ANNEX U.K.

Annex I to Regulation (EU) 2018/956 is amended as follows:

(1)

Part A is amended as follows:

(a)

the following points (g) to (n) are added:

‘(g)

for vehicles registereduntil 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the stage of completion, as indicated in the chosen model of the certificate of conformity in accordance with point 2 of Annex IX to Directive 2007/46/EC;

(h)

the vehicle category as specified in entry 0.4 of the certificate of conformity;

(i)

for vehicles registered until 31 December 2020 where available and for vehicles registered from 1 January 2021 in all cases, the number of axles, as specified in entry 1 of the certificate of conformity;

(j)

the technically permissible maximum laden mass, as specified in entry 16.1 of the certificate of conformity;

(k)

for vehicles registered until 31 December 2021 where available and for vehicles registered from 1 January 2022 in all cases, the imprint of the cryptographic hash of the manufacturer’s records file as specified in entry 49.1 of the certificate of conformity; for vehicles registered until 30 June 2025 Member States may report only the first 8 characters of the cryptographic hash;

(l)

for vehicles registered until 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the specific CO₂ emissions as specified in entry 49.5 of the certificate of conformity;

(m)

for vehicles registered until 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the average payload value as specified in entry 49.6 of the certificate of conformity;

(n)

the date of registration.’;

(2)

in Part B, point 2 is amended as follows for vehicles reported as from 2021 onwards:

(a)

entries 24 and 25 are replaced by the following:

No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
‘24	Name and address of transmission manufacturer	Point 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400	Main transmission specifications’
25	Make (trade name of transmission manufacturer)	Point 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400

(b)

entries 32 and 33 are replaced by the following:

No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
‘32	Name and address of axle manufacturer	Point 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400	Main axle specifications’
33	Make (trade name of axle manufacturer)	Point 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400

(c)

entries 39 and 40 are replaced by the following:

No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
‘39	Name and address of tyre manufacturer	Point 1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400	Main tyre specifications’
40	Make (trade name of tyre manufacturer)	Point 3 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400

(d)

the following entry 101 is added:

No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
‘101	For vehicles with a date of simulation as of 1 July 2020, the type-approval number of the engine	Point 1.2.1. of addendum to Appendix 5, 6 or 7 to Annex I to Regulation (EU) No 582/2011, whichever is applicable	Engine specifications’