(1)
Part A is amended as follows:
(a)
point (d) is replaced by the following:
‘(d)for vehicles registered until 31 December 2019 where available, and for vehicles registered from 1 January 2020 in all cases, the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 to Annex II to Directive 2007/46/EC;’
(2)
in Part B, point 2 is amended as follows:
(a)
entry 5 is replaced by the following:
No | Monitoring parameters | Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified | Description |
---|---|---|---|
‘5 | Axle certification number | 1.7.2 | Axle specifications’; |
(b)
entry 15 is replaced by the following:
No | Monitoring parameters | Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified | Description |
---|---|---|---|
‘15 | Make (trade name of manufacturer) | — | Vehicle specifications’; |
(c)
entry 21 is replaced by the following:
No | Monitoring parameters | Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified | Description |
---|---|---|---|
‘21 | Fuel type (Diesel CI/CNG PI/LNG PI …) | 1.2.7 | Engine specifications’; |
(d)
entry 73 is replaced by the following:
No | Monitoring parameters | Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified | Description |
---|---|---|---|
‘73 | Cryptographic hash of the manufacturer's records file | 3.1.4 | Software information’; |
(e)
the following entries 79 to 100 are added:
a Data entries 85, 86, 87, 90, 93, 95 and 96 shall not be made publicly available in the Central Register on heavy-duty vehicles.’ | |||
No | Monitoring parameters | Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified | Description |
---|---|---|---|
‘79 | Vehicle model | 1.1.2 | Vehicle specifications |
80 | Vocational vehicle (yes/no) | 1.1.9 | |
81 | Zero emission heavy-duty vehicle (yes/no) | 1.1.10 | |
82 | Hybrid electric heavy-duty vehicle (yes/no) | 1.1.11 | |
83 | Dual-fuel vehicle (yes/no) | 1.1.12 | |
84 | Sleeper cab (yes/no) | 1.11.13 | |
85 | Engine modela | 1.2.1 | Engine specifications |
86 | Transmission modela | 1.3.1 | Transmission specifications |
87 | Retarder modela | 1.4.1 | Retarder specifications |
88 | Retarder certification number | 1.4.2 | |
89 | Certification option used for generation of a loss map (standard values/measurement) | 1.4.3 | |
90 | Torque converter modela | 1.5.1 | Torque converter specifications |
91 | Torque converter certification number | 1.5.2 | |
92 | Certification option used for generation of a loss map (standard values/measurement) | 1.5.3 | |
93 | Angle drive modela | 1.6.1 | Angle drive specifications |
94 | Angle drive certification number | 1.6.2 | |
95 | Axle modela | 1.7.1 | Axle specifications |
96 | Air drag modela | 1.8.1 | Aerodynamics |
97 | Engine stop-start during vehicle stops (yes/no) | 1.12.1 | Advanced driver assistance systems (ADAS) |
98 | Eco-roll without engine stop-start (yes/no) | 1.12.2 | |
99 | Eco-roll with engine stop-start (yes/no) | 1.12.3 | |
100 | Predictive cruise control (yes/no) | 1.12.4 |