ANNEX IRules on data to be monitored and reported

PART B: DATA TO BE MONITORED AND REPORTED BY MANUFACTURERS OF HEAVY-DUTY VEHICLES

1.Starting years for the monitoring and reporting of data for the heavy-duty vehicle categories set out in points (a) and (b) of the second paragraph of Article 2:

Category of heavy-duty vehicles

Vehicle group in vehicle category (as referred to in Annex I to Regulation (EU) 2017/2400)

Starting yearMonitoring

Starting yearReporting

N1

N2

1 and 2

2020

2021

N3

3

2020

2021

4, 5, 9 and 10

2019

2020

11, 12 and 16

2020

2021

M1

M2

M3

O3

O4

2.Data to be monitored and reported:

No

Monitoring parameters

Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

Description

1

Vehicle identification number (VIN)

1.1.3

Vehicle and component identification

2

Engine certification number

1.2.2

3

CdxA17 certification number (if applicable)

1.8.3

4

Transmission certification number

1.3.2

F15

Axle certification number

1.7.2

Axle specifications

6

Tyre certification number, axle 1

1.9.2

Vehicle and component identification

7

Tyre certification number, axle 2

1.9.6

8

Tyre certification number, axle 3

1.9.10

9

Tyre certification number, axle 4

1.9.14

10

Vehicle category (N1, N2, N3, M1, M2, M3)

1.1.4

Vehicle classification

11

Axle configuration

1.1.5

12

Maximum gross vehicle weight (t)

1.1.6

13

Vehicle group

1.1.7

14

Name and address of manufacturer

1.1.1

Vehicle and chassis specification

F115

Make (trade name of manufacturer)

Vehicle specifications

16

Corrected actual curb mass (kg)

1.1.8

17

Engine rated power (kW)

1.2.3

Main engine specifications

18

Engine idling speed (1/min)

1.2.4

19

Engine rated speed (1/min)

1.2.5

20

Engine capacity (ltr)

1.2.6

F121

Fuel type (Diesel CI/CNG PI/LNG PI …)

1.2.7

Engine specifications

22

Certification option used for generation of CdxA (standard values/measurement)

1.8.2

Aerodynamics

23

CdxA value (air drag value)

1.8.4

24

Name and address of transmission manufacturer

Main transmission specifications

25

Make (trade name of transmission manufacturer)

26

Certification option used for the generation of simulation tool loss maps (Option 1/Option 2/Option 3/Standard values)

1.3.3

27

Transmission type (SMT18, AMT19, APT20 -S21, APT-P22)

1.3.4

28

Number of gears

1.3.5

29

Transmission ratio final gear

1.3.6

30

Retarder type

1.3.7

31

Power take off (yes/no)

1.3.8

32

Name and address of axle manufacturer

Main axle specifications

33

Make (trade name of axle manufacturer)

34

Certification option used for the generation of a simulation tool loss map (standard values/measurement)

1.7.3

35

Axle type (e.g. standard single driven axle)

1.7.4

36

Axle ratio

1.7.5

37

Certification option used for the generation of a simulation tool loss map (standard values/measurement)

1.6.3

Angle drive specifications

38

Angle drive ratio

1.6.4

39

Name and address of tyre manufacturer

Main tyre specifications

40

Make (trade name of tyre manufacturer)

41

Tyre dimension axle 1

1.9.1

42

Specific rolling resistance coefficient (RRC) of all tyres on axle 1

1.9.3

43

Tyre dimension axle 2

1.9.4

44

Twin axle (yes/no) axle 2

1.9.5

45

Specific RRC of all tyres on axle 2

1.9.7

46

Tyre dimension axle 3

1.9.8

47

Twin axle (yes/no) axle 3

1.9.9

48

Specific RRC of all tyres on axle 3

1.9.11

49

Tyre dimension axle 4

1.9.12

50

Twin axle (yes/no) axle 4

1.9.13

51

Specific RRC of all tyres on axle 4

1.9.15

52

Engine cooling fan technology

1.10.1

Main auxiliary specifications

53

Steering pump technology

1.10.2

54

Electric system technology

1.10.3

55

Pneumatic system technology

1.10.4

56

Mission profile (long haul, long haul (EMS23), regional, regional (EMS), urban, municipal, construction)

2.1.1

Simulation parameters (for each mission profile/load/fuel combination)

57

Load (as defined in the simulation tool) (kg)

2.1.2

58

Fuel type (diesel/petrol/LPG/CNG/…)

