- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2020/683Show full title
Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles
You are here:
- Regulations originating from the EU
- 2020 No. 683
- Table of contents
What Version
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes to legislation:
There are outstanding changes not yet made to Commission Implementing Regulation (EU) 2020/683. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.
Changes and effects yet to be applied to :
- Annex 5 point 4(b) words substituted by S.I. 2024/146 reg. 3
Article 2.Templates for GB type-approval certificates, including GB type-approval certificates for vehicles produced in medium series...
Article 3.Templates for national type-approval certificates for vehicles produced in medium series and national individual vehicle approval certificates
Article 5.Model for the GB type-approval mark for components and separate technical units
Article 8.Templates and other requirements for certificates of conformity
(1) Only for the approval under Regulation (EC) No 715/2007 of...
(2) If the means of identification of type contains characters not...
(3) Classified according to the definitions set out in Part A...
(4) Delete where not applicable (there are cases where nothing needs...
(5) In the case of axles fitted with wheels in dual(twin)...
(6) Designation according to EN 10027-1: 2016. If that is not...
(7) ‘Forward control’ means a configuration in which more than half...
(8) According to section 1 of the Automated and Electric Vehicles...
(10) Standard ISO 612:1978 – Road vehicles – Dimensions of motor...
(11) Optional equipment that affects the dimensions of the vehicle shall...
(12) In accordance with definitions 25 (Wheelbase) and 26 (Axle spacing)...
(14) Commission Regulation (EU) No 1230/2012 of 12 December 2012 implementing...
(29) Commission Regulation (EU) No 1230/2012 of 12 December 2012 implementing...
(31) Commission Regulation (EU) No 1230/2012 of 12 December 2012 implementing...
(32) For trailers or semi-trailers, and for vehicles coupled with a...
(34) ‘Coupling overhang’ is the horizontal distance between the coupling for...
(35) Only for the purpose of definition of off-road vehicles.
(36) Regulation (EC) No 715/2007 of the European Parliament and of...
(37) Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing...
(39) This figure shall be rounded off to the nearest tenth...
(40) This value shall be calculated (π = 3,1416) and rounded...
(43) Determined in accordance with the requirements of Regulation (EC) No...
(44) Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing...
(45) Vehicles can be fuelled with both petrol and a gaseous...
(46) To be documented if not documented in the documentation referred...
(48) To be documented if not already included in the documentation...
(50) UN Regulation No 49 of the Economic Commission for Europe...
(51) Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation...
(52) UN Regulation No 83 of the Economic Commission for Europe...
(53) UN Regulation No 67 of the Economic Commission for Europe...
(54) UN Regulation No 110 of the Economic Commission for Europe...
(55) Regulation (EC) No 79/2009 of the European Parliament and of...
(56) Determined in accordance with the requirements of Regulation (EC) 715/2007...
(59) Value for the combined WHTC including cold and hot part...
(60) Regulation (EU) 2019/631 of the European Parliament and of the...
(61) Regulation (EU) No 510/2011 of the European Parliament and of...
(62) Commission Implementing Regulation (EU) No 725/2011 of 25 July 2011...
(63) Commission Implementing Regulation (EU) No 427/2014 of 25 April 2014...
(64) Expand the table if necessary, using one extra row per...
(67) Under agreement of the type-approval authority, if a modelling methodology...
(68) Sum of the CO2 emissions savings of each individual eco-innovation....
(69) Representative vehicle is tested for the road load matrix family....
(70) Commission Regulation (EU) No 136/2014 of 11 February 2014 amending...
(71) Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation...
(73) UN Regulation No 85 of the Economic Commission for Europe...
(76) The specified particulars are to be given for any proposed...
(77) With respect to trailers, maximum speed permitted by the manufacturer....
(78) UN Regulation No 39 of the Economic Commission for Europe...
(79) Commission Regulation (EU) No 65/2012 of 24 January 2012 implementing...
(81) UN Regulation No 21 of the Economic Commission for Europe...
(82) UN Regulation No 121 of the Economic Commission for Europe...
(83) The number of seating positions to be mentioned shall be...
(84) ‘R-point’ or ‘seating reference point’ means a design point defined...
(85) UN Regulation No 26 of the Economic Commission for Europe...
(86) The table may be extended as necessary for vehicles with...
(87) UN Regulation No 14 of the Economic Commission for Europe...
(88) For symbols and marks to be used, see paragraph 5.3.4...
(89) Commission Regulation (EU) No 1009/2010 of 9 November 2010 concerning...
(90) Commission Regulation (EU) No 19/2011 of 11 January 2011 concerning...
(91) Commission Regulation (EU) No 109/2011 of 27 January 2011 implementing...
(92) UN Regulation No 48 of the Economic Commission for Europe...
(93) UN Regulation No 10 of the Economic Commission for Europe...
(94) UN Regulation No 138 of the Economic Commission for Europe...
(95) Regulation (EU) No 540/2014 of the European Parliament and of...
(96) UN Regulation No 66 of the Economic Commission for Europe...
(97) UN Regulation No 105 of the Economic Commission for Europe...
(98) These terms are defined in the standard ISO 22628:2002 –...
(99) Regulation (EC) No 715/2007 of the European Parliament and of...
(100) Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing...
(102) To be indicated where the manufacturer applies Article 28(6) of...
(104) To be indicated where not obtainable from the number of...
(105) If not available at the time of granting the type-approval,...
(107) In accordance with Annex II to Regulation (EU) 2018/858.
(108) Or visual representation of an ‘advanced electronic signature’ in accordance...
(111) This entry shall be completed only where the vehicle has...
(112) In the case of more than one electric motor indicate...
(114) Indicate only the basic colour(s): white, yellow, orange, red, violet,...
(115) Excluding seats designated for use only when the vehicle is...
(116) Add the number of the Euro level and, if appropriate,...
(117) Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation...
(121) Only applicable if the vehicle is approved in accordance with...
(122) Commission Regulation (EU) No 1008/2010 of 9 November 2010 concerning...
(123) Commission Regulation (EU) No 19/2011 of 11 January 2011 concerning...
(124) Commission Regulation (EU) No 249/2012 of 21 March 2012 amending...
(125) UN Regulation No 13-H of the Economic Commission for Europe...
(126) UN Regulation No 46 of the Economic Commission for Europe...
(127) Regulation No 28 of the Economic Commission for Europe of...
(128) When restrictions for the fuel are applicable, indicate those restrictions...
(129) Vehicles can be fuelled with both petrol and a gaseous...
(130) For bi fuel vehicles, the table shall be repeated for...
(136) The unit ‘l/100km’ is replaced by ‘m3/100km’ for vehicles fuelled...
(137) The format for the Interpolation Family Identifier is provided in...
(138) Commission Implementing Regulation (EU) 2017/1152 of 2 June 2017 setting...
(139) Commission Implementing Regulation (EU) 2017/1153 of 2 June 2017 setting...
(140) The format for the Interpolation Family Identifier is provided in...
(141) Repeat the table for each variant/version of the vehicle.
(142) Expand the table if necessary, using one extra row per...
(143) UN Regulation No 83 of the Economic Commission for Europe...
(144) Document approving the eco-innovation. Article 12 of Regulation (EU) 2019/631...
(145) As assigned in the document approving the eco-innovation.
(146) If a modelling methodology is applied instead of the type...
(147) = point 3.5.1.3 of Annex I to this Regulation, implementing...
(148) Sum of the results from each individual eco-innovation CO2 emissions...
(149) Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation...
(150) Sum of the results from each individual eco-innovation CO2 emissions...
(151) The general code of the eco-innovation(s) shall consist of the...
(152) ISO/IEC 17025:2017 General requirements for the competence of testing and...
(154) Indicate whether the vehicle is suitable for use in either...
(155) The speedometer must be capable of showing both imperial and...
(156) This statement shall not restrict the right of the Secretary...
(157) Entries 4 and 4.1 shall be completed in accordance with...
(160) Optional equipment and additional tyre/wheel combinations under this letter can...
(161) Only applicable to individual vehicles from roadload matrix family (RLMF)....
(162) Repeat for the various fuels that can be used. Vehicles...
(163) In case of EURO VI dual-fuel engines and vehicles, repeat...
(164) Solely emissions assessed in accordance with the applicable regulatory act...
(165) If the vehicle is equipped with 24 GHz short-range radar...
(166) The manufacturer may complete these entries either for international traffic...
(167) Excluding seats designated for use only when the vehicle is...
(168) In the case of completed vehicles of category N1 within...
(169) Only applicable if the vehicle is approved in accordance with...
(170) Only applicable if the vehicle is approved in accordance with...
(171) As indicated in point 2.3 of the customer information file...
(172) As indicated in point 2.4 of the customer information file...
(173) UN Regulation No 105 of the Economic Commission for Europe...
(174) For the term coupling point ‘0’ see Regulation (EU) No...
TEMPLATE FOR AN INFORMATION DOCUMENT FOR THE GB TYPE-APPROVAL OF...
0.2.2. For multi-stage approved vehicles, type-approval information of the base/previous stage...
0.2.2.1. Allowed Parameter Values for multistage type approval to use the...
0.2.3.4.3. Roadload families applicable in the interpolation family: …
0.3. Means of identification of type, if marked on the vehicle/component/separate...
0.4.1. Classification(s) according to the dangerous goods which the vehicle is...
0.5.1. For multi-stage approved vehicles, company name and address of the...
0.6. Location and method of attachment of statutory plates and location...
0.9. Name and address of the manufacturer’s representative (if any): …...
1. GENERAL CONSTRUCTION CHARACTERISTICS
1.2. Dimensional drawing of the whole vehicle (shortest and longest wheelbase...
1.4. Chassis (if any) (overall drawing – shortest and longest wheelbase...
1.7. Driving cab: forward control (7)/bonneted/sleeper cab (4): …
1.8.1. Vehicle is equipped to be driven in right/left (4) hand...
1.9. Specify if the towing vehicle is intended to tow semi-trailers...
1.10. Specify if the vehicle is specially designed for the controlled-temperature...
1.11. Vehicle is designed to be capable, in at least some...
2. MASSES AND DIMENSIONS (9) (10) (11)
2.2.1.1. Distance between the axis of the fifth wheel kingpin and...
2.2.1.2. Maximum distance between the axis of the fifth wheel kingpin...
2.2.1.3. Semi-trailer special wheelbase (as defined in point 3.2 of Part...
2.2.2.1. Fifth wheel lead (maximum and minimum; indicate the permissible values...
2.2.2.2. Maximum height of the fifth wheel (standardised) (16): …
2.4. Range of vehicle dimensions (overall)
2.4.1.1.3. In the case of trailers, maximum permissible drawbar length (19):...
2.4.1.3. Height (in running order) (21) (for suspensions adjustable for height,...
2.4.1.5.2. Minimum and maximum permissible overhang of the coupling point (27):...
2.4.1.6. Ground clearance (as defined in point 4.5 of Part A...
2.4.1.8. Extreme permissible positions of the centre of gravity of the...
2.4.2.1.2. In the case of trailers, maximum permissible drawbar length (28):...
2.4.2.1.3. Elongated cab complying with Appendix 5 of Annex I to...
2.4.2.2.1. Thickness of the walls (in the case of vehicles designed...
2.4.2.3. Height (in running order) (21) (for suspensions adjustable for height,...
2.4.2.5.2. Minimum and maximum permissible overhang of the coupling point (27):...
2.4.2.6. Ground clearance (as defined in point 4.1 and 4.2 of...
2.4.2.8. Extreme permissible positions of the centre of gravity of the...
2.4.2.9. Position of centre of gravity of the vehicle (M2 and...
2.4.3. For bodywork approved without chassis (vehicles M2 and M3)
2.4.3.3. Nominal height (in running order) (21) on intended chassis type(s)...
2.5. Minimum mass on the steering axle(s) for incomplete vehicles: …...
2.6. Mass in running order (30)
2.6.1. Distribution of this mass among the axles and, in the...
2.6.2. Maximum mass of the optional equipment (see the definition set...
2.6.2.1. Distribution of this mass among the axles and, in the...
2.6.5. List of equipment to for alternative propulsion (and indication of...
2.7. Minimum mass of the completed vehicle as stated by the...
2.7.1. Distribution of this mass among the axles and, in the...
2.7.2. Maximum permissible actual mass as stated by the manufacturer, in...
2.8. Technically permissible maximum laden mass stated by the manufacturer (32)...
2.8.1. Distribution of this mass among the axles and, in the...
2.10. Technically permissible mass on each group of axles: …
2.11. Technically permissible maximum towable mass of the towing vehicle
2.11.3.1. Maximum ratio of the coupling overhang (34) to the wheel...
2.11.5. Technically permissible maximum laden mass of the combination (33): …...
2.12. Technically permissible maximum mass at the coupling point:
2.12.2. Of a semi-trailer, a centre-axle trailer or a rigid drawbar...
2.12.3. Maximum permissible mass of the coupling device (if not fitted...
2.14.1. Engine power/technically permissible maximum laden mass of the combination ratio...
2.16. Registration/in service maximum permissible masses, vehicle categories M2, M3, N2,...
2.16.1. Registration/in service maximum permissible laden mass: …
2.16.2. Registration/in service maximum permissible mass on each axle and, in...
2.16.3. Registration/in service maximum permissible mass on each group of axles:...
2.16.5. Registration/in service maximum permissible mass of the combination: …
2.17. Vehicle submitted to multi-stage type-approval (only in the case of...
2.17.2. Default added mass, calculated in accordance with Section 5 of...
3. PROPULSION ENERGY CONVERTER (38)
3.1.1. Manufacturer’s code (as marked on the propulsion energy converter or...
3.1.2. Number of the approval certificate (where appropriate), including fuel identification...
3.2.1.1. Working principle: positive ignition/compression ignition/dual- fuel (4)
3.2.1.1.1. Type of dual-fuel engine: Type 1A/Type 1B/Type 2A/Type 2B/Type 3B...
3.2.1.1.2. Gas energy ratio over the hot part of the WHTC...
3.2.1.5. Drawings of combustion chamber, piston crown and, in the case...
3.2.1.7. Carbon monoxide content by volume in the exhaust gas with...
3.2.1.8. Maximum net power (43): … kW at … min–1 (manufacturer’s...
3.2.1.9. Maximum permitted engine speed as prescribed by the manufacturer: …...
3.2.1.10. Maximum net torque (43): … Nm at … min-1 (manufacturer’s...
3.2.2.1. Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/Biodiesel/Hydrogen (4) (45)
3.2.2.2.1. (Euro VI only) Fuels compatible with use by the engine...
3.2.2.4. Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel, Dual...
3.2.2.5. Maximum amount of biofuel acceptable in fuel (manufacturer’s declared value):...
3.2.3.1.2. Drawing and technical description of the tank(s) with all connections...
3.2.3.1.3. Drawing clearly showing the position of the tank(s) in the...
3.2.3.2.2. Drawing and technical description of the tank(s) with all connections...
3.2.3.2.3. Drawing clearly showing the position of the tank(s) in the...
3.2.4.2. By fuel injection (compression ignition or dual-fuel only): yes/no (4)...
3.2.4.2.1. System description (common rail/unit injectors/distribution pump etc.): …
3.2.4.2.2. Working principle: direct injection/pre-chamber/swirl chamber (4)
3.2.4.2.3.3. Maximum fuel delivery (4) (41): … mm3/stroke or cycle at...
3.2.4.2.4.2.1. Speed at which cut-off starts under load: …… min-1
3.2.4.2.6.3. Opening pressure (41): … kPa or characteristic diagram (41): …...
3.2.4.2.9.3.1.1. Software identification number of the ECU: …
3.2.4.3. By fuel injection (positive ignition only): yes/no (4)
3.2.4.3.4. System description (In the case of systems other than continuous...
3.2.4.3.4.3. Make and type or working principle of air-flow sensor: …...
3.2.4.4.1. Pressure (41): … kPa or characteristic diagram(41): …
3.2.7.1. Nominal setting of the engine temperature control mechanism: …
3.2.7.2.5. Description of the fan and its drive mechanism: …
3.2.8.1.3. Description of the system (e.g. maximum charge pressure: …… kPa;...
3.2.8.3. Intake depression at rated engine speed and at 100 %...
3.2.8.3.3. (Euro VI only) Actual Intake system depression at rated engine...
3.2.8.4. Description and drawings of inlet pipes and their accessories (plenum...
3.2.8.4.1. Intake manifold description (include drawings and/or photos): …
3.2.9.2.1. (Euro VI only) Description and/or drawing of the elements of...
3.2.9.3. Maximum allowable exhaust back pressure at rated engine speed and...
3.2.9.3.1. (Euro VI only) Actual exhaust backpressure at rated engine speed...
3.2.9.6.1. Description of the location and type of fibrous materials used:...
3.2.9.7.1. (Euro VI only) Acceptable exhaust system volume: … dm3
3.2.9.7.2. (EURO VI only) Volume of the exhaust system that is...
3.2.10. Minimum cross-sectional areas of inlet and outlet ports: …
3.2.11.1. Maximum lift of valves, angles of opening and closing, or...
3.2.12.1. Device for recycling crankcase gases (description and drawings): …
3.2.12.1.1. (Euro VI only) Device for recycling crankcase gases: yes/no (41)...
3.2.12.2. Pollution control devices (if not covered by another heading)
3.2.12.2.1.1. Number of catalytic converters and elements (provide the information below...
3.2.12.2.1.2. Dimensions, shape and volume of the catalytic converter(s): …
3.2.12.2.1.3. Type of catalytic action: … (oxidising, three-way, lean NOx trap,...
3.2.12.2.1.8. Type of casing for the catalytic converter(s): …
3.2.12.2.1.9. Location of the catalytic converter(s) (place and reference distance in...
3.2.12.2.4.2. Water-cooled system (to be specified for each EGR system e.g....
3.2.12.2.5. Evaporative emissions control system (petrol and ethanol engines only): yes/no...
3.2.12.2.5.5. Schematic drawing of the fuel tank (petrol and ethanol engines...
3.2.12.2.5.5.1. Fuel tank system capacity, material and construction: …
3.2.12.2.5.5.2. Description of vapour hose material, fuel line material and connection...
3.2.12.2.5.5.4. Description of fuel tank relief valve setting (air ingestion and...
3.2.12.2.5.6. Description and schematic of the heat shield between tank and...
3.2.12.2.6.1. Dimensions, shape and capacity of the particulate trap: …
3.2.12.2.6.3. Location (reference distance in the exhaust line): …
3.2.12.2.6.7. Normal operating temperature: … (K) and pressure range … (KPa)...
3.2.12.2.6.8. In the case of periodic regeneration (heavy-duty vehicles only)
3.2.12.2.6.8.1. Number of ETC test cycles between 2 regenerations (n1): …...
3.2.12.2.6.8.1.1. (Euro VI only) Number of WHTC test cycles without regeneration...
3.2.12.2.6.8.2. Number of ETC cycles during regeneration (n2): …(not applicable to...
3.2.12.2.6.8.2.1. (Euro VI only) Number of WHTC test cycles with regeneration...
3.2.12.2.7.0.1. (Euro VI only) Number of OBD engine families within the...
3.2.12.2.7.0.2. (Euro VI only) List of the OBD engine families (when...
3.2.12.2.7.0.3. (Euro VI only) Number of the OBD engine family the...
3.2.12.2.7.0.4. (Euro VI only) Manufacturer references of the OBD-Documentation required by...
3.2.12.2.7.0.5. (Euro VI only) When appropriate, manufacturer reference of the Documentation...
3.2.12.2.7.0.6. (Euro VI only) When appropriate, manufacturer reference of the documentation...
3.2.12.2.7.0.7. Written description and/or drawing of the MI (46): …
3.2.12.2.7.0.8. Written description and/or drawing of the OBD off-board communication interface...
3.2.12.2.7.1. Written description and/or drawing of the MI: …
3.2.12.2.7.2. List and purpose of all components monitored by the OBD...
3.2.12.2.7.3. Written description (general working principles) for
3.2.12.2.7.3.1.5. Other components monitored by the OBD system: …
3.2.12.2.7.3.2.5 Other components monitored by the OBD system: …
3.2.12.2.7.4. Criteria for MI activation (fixed number of driving cycles or...
3.2.12.2.7.5. List of all OBD output codes and formats used (with...
3.2.12.2.7.6. The following additional information shall be provided by the vehicle...
3.2.12.2.7.6.1. A description of the type and number of the preconditioning...
3.2.12.2.7.6.2. A description of the type of the OBD demonstration cycle...
3.2.12.2.7.6.3. A comprehensive document describing all sensed components with the strategy...
3.2.12.2.7.6.4. The information required above may be defined by completing a...
3.2.12.2.7.6.5. (Euro VI only) OBD Communication protocol standard (47):
3.2.12.2.7.7. (Euro VI only) Manufacturer reference of the OBD related information...
3.2.12.2.7.7.1. As an alternative to the manufacturer reference provided in point...
3.2.12.2.7.8. (EURO VI only) OBD components on-board the vehicle
3.2.12.2.7.8.0. Alternative approval as provided for in point 2.4.1 of Annex...
3.2.12.2.7.8.2. Written description and/or drawing of the MI (48)
3.2.12.2.7.8.3. Written description and/or drawing of the OBD off-board communication interface...
3.2.12.2.8.1. (Euro VI only) Systems to ensure the correct operation of...
3.2.12.2.8.2.1. (Euro VI only) Engine with permanent deactivation of the driver...
3.2.12.2.8.2.3. Type of inducement system: no engine restart after countdown/no start...
3.2.12.2.8.2.5. Equivalent to the average driving range of the vehicle with...
3.2.12.2.8.3. (Euro VI only) Number of OBD engine families within the...
3.2.12.2.8.3.1. (Euro VI only) List of the OBD engine families within...
3.2.12.2.8.3.2. (Euro VI only) Number of the OBD engine family the...
3.2.12.2.8.4. (Euro VI only) List of the OBD engine families (when...
3.2.12.2.8.5. (Euro VI only) Number of the OBD engine family the...
3.2.12.2.8.6. (Euro VI only) lowest concentration of the active ingredient present...
3.2.12.2.8.7. (Euro VI only) When appropriate, manufacturer reference of the Documentation...
3.2.12.2.8.8. (EURO VI only) Components on-board the vehicle of the systems...
3.2.12.2.8.8.1. List of components on-board the vehicle of the systems ensuring...
3.2.12.2.8.8.2. When appropriate, manufacturer reference of the documentation package related to...
3.2.12.2.8.8.3. Written description and/or drawing of the warning signal (48)
3.2.12.2.8.8.4. Alternative approval provided for in point 2.1 of Annex XIII...
3.2.12.2.8.8.5. Heated/non-heated reagent tank and dosing system (see paragraph 2.4 of...
3.2.12.2.9.1. Description of the torque limiter activation (heavy-duty vehicles only): …...
3.2.12.2.9.2. Description of the full load curve limitation (heavy-duty vehicles only):...
3.2.12.2.10. Periodically regenerating system: (provide the information below for each separate...
3.2.12.2.10.1. Method or system of regeneration, description and/or drawing: ….
3.2.12.2.10.2. The number of Type 1 operating cycles, or equivalent engine...
3.2.12.2.10.2.1. Applicable Type 1 cycle (indicate the applicable procedure: Regulation (EU)...
3.2.12.2.10.3. Description of method employed to determine the number of cycles...
3.2.12.2.10.4. Parameters to determine the level of loading required before regeneration...
3.2.12.2.10.5. Description of method used to load system in the test...
3.2.12.2.11. Catalytic converter systems using consumable reagents (provide the information below...
3.2.12.2.11.2. Normal operational temperature range of reagent: …
3.2.12.2.11.4. Frequency of reagent refill: continuous/maintenance (where appropriate):
3.2.12.2.11.5. Reagent indicator (description and location): …
3.2.13.1. Location of the absorption coefficient symbol (compression ignition engines only):...
3.2.13.2. Power at six points of measurement (see Appendix 2 of...
3.2.13.3. Engine power measured on test bench/on the vehicle
3.2.14. Details of any devices designed to influence fuel economy (if...
3.2.15.1. The number of the type-approval certificate issued in accordance with...
3.2.15.2. Electronic engine management control unit for LPG fuelling
3.2.15.3.1. Description of the safeguarding of the catalyst at switch-over from...
3.2.16.1. The number of the type-approval certificate issued in accordance with...
3.2.16.2. Electronic engine management control unit for NG fuelling
3.2.16.3.1. Description of the safeguarding of the catalyst at switch-over from...
3.2.17. Specific information related to gas and dual-fuel engines for heavy-duty...
3.2.17.2. Pressure regulator(s) or vaporiser/pressure regulator(s) (4)
3.2.17.2.4. Pressure in final stage minimum: ….. kPa – maximum: …....
3.2.17.3. Fuelling system: mixing unit/gas injection/liquid injection/direct injection (4)
3.2.17.3.2. System description and/or diagram and drawings: …
3.2.17.5.2. Injection: continuous/simultaneously timed/sequentially timed (4)
3.2.17.6.2.3. Opening pressure or characteristic diagram (41): …
3.2.17.8.1. Variant 1 (only in the case of approvals of engines...
3.2.17.8.1.0.1. (Euro VI only) Self-adaptive feature? yes/no (4)
3.2.17.8.1.0.2. (Euro VI only) Calibration for a specific gas composition NG-H/NG-L/NG-HL/LNG...
3.2.17.8.2. Variant 2 (only in the case of approvals for several...
3.2.17.9. When appropriate, manufacturer reference of the documentation for installing the...
3.2.18.1. The number of the GB type-approval certificate issued in accordance...
3.2.18.2. Electronic engine management control unit for hydrogen fuelling
3.2.18.3.1. Description of the safeguarding of the catalyst at switch-over from...
3.2.19.1. Percentage of hydrogen in the fuel (the maximum specified by...
3.2.19.2. Number of the GB type-approval certificate issued in accordance with...
3.2.19.3. Electronic engine management control unit for H2NG fuelling
3.2.20.2.5. Worst case approach vehicle cool down: yes/no (4)
3.2.20.2.5.1. (Not worst-case approach) Minimum soaking time, tsoak_ATCT (hours): …
3.2.20.2.5.2. (Not worst-case approach) Location of the engine temperature measurement: …...
3.2.20.2.6. Single interpolation family within the ATCT family approach: yes/no (4)...
3.4. Combinations of propulsion energy converters
3.4.2. Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging (4):...
3.4.4. Description of the energy storage device: (REESS, capacitor, flywheel/generator)
3.4.4.5. Energy: … (for REESS: voltage and capacity Ah in 2...
3.4.5. Electric machine (describe each type of electric machine separately)
3.4.5.3.1. When used as traction motor: single-/multimotors (number) (4): …
3.4.5.5.5.1. Direct current/alternating current/number of phases: …
3.5.1.2. CO2 mass emissions (extra-urban conditions): … g/km
3.5.2. Fuel consumption (provide details for each reference fuel tested)
3.5.2.1. Fuel consumption (urban conditions)… l/100km or m3/100km or kg/100km (4)...
3.5.2.2. Fuel consumption (extra-urban conditions)… l/100km or m3/100km or kg/100km (4)...
3.5.2.3. Fuel consumption (combined) … l/100km or m3/100km or kg/100km (4)...
3.5.3.1. Electric energy consumption for pure electric vehicles … Wh/km
3.5.3.2. Electric energy consumption for externally chargeable hybrid electric vehicles
3.5.3.2.1. Electric energy consumption (Condition A, combined) … Wh/km
3.5.3.2.2. Electric energy consumption (Condition B, combined) … Wh/km
3.5.3.2.3. Electric energy consumption (weighted combined) … Wh/km
3.5.4.2. CO2 mass emissions WHSC test in diesel mode (58): …...
3.5.4.3. CO2 mass emissions WHSC test in dual-fuel mode(42) … g/kWh...
3.5.4.5. CO2 mass emissions WHTC test in diesel mode (58) (59):...
3.5.4.6. CO2 mass emissions WHTC test in dual-fuel mode (42) (59):...
3.5.5. Fuel consumption for heavy duty engines (Euro VI only)
3.5.5.2. Fuel consumption WHSC test in diesel mode (58): … g/kWh...
3.5.5.3. Fuel consumption WHSC test in in dual-fuel mode (42): …...
3.5.5.5. Fuel consumption WHTC test in diesel mode (58) (59): …...
3.5.5.6. Fuel consumption WHTC test in dual-fuel mode (42) (59): …...
3.5.6. Vehicle fitted with an eco-innovation within the meaning of Article...
3.5.6.1. Type/Variant/Version of the baseline vehicle as referred to in Article...
3.5.6.2. Existence of interactions between different eco-innovations: yes/no (4)
3.5.6.3. Emissions data related to the use of eco-innovations (repeat the...
3.5.7.1.1. Fuel used for the Type 1 test and selected for...
3.5.7.2.1. CO2 mass emission for pure ICE vehicles and NOVC-HEVs
3.5.7.2.1.0. Minimum and maximum CO2 values within the interpolation family
3.5.7.2.2.1. Charge Sustaining CO2 mass emission vehicle high: g/km
3.5.7.2.2.1.0. Combined CO2 mass emission vehicle high (NEDC Condition B): g/km...
3.5.7.2.2.2. Charge Sustaining CO2 mass emission vehicle low (if applicable): g/km...
3.5.7.2.2.2.0. Combined CO2 mass emission vehicle low (if applicable) (NEDC Condition...
3.5.7.2.2.3. Charge Sustaining CO2 mass emission vehicle M (if applicable): g/km...
3.5.7.2.2.3.0. Combined CO2 mass emission vehicle M (if applicable) (NEDC Condition...
3.5.7.2.3. Charge Depleting CO2 mass emission and weighted CO2 mass emission...
3.5.7.2.3.1. Charge Depleting CO2 mass emission of Vehicle high: … g/km...
3.5.7.2.3.1.0. Charge Depleting CO2 mass emission of Vehicle high (NEDC Condition...
3.5.7.2.3.2. Charge Depleting CO2 mass emission of Vehicle low (if applicable):...
3.5.7.2.3.2.0. Charge Depleting CO2 mass emission of Vehicle low (if applicable)...
3.5.7.2.3.3. Charge Depleting CO2 mass emission of Vehicle M (if applicable):...
3.5.7.2.3.3.0. Charge Depleting CO2 mass emission of Vehicle M (if applicable)...
3.5.7.2.3.4. Minimum and maximum weighted CO2 values within the OVC interpolation...
3.5.7.4. Charge Sustaining fuel consumption (FCCS) for FCHVs
3.5.7.5. Electric energy consumption for electrified vehicles
3.5.7.5.1. Combined electric energy consumption (ECWLTC) for Pure electric vehicles
3.5.7.5.2. Utility factor weighted charge-depleting electric consumption ECAC,CD (combined)
3.5.8. Vehicle fitted with an eco-innovation within the meaning of Article...
3.5.8.1. Type/Variant/Version of the baseline vehicle as referred to in Article...
3.5.8.2. Existence of interactions between different eco-innovations: yes/no (4)
3.5.8.3. Emissions data related to the use of eco-innovations (repeat the...
3.5.9. CO2 emissions and fuel consumption certification (for heavy-duty vehicles, as...
3.5.9.2. Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
3.9.1. Hydrogen system designed to use liquid hydrogen/Hydrogen system designed to...
3.9.1.2. Name and address of the manufacturer(s) of the hydrogen system...
3.9.1.3. Manufacturer’s system code(s) (as marked on the system, or other...
3.9.1.4.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.4.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.4.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.5.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.5.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.5.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.6.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.7.3. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.7.4. Number of filling cycles or duty cycles as appropriate: …...
3.9.1.8.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.8.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.8.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.9.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.9.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.9.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.10.3. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.10.4. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.11.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.11.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.11.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.12.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.12.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.12.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.13. Pressure and/or temperature and/or hydrogen and/or flow sensor(s) (4): yes/no...
3.9.1.13.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.13.4. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.13.6. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.14.4. Description of principle of adjustment through main adjustment points: …...
3.9.1.14.6. Description of principles of adjustment through idle adjustment points: …...
3.9.1.14.7. Other adjustment possibilities: if so and which (description and drawings):...
3.9.1.14.8. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.14.9. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.14.11. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.15.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.15.8. Normal maximum operating temperature (4) (41): … °C
3.9.1.15.10. Number of filling cycles (Class 0 components only) (4): …...
3.9.1.16.3. Nominal working pressure(s) and if downstream of the first pressure...
3.9.1.16.5. Number of filling cycles or duty cycles as appropriate (4):...
3.9.1.17.3. Maximum Allowable Working Pressure (MAWP) (4) (41): … MPa
3.9.1.17.6. Number of filling cycles (Class 0 components only) (4): …...
3.9.1.18.3. Nominal working pressure(s) and maximum allowable working pressure(s) (41): …...
3.9.2.1. Process diagram (flow chart) of the hydrogen system
3.9.2.2. System layout including electrical connections and other external system (inputs...
3.9.2.4. Adjustment data of pressure relief devices and pressure regulators
3.9.2.5. Layout of cooling/heating system(s) including Nominal or Maximum Allowable Working...
3.9.2.6. Drawings showing requirements for installation and operation.
4.2.1. A brief description of the electrical/electronic components (if any): …...
4.8.1. Method of operation and description of drive mechanism: …
4.8.3. Tolerance of the measuring mechanism (pursuant to paragraph 2.2.3 of...
4.8.4. Overall transmission ratio (pursuant to paragraph 2.2.2 of UN Regulation...
4.8.5. Diagram of the speedometer scale or other forms of display:...
4.8.6. The technical constant of odometer (pursuant to paragraph 2.2.4 of...
6.2.2. A brief description of the electrical/electronic components (if any): …...
6.2.3.1. Suspension of driving axle(s) equivalent to air-suspension: yes/no (4)
6.2.3.2. Frequency and damping of the oscillation of the sprung mass:...
6.2.4.1. Suspension of non-driving axle(s) equivalent to air-suspension: yes/no (4)
6.2.4.2. Frequency and damping of the oscillation of the sprung mass:...
6.3. Characteristics of the springing parts of the suspension (design, characteristics...
7.1. Schematic diagram of steered axle(s) showing steering geometry: …
7.2.1. Type of steering transmission (specify for front and rear, if...
7.2.2. Linkage to wheels (including other than mechanical means; specify for...
7.2.2.1. A brief description of the electrical/electronic components (if any): …...
7.2.3.1. Method and diagram of operation, make(s) and type(s): …
7.2.4. Diagram of the steering equipment as a whole, showing the...
7.2.6. Range and method of adjustment (if any), of the steering...
8.1. Type and characteristics of the brakes including details and drawings...
8.2. Operating diagram, description and/or drawing of the braking system including...
8.2.6.1.3. Axle the braking system is fitted to: Axle 1/Axle 2/Axle...
8.3. Control and transmission of trailer braking systems in vehicles designed...
8.4. Vehicle is equipped to tow a trailer with electric/pneumatic/hydraulic (4)...
8.5.3. For vehicles with anti-lock systems, description of system operation (including...
8.6. Calculation and curves according to Annex 10 to UN Regulation...
8.7. Description and/or drawing of the energy supply, also to be...
8.7.1. In the case of compressed-air braking systems, working pressure p2...
8.7.2. In the case of vacuum braking systems, the initial energy...
8.8. Calculation of the braking system: Determination of the ratio between...
8.9. Brief description of the braking system according to paragraph 12...
8.10. If claiming exemptions from the Type I and/or Type II...
8.11. Particulars of the type(s) of endurance braking system(s): …
9.3. Occupant doors, latches and hinges
9.3.1.1. Dimensions, direction and maximum angle of opening: …
9.3.2. Drawing of latches and hinges and of their position in...
9.3.4. Details, including dimensions, of entrances, steps and necessary handles where...
9.3.5. Electrical/electronic components of the door system: …
9.3.5.1. Brief description of any electrical/electronic components: …
9.3.5.2. Description of electrical/electronic functionality in the door system: …
9.9. Devices for indirect vision
9.9.1.4. Drawing(s) for the identification of the mirror showing the position...
9.9.1.5. Details of the method of attachment including that part of...
9.9.1.6. Optional equipment which may affect the rearward field of vision:...
9.9.1.7. A brief description of the electronic components (if any): …...
9.9.2.1.1. In the case of a camera-monitor device, the detection distance...
9.9.2.1.2. Sufficiently detailed drawings to identify the complete device, including installation...
9.10.1.1. Layout drawing or photographs showing the position of the attached...
9.10.1.2. Photograph or drawing showing the reference zone including the exempted...
9.10.1.3. Photographs, drawings and/or an exploded view of the interior fittings,...
9.10.2. Arrangement and identification of controls, tell-tales and indicators
9.10.2.1. Photographs and/or drawings of the arrangement of symbols and controls,...
9.10.2.2. Photographs and/or drawings of the identification of controls, tell-tales and...
9.10.3.2. Seat(s) designated for use only when the vehicle is stationary:...
9.10.3.4. Characteristics: for seats not type-approved as components, description and drawings...
9.10.3.4.4. The seat-belt anchorages (if incorporated in the seat structure): …...
9.10.3.8. Detailed description of the electrical/electronic components (if any) of the...
9.10.3.9. Description of the luggage compartment space if the seat back(s)...
9.10.3.10. Vehicle equipped with a partitioning system: yes/no/optional (4)
9.10.3.10.1. Detailed description of the partitioning system including the mounting to...
9.10.4.1. Type(s) of head restraints: integrated/detachable/separate (4)
9.10.4.2. Number(s) of the type-approval certificate (s), if available: …
9.10.4.3.1. A detailed description of the head restraint, specifying in particular...
9.10.4.3.2.1. A detailed description of the structural zone to which the...
9.10.4.3.2.2. Dimensional drawings of the characteristic parts of the structure and...
9.10.4.4. Detailed description of the electrical/electronic components (if any) of the...
9.10.5.1. A brief description of the vehicle type with regard to...
9.10.5.2. A detailed description of the vehicle type with regard to...
9.10.5.2.1. Layout drawing of the heating system showing its position in...
9.10.5.2.2. Layout drawing of the heat exchanger for heating systems using...
9.10.5.2.3. Sectional drawing of the heat exchanger or the parts respectively...
9.10.5.2.4. Specifications shall be given for further important components of the...
9.10.5.3. A brief description of the vehicle type with regard to...
9.10.5.3.1. Layout drawing of the combustion heater, the air inlet system,...
9.10.6. Components with regard to the protection of the occupants of...
9.10.6.1. A detailed description, including photograph(s) and/or drawing(s), of the vehicle...
9.10.6.2. Photograph(s) and/or drawing(s) of vehicle components other than those described...
9.10.6.3. Other components located in the energy absorption zone of the...
9.10.6.3.2. Description of high voltage BUS and high voltage components located...
9.10.6.3.3. Description of hydrogen system/components located in the energy absorption zone...
9.10.7. Burning behaviour of materials used in the interior construction of...
9.10.7.1. Material(s) used for the interior lining of the roof
9.10.7.1.1. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.1.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.2.1. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.2.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.3.1. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.3.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.4.1. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.4.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.5. Material(s) used for the heating and ventilation pipes
9.10.7.5.1. Numbers of the component type-approval certificate (s), if available: …...
9.10.7.5.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.6.1. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.6.2.2. Composite/single (4) material, number of layers (4): …
9.10.7.7.2. Number(s) of the component type-approval certificate (s), if available: …...
9.10.7.7.3.2. Composite/single (4) material, number of layers (4): …
9.10.7.8. Components approved as complete devices (seats, separation walls, luggage racks,...
9.10.7.8.1. Number(s) of the component type-approval certificate (s): …
9.10.7.8.2. For the complete device: seat, separation wall, luggage racks, etc....
9.10.8. Gas used as refrigerant in the air-conditioning system: …
9.10.8.1. The air-conditioning system is designed to contain fluorinated greenhouse gases...
9.10.8.2.1. Drawing and brief description of the air-conditioning system, including the...
9.10.8.2.4. Reference or part number and material of the components of...
9.12. Safety belts and/or other restraint systems
9.12.1. Number and position of safety belts and restraint systems and...
9.12.2. Nature and position of supplementary restraint systems (indicate yes/no/optional)
9.12.3. Number and position of safety belt anchorages and proof of...
9.12.4. A brief description of the electrical/electronic components (if any): …...
9.14. Space for mounting rear registration plates (give range where appropriate,...
9.17.1. Photographs and/or drawings of the locations of the statutory plates...
9.17.2. Photographs and/or drawings of the statutory plate and inscriptions (completed...
9.17.3. Photographs and/or drawings of the vehicle identification number (completed example...
9.17.4. Manufacturer’s declaration of compliance with Part B of Annex I...
9.17.4.1. The meaning of characters in the vehicle descriptor section (VDS)...
9.17.4.2. If characters in the vehicle descriptor second section are used...
9.18. Radio interference/electromagnetic compatibility
9.18.1. Description and drawings/photographs of the shapes and constituent materials of...
9.18.2. Drawings or photographs of the position of metal components housed...
9.18.3. Table and drawing of radio-interference control equipment: …
9.18.4. Particulars of the nominal value of the direct current resistance,...
9.24. Frontal protection systems
9.24.1. General arrangement (drawings or photographs) indicating the position and attachment...
9.24.2. Drawings and/or photographs, where relevant, of air intake grilles, radiator...
9.24.3. Complete details of fittings required and full instructions, including torque...
9.24.5. Drawing of the floor line at the vehicle front end:...
9.26. Aerodynamic device or equipment on the front of the vehicle...
9.27. Aerodynamic device or equipment on the rear of the vehicle...
10. LIGHTING AND LIGHT SIGNALLING DEVICES
10.1. Table of all devices: number, make, model, type-approval mark, maximum...
10.2. Drawing of the position of lighting and light signalling devices:...
10.3. For every lamp and reflector specified in UN Regulation No...
10.3.1. Drawing showing the extent of the illuminating surface: …
10.3.2. Method used for the definition of the apparent surface in...
10.4. Dipped beam lamps: normal orientation in accordance to paragraph 6.2.6.1...
10.5. A brief description of electrical/electronic components other than lamps (if...
11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS
12.1.1. Location, method of affixing, placement and orientation of the device(s),...
12.2.1.1. A detailed description of the vehicle type with regard to...
12.2.1.2. Drawings of the protective device and of its mounting on...
12.2.1.5.1. Number of the type-approval certificate, if available: …
12.2.1.5.2.1. A detailed technical description of the vehicle immobiliser and of...
12.2.1.5.2.2. The system(s) on which the vehicle immobiliser acts: …
12.2.1.5.2.3. Number of effective interchangeable codes, if applicable: …
12.2.2.1. Number of the type-approval certificate, if available: …
12.2.2.2.1. A detailed description of the alarm system and of the...
12.2.2.2.2. A list of the main components comprising the alarm system:...
12.2.3. A brief description of the electrical/electronic components (if any): …...
12.3.3. Drawing or photograph of the chassis/area of the vehicle body...
12.4. Details of any non-engine related devices designed to influence fuel...
12.5. Details of any non-engine related devices designed to reduce noise...
12.6.3. Number(s) of the type-approval certificate (s), if available: …
12.6.4. Speed or range of speeds at which the speed limitation...
12.7. Table of installation and use of RF transmitters in the...
12.7.1. Vehicle equipped with a 24 GHz short-range radar equipment: yes/no...
12.8.2. Technical description and drawings of the device or type-approval certificate...
12.9.1. The number of the approval certificate issued on the basis...
12.9.2. Complete reference to the test results of AVAS sound emission...
12.10. Devices or systems with driver selectable modes which influence CO2...
12.10.1. Charge sustaining test (if applicable) (state for each device or...
12.10.2. Charge depleting test (if applicable) (state for each device or...
12.10.3. Type 1 test (if applicable) (state for each device or...
13. SPECIAL PROVISIONS FOR BUSES AND COACHES
13.1. Class of vehicle: Class I/Class II/Class III/Class A/Class B (4)...
13.1.1. Number of the type-approval certificate of bodywork approved as a...
13.1.2. Chassis types where the type-approved bodywork can be installed (manufacturer(s),...
13.4. Number of passengers seated
13.6. Number of emergency exits (doors, windows, escape hatches, intercommunication staircase...
13.9. Technical devices facilitating the access to vehicles (e.g. ramp, lifting...
13.10.1. Number of the type-approval certificate, if available: …
13.10.2.1. Detailed description of the superstructure of the vehicle type including...
13.10.2.2. Drawings of the vehicle and those parts of its interior...
13.10.2.3. Position of centre of gravity of the vehicle in running...
13.10.2.4. Maximum distance between the centre lines of the outboard passenger...
13.11. Points of UN Regulation No 66 (96) of the Economic...
13.12. Drawing with dimensions showing the interior arrangement as regards the...
14. SPECIAL PROVISIONS FOR VEHICLES INTENDED FOR THE TRANSPORT OF DANGEROUS...
14.1. Electrical equipment according to UN Regulation No 105 (97) of...
15. REUSABILITY, RECYCLABILITY AND RECOVERABILITY
15.2. Mass of the reference vehicle with bodywork or mass of...
15.3.1. Mass of material taken into account at the pre-treatment step...
15.3.2. Mass of the material taken into account at the dismantling...
15.3.3. Mass of material taken into account at the non-metallic residue...
15.3.4. Mass of material taken into account at the non-metallic residue...
15.3.6. Total mass of materials, which are reusable and/or recyclable: …...
15.3.7. Total mass of materials, which are reusable and/or recoverable: …...
TEMPLATE FOR AN INFORMATION DOCUMENT FOR THE PURPOSES OF GB WHOLE-VEHICLE STEP-BY-STEP TYPE-APPROVAL
The information documents referred to in Regulation (EU) 2018/858 in...
Make sure that drawings or pictures show sufficient details distinctly...
