[F1ANNEX IIIU.K.MONITORING AND REPORTING OF EMISSIONS FROM NEW LIGHT COMMERCIAL VEHICLES

C.Formats for transmission of dataU.K.

For each year, [F2the Secretary of State shall collect] the information specified in points 1 and 3 of Part A in the following format:

Section 1

Aggregated monitoring data

F3...
F3...
Year
Total number of new registrations of new light commercial vehicles subject to [F4F5... UK (NI) type-approval and EU type-approval]
Total number of new registrations of individually approved new light commercial vehicles
Total number of new registrations of new light commercial vehicles subject to F6... national type-approval of small series
Total number of new registrations of new light commercial vehicles subject to multi-stage type-approval (where available)

Section 2

Detailed monitoring data — one vehicle record

[F7Reference (references are to paragraphs in point 1.1 of Part A unless otherwise specified)Detailed data per vehicle registered(1)
(1)

Where, in the case of multi-stage vehicles, data cannot be provided for the base vehicle, the Secretary of State shall as a minimum collect the data specified in this format for the completed vehicle.

(2)

[F8In the case of F9... national type-approval of small series (both to be labelled as NSS), or individual approval (IVA),] the manufacturer’s name shall be provided in the column “Manufacturer name in the United Kingdom registry” whilst in the column “Manufacturer name United Kingdom standard denomination” either of the following shall be indicated: “AA-NSS” or “AA-IVA”, as the case may be.

(3)

In the case of multi-stage vehicles the base (incomplete/complete) vehicle manufacturer shall be indicated. If the base vehicle manufacturer is not available, the manufacturer of the completed vehicle only shall be indicated.

(4)

In the case of multi-stage vehicles, the technically permissible maximum laden mass of the base vehicle shall be indicated.

(5)

Where a vehicle is equipped with axle tracks of different widths, the maximum axle width shall be reported.

(6)

On request from the Secretary of State.

(7)

In the case of multi-stage vehicles, the mass in running order and the technically permissible maximum laden mass of the base vehicle may be replaced by the default added mass specified in the type-approval information in accordance with point 2.17.2 of Annex 1 to Directive 2007/46/EC.]]

(a)Manufacturer name United Kingdom standard denomination(2)
Manufacturer name OEM declaration COMPLETE VEHICLE / BASE VEHICLE(3)
Manufacturer name OEM declaration COMPLETED VEHICLE(3)
Manufacturer name in United Kingdom registry(2)
(b)Type-approval number and its extension
(c)Type
Variant
Version
(d)Make
(e)Category of vehicle type-approved
(f)Category of vehicle registered
(g)Specific emissions of CO2 (combined)
(h)

Mass in running order

BASE VEHICLE

Mass in running order

COMPLETED VEHICLE / COMPLETE VEHICLE

(i)(4)Technically permissible maximum laden mass
(j)Wheel base
Axle width steered axle (Axle 1)(5)
Axle width other axle (Axle 2)(5)
(k)Fuel type
Fuel mode
(l)Engine capacity (cm3)
(m)Electric energy consumption (Wh/km)
(n)Code of the eco-innovation(s)
Total WLTP CO2 emissions savings due to the eco-innovation(s)
(o)Vehicle identification number
(p)WLTP test mass
(q)Vehicle family identification number
(r)Electric range, where available
(s)Date of first registration
(t)Maximum net power
(u)(6)Road load coefficientf0, N
f1, N/(km/h)
f2, N/(km/h)
(v)(6)Frontal area (m2)
(w)(6)Tyre rolling resistance class
F10. . .F10. . .