ANNEX VITechnical documentation
1.The technical documentation referred to in point 1(d) of Article 3 shall include the following elements:
(a)
the information as set out in Annex V;
(b)
the information as set out in Table 11;
Table 11
Additional information to be included in the technical documentation
| a Only for beverage coolers and ice-cream freezers | |||
| A general description of the refrigerating appliance with direct sales function model, sufficient for it to be unequivocally and easily identified: | |||
| Product specifications | |||
| General product specifications: | |||
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Annual energy consumption (kWh/a) | x,xx | Standard annual energy consumption (kWh/a) | x,xx |
| Daily energy consumption (kWh/24h) | x,xxx | Ambient conditions | [Set 1/Set 2] |
| M | x,x | N | x,xxx |
| Temperature coefficient (C) | x,xx | Y | x,xx |
| P | x,xx | ||
| Climate class factor (CC)a | x,xx | Target temperature (Tc) (°C)a | x,x |
| Additional information: | |||
| The references of the harmonised standards or other reliable accurate and reproducible methods applied: | |||
| Where appropriate, identification and signature of the person empowered to bind the supplier: | |||
| A list of equivalent models, including model identifiers: | |||
2.Where the information included in the technical documentation for a particular model has been obtained:
(a)
from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer; or
(b)
by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer, or both,
the technical documentation shall include the details of such calculation, the assessment undertaken by the manufacturer to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different manufacturers.