ANNEX VIIICONDITIONS FOR THE USE OF VIRTUAL TESTING METHODS BY A MANUFACTURER OR A TECHNICAL SERVICE
1.List of regulatory acts
Regulatory act reference | Annex and paragraphs | Specific conditions | |
|---|---|---|---|
3B | Regulation (EC) No 661/2009 UN Regulation No 58 | Paragraphs 2.3, 7.3. and 25.6 of UN Regulation No 58. | Dimensions and resistance to forces. |
6A | Regulation (EC) No 661/2009 Regulation (EU) No 130/2012 | Annex II, Part 1 and 2 of Regulation (EU) No 130/2012. | Dimensions of steps, running boards and handholds. |
6B | Regulation (EC) No 661/2009 UN Regulation No 11 | Annex 3 of UN Regulation No 11. Annex 4, paragraph 2.1. of UN Regulation No 11. Annex 5 of UN Regulation No 11. | Tensile strength tests and resistance of latches to acceleration. |
8A | Regulation (EC) No 661/2009 UN Regulation No 46 | Paragraph 15.2.4. of UN Regulation No 46. | Prescribed fields of vision of rear-view mirrors. |
12A | Regulation (EC) No 661/2009 UN Regulation No 21 |
|
|
|
| ||
16A | Regulation (EC) No 661/2009 UN Regulation No 26 | Paragraph 5.2.4. of UN Regulation No 26 All provisions in paragraphs 5 (General requirements) and 6 (Particular requirements) of UN Regulation No 26. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
20A | Regulation (EC) No 661/2009 UN Regulation No 48 | Paragraph 6. (Individual specifications), and Annexes 4, 5 and 6 to UN Regulation No 48. | The test drive provided for in paragraph 6.22.9.2.2 shall be performed on a real vehicle. |
27A | Regulation (EC) No 661/2009 Regulation (EU) No 1005/2010 | Annex II, point 1.2. of Regulation (EU) No 1005/2010. | Tractive and compressive static force. |
32A | Regulation (EC) No 661/2009 UN Regulation No 125 | Paragraph 5 (Specifications) of UN Regulation No 125. | Obstructions and field of vision. |
35A | Regulation (EC) No 661/2009 Regulation (EU) No 1008/2010 | Annex III, points 1.1.2. and 1.1.3. of Regulation (EU) No 1008/2010. | Determination of the swept area only. |
37A | Regulation (EC) No 661/2009 Regulation (EU) No 1009/2010 | Annex II, point 2. of Regulation (EU) No 1009/2010. | Verification of the dimensional requirements. |
42A | Regulation (EC) No 661/2009 UN Regulation No 73 | Paragraph 12.10 of UN Regulation No 73. | Resistance under a horizontal force and deflection measurement. |
48A | Regulation (EC) No 661/2009 Regulation (EU) No 1230/2012 |
|
|
|
| ||
49A | Regulation (EC) No 661/2009 UN Regulation No 61 | Paragraphs 5 and 6 of UN Regulation No 61. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
50A | Regulation (EC) No 661/2009 UN Regulation No 55 |
|
|
|
| ||
|
| ||
52A | Regulation (EC) No 661/2009 UN Regulation No 107 | Annex 3 of UN Regulation No 107. | Paragraph 7.4.5. (calculation method). |
52B | Regulation (EC) No 661/2009 UN Regulation No 66 | Annex 9 of UN Regulation No 66. | Computer simulation of rollover test on complete vehicle as an equivalent approval method. |
57A | Regulation (EC) No 661/2009 UN Regulation No 93 | Annex 5, paragraph 3 of UN Regulation No 93. | Resistance under a horizontal force and deflection measurement. |