- Latest available (Revised)
- Original (As adopted by EU)
Regulation (EU) 2018/858 of the European Parliament and of the CouncilShow full title
Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (Text with EEA relevance)
You are here:
What Version
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Status:
This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version
ANNEX VIII CONDITIONS FOR THE USE OF VIRTUAL TESTING METHODS BY A MANUFACTURER OR A TECHNICAL SERVICE
1.Objectives and scope
This Annex lays down provisions concerning virtual testing in accordance with Article 30(7).
2.List of regulatory acts
| Subject | Regulatory act reference | |
|---|---|---|
| 3B | Rear underrun protective devices (RUPDs) and their installation; rear underrun protection (RUP) | Regulation (EC) No 661/2009 UN Regulation No 58 |
| 6A | Vehicle access and manoeuvrability (steps, running boards and handholds) | Regulation (EC) No 661/2009 Regulation (EU) No 130/2012 |
| 6B | Door latches and door retention components | Regulation (EC) No 661/2009 UN Regulation No 11 |
| 8A | Devices for indirect vision and their installation | Regulation (EC) No 661/2009 UN Regulation No 46 |
| 12A | Interior fittings | Regulation (EC) No 661/2009 UN Regulation No 21 |
| 16A | External projections | Regulation (EC) No 661/2009 UN Regulation No 26 |
| 20A | Installation of lighting and light-signalling devices on vehicles | Regulation (EC) No 661/2009 UN Regulation No 48 |
| 27A | Towing device | Regulation (EC) No 661/2009 Regulation (EU) No 1005/2010 |
| 32A | Forward field of vision | Regulation (EC) No 661/2009 UN Regulation No 125 |
| 35A | Windscreen wiper and washer systems | Regulation (EC) No 661/2009 Regulation (EU) No 1008/2010 |
| 37A | Wheel guards | Regulation (EC) No 661/2009 Regulation (EU) No 1009/2010 |
| 42A | Lateral protection of goods vehicles | Regulation (EC) No 661/2009 UN Regulation No 73 |
| 48A | Masses and dimensions | Regulation (EC) No 661/2009 Regulation (EU) No 1230/2012 |
| 49A | Commercial vehicles with regard to their external projections forward of the cab's rear panel | Regulation (EC) No 661/2009 UN Regulation No 61 |
| 50A | Mechanical coupling components of combinations of vehicles | Regulation (EC) No 661/2009 UN Regulation No 55 |
| 50B | Close-coupling device (CCD); fitting of an approved type of CCD | Regulation (EC) No 661/2009 UN Regulation No 102 |
| 52A | M2 and M3 vehicles | Regulation (EC) No 661/2009 UN Regulation No 107 |
| 52B | Strength of the superstructure of large passenger vehicles | Regulation (EC) No 661/2009 UN Regulation No 66 |
| 57A | Front underrun protective devices (FUPDs) and their installation; front underrun protection (FUP) | Regulation (EC) No 661/2009 UN Regulation No 93 |
Appendix 1General conditions for the use of virtual testing methods
1.Virtual test pattern
The following scheme shall be used as basis structure for describing and conducting virtual testing:
(a)
purpose;
(b)
structure model;
(c)
boundary conditions;
(d)
load assumptions;
(e)
calculation;
(f)
assessment;
(g)
documentation.
2.Fundamentals of computer simulation and calculation
2.1.Mathematical model
The mathematical model shall be supplied by the manufacturer. It shall reflect the complexity of the structure of the vehicle, system, component or separate technical unit to be tested in relation to the requirements of the relevant regulatory act and its boundary conditions.
The same provisions shall apply for testing components or separate technical units independently from the vehicle.
2.2.Validation process of the mathematical model
The mathematical model shall be validated against the actual test conditions.
To that effect a physical test shall be conducted to compare the results obtained when using the mathematical model with the results of a physical test. Comparability of the test results shall be proven. The manufacturer or the technical service shall draft a validation report and submit it to the approval authority.
Any change to the mathematical model or to the software that is likely to invalidate the validation report shall be brought to the attention of the approval authority, which may require that a new validation process is conducted.
The flow chart of the validation process is shown in Appendix 3.
2.3.Documentation
The manufacturer shall make available to the technical service and document the data and auxiliary tools used for simulation and calculation.
3.Tools and support
The manufacturer shall supply the technical service at its request with the necessary tools to conduct the virtual testing, including appropriate software, or provide that technical service access to these tools.
The manufacturer shall also provide appropriate support to the technical service.
The access and support provided by the manufacturer to a technical service does not exempt the technical service from its obligations regarding the skills of its personnel, the payment of licence rights and confidentiality.
Appendix 2Specific conditions for the use of virtual testing methods
1.List of regulatory acts
Appendix 3Validation process
Options/Help
Print Options
PrintThe Whole Regulation
PrintThis Annex only
You have chosen to open the Whole Regulation
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.