2.1.3

59

Total vehicle mass in simulation (kg)

2.1.4

60

Average speed (km/h)

2.2.1

Vehicle driving performance (for each mission profile/load/fuel combination)

61

Minimum instantaneous speed (km/h)

2.2.2

62

Maximum instantaneous speed (km/h)

2.2.3

63

Maximum deceleration (m/s2)

2.2.4

64

Maximum acceleration (m/s2)

2.2.5

65

Full load percentage on driving time

2.2.6

66

Total number of gear shifts

2.2.7

67

Total driven distance (km)

2.2.8

68

CO2 emissions (expressed in g/km, g/t-km, g/p-km, g/m3-km)

2.3.13-2.3.16

CO2 emissions and fuel consumption (for each mission profile/load/fuel combination)

69

Fuel consumption (expressed in g/km, g/t-km, g/p-km, g/m3-km, l/100km, l/t-km, l/p-km, l/m3-km, MJ/km, MJ/t-km, MJ/p-km, MJ/m3-km)

2.3.1-2.3.12

70

Simulation tool version (X.X.X.)

3.1.1

Software and user information

71

Date and time of the simulation

3.1.2

72

Number of licence to operate the simulation tool

F173

Cryptographic hash of the manufacturer's records file

3.1.4

Software information

74

Advanced CO2 reducing technologies

Vehicle CO2 reducing technologies

75

CO2 mass emission of the engine over WHTC24 (g/kWh)

Point 1.4.2 of the addendum to Appendix 5, or point 1.4.2 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable

Engine CO2 emission and specific fuel consumption

76

Fuel consumption of the engine over WHTC (g/kWh)

Point 1.4.2 of the addendum to Appendix 5, or point 1.4.2 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable

77

CO2 mass emission of the engine over WHSC25 (g/kWh)

Point 1.4.1 of the addendum to Appendix 5, or point 1.4.1 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable

78

Fuel consumption of the engine over WHSC (g/kWh)

Point 1.4.1 of the addendum to Appendix 5, or point 1.4.1 of the addendum to Appendix 7, to Annex I to Regulation (EU) No 582/2011, whichever is applicable

F279

Vehicle model

1.1.2

Vehicle specifications

80

Vocational vehicle (yes/no)

1.1.9

81

Zero emission heavy-duty vehicle (yes/no)

1.1.10

82

Hybrid electric heavy-duty vehicle (yes/no)

1.1.11

83

Dual-fuel vehicle (yes/no)

1.1.12

84

Sleeper cab (yes/no)

1.11.13

85

Engine model26

1.2.1

Engine specifications

86

Transmission model26

1.3.1

Transmission specifications

87

Retarder model26

1.4.1

Retarder specifications

88

Retarder certification number

1.4.2

89

Certification option used for generation of a loss map (standard values/measurement)

1.4.3

90

Torque converter model26

1.5.1

Torque converter specifications

91

Torque converter certification number

1.5.2

92

Certification option used for generation of a loss map (standard values/measurement)

1.5.3

93

Angle drive model26

1.6.1

Angle drive specifications

94

Angle drive certification number

1.6.2

95

Axle model26

1.7.1

Axle specifications

96

Air drag model26

1.8.1

Aerodynamics

97

Engine stop-start during vehicle stops (yes/no)

1.12.1

Advanced driver assistance systems (ADAS)

98

Eco-roll without engine stop-start (yes/no)

1.12.2

99

Eco-roll with engine stop-start (yes/no)

1.12.3

100

Predictive cruise control (yes/no)

1.12.4

Air drag.

Synchronised Manual Transmission.

Automated Manual Transmission or Automatic Mechanically-engaged Transmission.

Automatic Powershifting Transmission.

‘Case S’ means the serial arrangement of a torque converter and the connected mechanical parts of the transmission.

‘Case P’ means the parallel arrangement of a torque converter and the connected mechanical parts of the transmission (e.g. in power split installations).

European Modular System (EMS) in accordance with Council Directive 96/53/EC of 25 July 1996 laying down for certain road vehicles circulating within the Community the maximum authorized dimensions in national and international traffic and the maximum authorized weights in international traffic (OJ L 235, 17.9.1996, p. 59).

World Harmonized Transient Driving Cycle.

Worldwide Harmonised Steady state Cycle.

Data entries 85, 86, 87, 90, 93, 95 and 96 shall not be made publicly available in the Central Register on heavy-duty vehicles.