- Latest available (Revised)
- Original (As adopted by EU)
Regulation (EU) 2019/1242 of the European Parliament and of the Council of 20 June 2019 setting CO2 emission performance standards for new heavy-duty vehicles and amending Regulations (EC) No 595/2009 and (EU) 2018/956 of the European Parliament and of the Council and Council Directive 96/53/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Regulation (EU) 2019/1242 of the European Parliament and of the Council. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Each new heavy-duty vehicle shall be attributed to one of the vehicle sub-groups defined in Table 1 in accordance with the conditions set out therein.
Vehicle sub-groups (sg)
Heavy-duty vehicles | Cab type | Engine power | Vehicle sub-group (sg) |
---|---|---|---|
Rigid lorries with axle configuration 4 × 2 and technically permissible maximum laden mass > 16 tonnes | All | < 170 kW | 4-UD |
Day cab | ≥ 170 kW | 4-RD | |
Sleeper cab | ≥ 170 kW and < 265 kW | ||
Sleeper cab | ≥ 265 kW | 4-LH | |
Rigid lorries with axle configuration 6 × 2 | Day cab | All | 9-RD |
Sleeper cab | 9-LH | ||
Tractors with axle configuration 4 × 2 and technically permissible maximum laden mass > 16 tonnes | Day cab | All | 5-RD |
Sleeper cab | < 265 kW | ||
Sleeper cab | ≥ 265 kW | 5-LH | |
Tractors with axle configuration 6 × 2 | Day cab | All | 10-RD |
Sleeper cab | 10-LH |
‘Sleeper cab’ means a type of cab that has a compartment behind the driver’s seat intended to be used for sleeping as reported in accordance with Regulation (EU) 2018/956.
‘Day cab’ means a type of cab that is not a sleeper cab.
If a new heavy-duty vehicle cannot be attributed to a vehicle sub-group because information on the cab type or engine power is not available, it shall be attributed to the long-haul (LH) vehicle sub-group corresponding to its chassis type (rigid lorry or tractor) and axle configuration (4 × 2 or 6 × 2).
Where a new heavy-duty vehicle is attributed to vehicle sub-group 4-UD, but data on the CO2 emissions in g/km are not available for the UDL or UDR mission profiles as defined in Table 2 of point 2.1, the new heavy-duty vehicle shall be attributed to vehicle sub-group 4-RD.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: