- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2020/639 of 12 May 2020 amending Implementing Regulation (EU) 2019/947 as regards standard scenarios for operations executed in or beyond the visual line of sight (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
The UAS operator shall provide the competent authority with an operational risk assessment for the intended operation in accordance with Article 11, or submit a declaration when point UAS.SPEC.020 is applicable, unless the operator holds a light UAS operator certificate (LUC) with the appropriate privileges, in accordance with Part C of this Annex. The UAS operator shall regularly evaluate the adequacy of the mitigation measures taken and update them where necessary.
In accordance with Article 5, the UAS operator may submit an operational declaration of compliance with a standard scenario as defined in Appendix 1 to this Annex to the competent authority of the Member State of registration as an alternative to points UAS.SPEC.30 and UAS.SPEC.40 in relation to operations:
of unmanned aircraft with:
maximum characteristic dimension up to 3 metres in VLOS over controlled ground area except over assemblies of people,
maximum characteristic dimension up to 1 metre in VLOS except over assemblies of people;
maximum characteristic dimension up to 1 metre in BVLOS over sparsely populated areas;
maximum characteristic dimension up to 3 metres in BVLOS over controlled ground area.
performed below 120 metres from the closest point of the surface of the earth, and:
in uncontrolled airspace (class F or G) unless different limitations are provided by Member States through UAS geographical zones in areas where the probability of encountering manned aircraft is not low; or
in controlled airspace, in accordance with published procedures for the area of operation, so that a low probability of encountering manned aircraft is ensured.
A declaration of UAS operators shall contain:
administrative information about the UAS operator;
a statement that the operation satisfies the operational requirement set out in point (1) and a standard scenario as defined in Appendix 1 to the Annex;
the commitment of the UAS operator to comply with the relevant mitigation measures required for the safety of the operation, including the associated instructions for the operation, for the design of the unmanned aircraft and the competency of involved personnel.
confirmation by the UAS operator that an appropriate insurance cover will be in place for every flight made under the declaration, if required by Union or national law.
Upon receipt of the declaration, the competent authority shall verify that the declaration contains all the elements listed in point (2) and shall provide the UAS operator with a confirmation of receipt and completeness without undue delay.
After receiving the confirmation of receipt and completeness, the UAS operator is entitled to start the operation.
UAS operators shall notify, without any delay, the competent authority of any change to the information contained in the operational declaration that they submitted.
UAS operators holding an LUC with appropriate privileges, in accordance with Part C of this Annex, are not required to submit the declaration.
Before starting an UAS operation in the ‘specific’ category the UAS operator shall obtain an operational authorisation from the national competent authority of the Member State of registration, except:
when point UAS.SPEC.020 is applicable; or
the UAS operator holds an LUC with the appropriate privileges, in accordance with Part C of this Annex.
The UAS operator shall submit an application for an updated operational authorisation if there are any significant changes to the operation or to the mitigation measures listed in the operational authorisation.
The application for an operational authorisation shall be based on the risk assessment referred to in Article 11 and shall include in addition the following information:
the registration number of the UAS operator;
the name of the accountable manager or the name of the UAS operator in the case of a natural person;
the operational risk assessment;
the list of mitigation measures proposed by the UAS operator, with sufficient information for the competent authority to assess the adequacy of the mitigation means to address the risks;
an operations manual when required by the risk and complexity of the operation;
a confirmation that an appropriate insurance cover will be in place at the start of the UAS operations, if required by Union or national law.
When receiving an application in accordance with point UAS.SPEC.030, the competent authority shall issue, without undue delay, an operational authorisation in accordance with Article 12 when it concludes that the operation meets the following conditions:
all information in accordance with point (3) of point UAS.SPEC.030 is provided;
a procedure is in place for coordination with the relevant service provider for the airspace if the entire operation, or part of it, is to be conducted in controlled airspace.
The competent authority shall specify in the operational authorisation the exact scope of the authorisation in accordance with Article 12.
The UAS operator shall comply with all of the following:
establish procedures and limitations adapted to the type of the intended operation and the risk involved, including:
operational procedures to ensure the safety of the operations;
procedures to ensure that security requirements applicable to the area of operations are complied with in the intended operation;
measures to protect against unlawful interference and unauthorised access;
procedures to ensure that all operations are in respect of Regulation (EU) 2016/679 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data. In particular it shall carry out a data protection impact assessment, when required by the National Authority for data protection in application of Article 35 of Regulation (EU) 2016/679;
guidelines for its remote pilots to plan UAS operations in a manner that minimises nuisances, including noise and other emissions-related nuisances, to people and animals.
designate a remote pilot for each flight or, in the case of autonomous operations, ensure that during all phases of the flight, responsibilities and tasks especially those defined in points (2) and (3) of point UAS.SPEC.060 are properly allocated in accordance with the procedures established pursuant to point (a);
ensure that all operations effectively use and support the efficient use of radio spectrum in order to avoid harmful interference;
ensure that before conducting operations, remote pilots comply with all of the following conditions:
have the competency to perform their tasks in line with the applicable training identified by the operational authorisation or, if point UAS.SPEC.020 applies, by the conditions and limitations defined in the appropriate standard scenario listed in Appendix 1 or as defined by the LUC;
follow remote pilot training which shall be competency based and include the competencies set out in paragraph 2 of Article 8:
follow remote pilot training, as defined in the operational authorisation, for operations requiring such authorisation, it shall be conducted in cooperation with an entity designated by the competent authority;
follow remote pilot training for operations under declaration that shall be conducted in accordance with the mitigation measures defined by the standard scenario;
have been informed about the UAS operator’s operations manual, if required by the risk assessment and procedures established in accordance with point (a);
obtain updated information relevant to the intended operation about any geographical zones defined in accordance with Article 15;
ensure that personnel in charge of duties essential to the UAS operation, other than the remote pilot itself, comply with all of the following conditions:
have completed the on-the-job-training developed by the operator;
have been informed about the UAS operator’s operations manual, if required by the risk assessment, and about the procedures established in accordance with point (a);
have obtained updated information relevant to the intended operation about any geographical zones defined in accordance with Article 15;
carry out each operation within the limitations, conditions, and mitigation measures defined in the declaration or specified in the operational authorisation;
keep and maintain an up-to-date record of:
all the relevant qualifications and training courses completed by the remote pilot and the other personnel in charge of duties essential to the UAS operation and by the maintenance staff, for at least 3 years after those persons have ceased employment with the organisation or have changed their position in the organisation;
the maintenance activities conducted on the UAS for a minimum of 3 years;
the information on UAS operations, including any unusual technical or operational occurrences and other data as required by the declaration or by the operational authorisation for a minimum of 3 years;
use UAS which, as a minimum, are designed in such a manner that a possible failure will not lead the UAS to fly outside the operation volume or to cause a fatality. In addition, Man Machine interfaces shall be such to minimise the risk of pilot error and shall not cause unreasonable fatigue;
maintain the UAS in a suitable condition for safe operation by:
as a minimum, defining maintenance instructions and employing an adequately trained and qualified maintenance staff; and
complying with point UAS.SPEC.100, if required;
using an unmanned aircraft which is designed to minimise noise and other emissions, taking into account the type of the intended operations and geographical areas where the aircraft noise and other emissions are of concern.
establish and keep an up-to-date list of the designated remote pilots for each flight;
establish and keep an up-to-date list of the maintenance staff employed by the operator to carry out maintenance activities; and
ensure that each individual unmanned aircraft is installed with:
at least one green flashing light for the purpose of visibility of the unmanned aircraft at night, and
an active and up-to-date remote identification system.
The remote pilot shall:
not perform duties under the influence of psychoactive substances or alcohol or when it is unfit to perform its tasks due to injury, fatigue, medication, sickness or other causes;
have the appropriate remote pilot competency as defined in the operational authorisation, in the standard scenario defined in Appendix 1 or as defined by the LUC and carry a proof of competency while operating the UAS.
be familiar with manufacturer’s instructions provided by the manufacturer of the UAS.
Before starting an UAS operation, the remote pilot shall comply with all of the following:
obtain updated information relevant to the intended operation about any geographical zones defined in accordance with Article 15;
ensure that the operating environment is compatible with the authorised or declared limitations and conditions;
ensure that the UAS is in a safe condition to complete the intended flight safely, and if applicable, check if the direct remote identification is active and up-to-date;
ensure that the information about the operation has been made available to the relevant air traffic service (ATS) unit, other airspace users and relevant stakeholders, as required by the operational authorisation or by the conditions published by the Member State for the geographical zone of operation in accordance with Article 15.
During the flight, the remote pilot shall:
comply with the authorised or declared limitations and conditions;
avoid any risk of collision with any manned aircraft and discontinue a flight when continuing it may pose a risk to other aircraft, people, animals, environment or property;
comply with the operational limitations in geographical zones defined in accordance with Article 15;
comply with the operator’s procedures;
not fly close to or inside areas where an emergency response effort is ongoing unless they have permission to do so from the responsible emergency response services.
An operational authorisation is not transferable.
The operational declaration shall have a limited duration of 2 years. The declaration shall no longer be considered as complete within the meaning of point (4) of point UAS.SPEC.020 if:
during the oversight of the UAS operator, the competent authority has found that the UAS operation is not conducted in accordance with the operational declaration;
the conditions of the UAS operation have changed to the extent that the operational declaration no longer complies with the applicable requirements of this Regulation;
the competent authority is not granted access in accordance with point UAS.SPEC.090.
For the purpose of demonstrating compliance with this Regulation, an UAS operator shall grant to any person, that is duly authorised by the competent authority, an access to any facility, UAS, document, records, data, procedures or to any other material relevant to its activity, which is subject to operational authorisation or operational declaration, regardless of whether or not its activity is contracted or subcontracted to another organisation.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: