanism having similar effect;
they are able to climb a 25 % gradient as solo vehicle;
they satisfy at least four out of the following six requirements:
the approach angle shall be at least 25 degrees;
the departure angle shall be at least 25 degrees;
the ramp angle shall be at least 25 degrees;
the ground clearance under the front axle shall be at least 250 mm;
the ground clearance between axles shall be at least 300 mm;
the ground clearance under the rear axle shall be at least 250 mm.
the transmission of the tractive power to all axles is performed by mechanical means only which provides traction in heavy off-road; or
each of the wheels of the axle in question is driven by an individual hydraulic or electric motor.
If the axles according to the requirements in points 4.1(a), 4.2(a), 4.2(b), 4.3(a), 4.3(b) on simultaneous driven axles are not powered by mechanical means only, the propulsion of the individual wheels shall be designed for heavy off-road operation. In such case it shall be ensured that at least 75 % of total tractive power can be transmitted to the wheel in question when the tractive conditions under the other wheels do not allow to transmit the tractive power properly via these wheels.
The auxiliary drive system according to point 4.5(b) shall not allow to disengage the tractive power automatically until the vehicle reaches 75 % of the maximum vehicle design speed or reaches 65 km/h.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: