1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Obligations of suppliers

  5. Article 4.Obligations of dealers

  6. Article 5.Obligations of internet hosting platforms

  7. Article 6.Measurement methods

  8. Article 7.Verification procedure for market surveillance purposes

  9. Article 8.Review

  10. Article 9.Repeal

  11. Article 10.Entry into force and application

  12. Signature

    1. ANNEX I

      Definitions applicable for the Annexes

      1. The following definitions shall apply:

      2. ‘mains light source’ (MLS) means a light source that can...

    2. ANNEX II

      Energy efficiency classes and calculation method

      1. The energy efficiency class of light sources shall be determined...

      2. ηTM = (Φuse/Pon) × FTM (lm/W).

    3. ANNEX III

      Label for light sources

      1. 1. LABEL

        1. 1.1. Standard-sized label:

        2. 1.2. Small-sized label:

        3. 1.3. The following information shall be included in the label for...

      2. 2. LABEL DESIGNS

        1. 2.1. Standard-sized label:

        2. 2.2. Small-sized label:

        3. 2.3. Whereby:

    4. ANNEX IV

      Exemptions

      1. 1. This Regulation shall not apply to light sources specifically tested...

      2. 2. In addition, this Regulation shall not apply to:

      3. 3. Any light source within the scope of this Delegated Regulation...

    5. ANNEX V

      Product information

      1. 1. Product information sheet

        1. 1.1. Pursuant to point 1(b) of Article 3, the supplier shall...

      2. 2. Information to be displayed in the documentation for a containing...

      3. 3. Information to be displayed on the supplier’s free access website:...

      4. 4. Information for products specified in point 3 of Annex IV...

    6. ANNEX VI

      Technical documentation

      1. 1. The technical documentation referred to in point 1(d) of Article...

    7. ANNEX VII

      Information to be provided in visual advertisements, in technical promotional material and in distance selling, except distance selling on the internet

      1. 1. In visual advertisements, for the purposes of ensuring conformity with...

      2. 2. In technical promotional material, for the purposes of ensuring conformity...

      3. 3. Any paper-based distance selling must show the energy class and...

      4. 4. The energy efficiency class and the range of energy efficiency...

      5. 5. Telemarketing-based distance selling must specifically inform the customer of the...

      6. 6. For all the situations mentioned in points 1 to 3...

    8. ANNEX VIII

      Information to be provided in the case of distance selling on the internet

      1. 1. The appropriate label made available by suppliers in accordance with...

      2. 2. The image used for accessing the label in the case...

      3. 3. In the case of nested display, the sequence of display...

      4. 4. The appropriate product information sheet made available by suppliers in...

    9. ANNEX IX

      Verification procedure for market surveillance purposes

      1. The verification tolerances defined in this Annex relate only to...

      2. When verifying the compliance of a product model with the...

      3. The Member State authorities shall verify one single unit of...

      4. The Member State authorities shall only apply the verification tolerances...

      5. For light sources with linear geometry which are scalable but...

      6. When verifying if a product is a light source, market...

      7. Light sources that allow the end-user to control, manually or...