Commission Delegated Regulation (EU) 2019/2016Show full title

ANNEX VI Technical documentation

1. The technical documentation referred to in point 1(d) of Article 3 shall include the following elements:

(a)

the information as set out in Annex V;

(b)

the information as set out in Table 7. If the refrigerating appliance contains multiple compartments of the same type, the lines for these compartments shall be repeated. If a certain compartment type is not present, the compartment parameters and values shall be ‘-’. If a parameter is not applicable, the values of that parameter shall be ‘-’.

Table 7
Additional information to be included in the technical documentation
a only for products with one or more auto-defrost systems
A general description of the refrigerating model, sufficient for it to be unequivocally and easily identified:
Product specifications:
General product specifications:
Parameter		Value		Parameter		Value
Annual energy consumption (kWh/a)		x		Auxiliary energy (kWh/a)		x
Standard annual energy consumption (kWh/a)		x,xx		EEI (%)		x
Temperature rise time (h)		x,xx		Combi parameter		x,xx
Door heat loss factor		x,xxx		Load factor		x,x
Anti-condensation heater type		[manual on-off/ambient/other/none]
Additional product specifications for refrigerating appliances, except for low noise refrigerating appliances:
Parameter		Value		Parameter		Value
Daily energy consumption at 16 °C (kWh/24h)		x,xxx		Daily energy consumption at 32 °C (kWh/24h)		x,xxx
Incremental defrost and recovery energy consumptiona at 16 °C (Wh)		x,x		incremental defrost and recovery energy consumptiona at 32 °C (Wh)		x,x
Defrost intervala at 16 °C (h)		x,x		Defrost intervala at 32 °C (h)		x,x
Additional product specifications for low noise refrigerating appliances:
Parameter		Value		Parameter		Value
Daily energy consumption at 25 °C (kWh/24h)		x,xxx		Defrost intervala at 25 °C (h)		x,x
Compartment specifications:
Compartment type	Compartment parameters and values
	Target temperature (°C)	Thermodynamic parameter (rc )	Nc	M c	Defrost factor (Ac )	Built-in factor (Bc )
Pantry	x	x,xx	x	x,xx	x,xx	x,xx
Wine storage	x	x,xx	x	x,xx	x,xx	x,xx
Cellar	x	x,xx	x	x,xx	x,xx	x,xx
Fresh food	x	x,xx	x	x,xx	x,xx	x,xx
Chill	x	x,xx	x	x,xx	x,xx	x,xx
0-star or ice making	x	x,xx	x	x,xx	x,xx	x,xx
1-star	x	x,xx	x	x,xx	x,xx	x,xx
2-star	x	x,xx	x	x,xx	x,xx	x,xx
3-star	x	x,xx	x	x,xx	x,xx	x,xx
4-star	x	x,xx	x	x,xx	x,xx	x,xx
2-star section	x	x,xx	x	x,xx	x,xx	x,xx
Variable temperature compartment	x	x,xx	x	x,xx	x,xx	x,xx
Additional information:
The references of the harmonised standards or other reliable accurate and reproducible methods applied:
A list of all equivalent models, including model identifiers:

2. Where the information included in the technical documentation for a particular model has been obtained:

(a)

from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer; or

(b)

by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer; or both.

The technical documentation shall include the details of such calculation, the assessment undertaken by the manufacturer to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different manufacturers.