ANNEX

Annex I to Regulation (EU) 2018/956 is amended as follows:

  1. (1)

    Part A is amended as follows:

    1. (a)

      point (d) is replaced by the following:

      (d)

      for vehicles registered until 31 December 2019 where available, and for vehicles registered from 1 January 2020 in all cases, the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 to Annex II to Directive 2007/46/EC;

    2. (b)

      the following point (f) is added:

      (f)

      for vehicles registered from 1 January 2020, the maximum speed of the vehicle as specified in entry 29 of the certificate of conformity.

  2. (2)

    in Part B, point 2 is amended as follows:

    1. (a)

      entry 5 is replaced by the following:

      No

      Monitoring parameters

      Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

      Description

      ‘5

      Axle certification number

      1.7.2

      Axle specifications’;

    2. (b)

      entry 15 is replaced by the following:

      No

      Monitoring parameters

      Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

      Description

      ‘15

      Make (trade name of manufacturer)

      —

      Vehicle specifications’;

    3. (c)

      entry 21 is replaced by the following:

      No

      Monitoring parameters

      Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

      Description

      ‘21

      Fuel type (Diesel CI/CNG PI/LNG PI …)

      1.2.7

      Engine specifications’;

    4. (d)

      entry 73 is replaced by the following:

      No

      Monitoring parameters

      Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

      Description

      ‘73

      Cryptographic hash of the manufacturer's records file

      3.1.4

      Software information’;

    5. (e)

      the following entries 79 to 100 are added:

      No

      Monitoring parameters

      Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

      Description

      ‘79

      Vehicle model

      1.1.2

      Vehicle specifications

      80

      Vocational vehicle (yes/no)

      1.1.9

      81

      Zero emission heavy-duty vehicle (yes/no)

      1.1.10

      82

      Hybrid electric heavy-duty vehicle (yes/no)

      1.1.11

      83

      Dual-fuel vehicle (yes/no)

      1.1.12

      84

      Sleeper cab (yes/no)

      1.11.13

      85

      Engine model3

      1.2.1

      Engine specifications

      86

      Transmission model3

      1.3.1

      Transmission specifications

      87

      Retarder model3

      1.4.1

      Retarder specifications

      88

      Retarder certification number

      1.4.2

      89

      Certification option used for generation of a loss map (standard values/measurement)

      1.4.3

      90

      Torque converter model3

      1.5.1

      Torque converter specifications

      91

      Torque converter certification number

      1.5.2

      92

      Certification option used for generation of a loss map (standard values/measurement)

      1.5.3

      93

      Angle drive model3

      1.6.1

      Angle drive specifications

      94

      Angle drive certification number

      1.6.2

      95

      Axle model3

      1.7.1

      Axle specifications

      96

      Air drag model3

      1.8.1

      Aerodynamics

      97

      Engine stop-start during vehicle stops (yes/no)

      1.12.1

      Advanced driver assistance systems (ADAS)

      98

      Eco-roll without engine stop-start (yes/no)

      1.12.2

      99

      Eco-roll with engine stop-start (yes/no)

      1.12.3

      100

      Predictive cruise control (yes/no)

      1.12.4

      Data entries 85, 86, 87, 90, 93, 95 and 96 shall not be made publicly available in the Central Register on heavy-duty vehicles.’