0.2.2. For multi-stage approved vehicles, type-approval information of the base/previous stage...
0.2.2.1. Allowed Parameter Values for multistage type approval to use the...
0.2.3.4.3. Roadload families applicable in the interpolation family: …
0.3. Means of identification of type, if marked on the vehicle...
0.4.1. Classification(s) according to the dangerous goods which the vehicle is...
0.5.1. For multi-stage approved vehicles, company name and address of the...
0.9. Name and address of the manufacturer’s representative (if any): …...
1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1. Photographs and/or drawings of a representative vehicle: …
1.4. Chassis (if any) (overall drawing – shortest and longest wheelbase):...
1.8.1. Vehicle is equipped to be driven in right/left (4) hand...
1.9. Specify if the towing vehicle is intended to tow semi-trailers...
1.10. Specify if the vehicle is specially designed for the controlled-temperature...
1.11. Specify if the vehicle is non-automated/automated/fully automated (4) (8)
2. MASSES AND DIMENSIONS (9) (10) (11)
2.1.2.1. Axle spacing between consecutive axles going from the foremost to...
2.4.1.3. Height (in running order) (21) (for suspensions adjustable for height,...
2.4.2.1.3. Elongated cab complying with Article 9a of Directive 96/53/EC: yes/no...
2.4.2.2.1. Thickness of the walls (in the case of vehicles designed...
2.4.2.3. Height (in running order) (21) (for suspensions adjustable for height,...
2.5. Minimum mass on the steering axle(s) for incomplete vehicles: …...
2.6.1. Distribution of this mass among the axles and, in the...
2.6.2. Mass of the optional equipment (as defined in point (5)...
2.6.5. List of equipment to for alternative propulsion (and indication of...
2.7. Minimum mass of the completed vehicle as stated by the...
2.8. Technically permissible maximum laden mass stated by the manufacturer (32)...
2.8.1. Distribution of this mass among the axles and, in the...
2.10. Technically permissible mass on each group of axles: …
2.11. Technically permissible maximum towable mass of the towing vehicle
2.11.5. Technically permissible maximum laden mass of the combination (33): …...
2.12. Technically permissible maximum mass at the coupling point:
2.12.2. of a semi-trailer, a centre-axle trailer or a rigid drawbar...
2.16. Registration/in service maximum permissible masses, vehicle categories M2, M3, N2,...
2.16.1. Registration/in service maximum permissible laden mass: …
2.16.2. Registration/in service maximum permissible mass on each axle and, in...
2.16.3. Registration/in service maximum permissible mass on each group of axles:...
2.16.4. Registration/in service maximum permissible towable mass: …
2.16.5. Registration/in service maximum permissible mass of the combination: …
2.17. Vehicle submitted to multi-stage type-approval (only in the case of...
2.17.2. Default added mass, calculated in accordance with Section 5 of...
3. PROPULSION ENERGY CONVERTER (38)
3.1.1. Manufacturer’s code (as marked on the propulsion energy converter or...
3.1.2. Number of the approval certificate (where appropriate), including fuel identification...
3.2.1.1. Working principle: positive ignition/compression ignition/dual- fuel(
3.2.1.1.1. Type of dual-fuel engine: Type 1A/Type 1B/Type 2A/Type 2B/Type 3B...
3.2.1.1.2. Gas Energy Ratio over the hot part of the WHTC...
3.2.1.8. Maximum net power (43): … kW at … min–1 (manufacturer’s...
3.2.1.11. (Euro VI only) Manufacturer references of the Documentation package required...
3.2.2.1. Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/Biodiesel/Hydrogen (4) (45)
3.2.2.2.1. (Euro VI only) Fuels compatible with use by the engine...
3.2.2.4. Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel, Dual...
3.2.2.5. Maximum amount of biofuel acceptable in fuel (manufacturer’s declared value):...
3.2.4.2. By fuel injection (compression ignition or dual-fuel only): yes/no (4)...
3.2.4.2.2. Working principle: direct injection/pre-chamber/swirl chamber (4)
3.2.4.3. By fuel injection (positive ignition only): yes/no (4)
3.2.8.3.3. (Euro VI only) Actual Intake system depression at rated engine...
3.2.9.2.1. (Euro VI only) Description and/or drawing of the elements of...
3.2.9.3.1. (Euro VI only) Actual exhaust back pressure at rated engine...
3.2.9.7.1. (Euro VI only) Acceptable Exhaust system volume: … dm3
3.2.12.1.1. (Euro VI only) Device for recycling crankcase gases: yes/no (41)...
3.2.12.2. Pollution control devices (if not covered by another heading)
3.2.12.2.5. Evaporative emissions control system (petrol and ethanol engines only): yes/no...
3.2.12.2.7.0.1. (Euro VI only) Number of OBD engine families within the...
3.2.12.2.7.0.2. (Euro VI only) List of the OBD engine families (when...
3.2.12.2.7.0.3. (Euro VI only) Number of the OBD engine family the...
3.2.12.2.7.0.4. (Euro VI only) Manufacturer references of the OBD-Documentation required by...
3.2.12.2.7.0.5. (Euro VI only) When appropriate, manufacturer reference of the documentation...
3.2.12.2.7.0.6. (Euro VI only) When appropriate, manufacturer reference of the documentation...
3.2.12.2.7.0.7. Written description and/or drawing of the MI (46): …
3.2.12.2.7.0.8. Written description and/or drawing of the OBD off-board communication interface...
3.2.12.2.7.6.5. (Euro VI only) OBD Communication protocol standard (47):
3.2.12.2.7.7. (Euro VI only) Manufacturer reference of the OBD related information...
3.2.12.2.7.7.1. As an alternative to a manufacturer reference provided in point...
3.2.12.2.7.8. (EURO VI only) OBD components on-board the vehicle
3.2.12.2.7.8.2. Written description and/or drawing of the MI (48)
3.2.12.2.7.8.3. Written description and/or drawing of the OBD off-board communication interface...
3.2.12.2.8.1. (Euro VI only) Systems to ensure the correct operation of...
3.2.12.2.8.2.1. (Euro VI only) Engine with permanent deactivation of the driver...
3.2.12.2.8.3. (Euro VI only) Number of OBD engine families within the...
3.2.12.2.8.4. (Euro VI only) List of the OBD engine families (when...
3.2.12.2.8.5. (Euro VI only) Number of the OBD engine family the...
3.2.12.2.8.6. (Euro VI only) Lowest concentration of the active ingredient present...
3.2.12.2.8.7. (Euro VI only) When appropriate, manufacturer reference of the Documentation...
3.2.12.2.8.8. (Euro VI only) Components on-board the vehicle of the systems...
3.2.12.2.8.8.1. List of components on-board the vehicle of the systems ensuring...
3.2.12.2.8.8.2. When appropriate, manufacturer reference of the documentation package related to...
3.2.12.2.8.8.3. Written description and/or drawing of the warning signal (48)
3.2.12.2.10. Periodically regenerating system: (provide the information below for each separate...
3.2.12.2.10.1. Method or system of regeneration, description and/or drawing: ….
3.2.13.1. Location of the absorption coefficient symbol (compression ignition engines only):...
3.2.17.8.1.0.1. (Euro VI only) Self adaptive feature? yes/no (4)
3.2.17.8.1.0.2. (Euro VI only) Calibration for a specific gas composition NG-H/NG-L/NG-HL/LNG...
3.3. Electric machine (describe information of each type of electric machine...
3.4.2. Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: (4)...
3.5.9. CO2 emissions and fuel consumption certification (for heavy-duty vehicles, as...
3.5.9.2. Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
9.9.1. Rear-view mirrors, stating, for each rear-view mirror:
9.9.1.6. Optional equipment which may affect the rearward field of vision:...
9.10.3.2. Seat(s) designated for use only when the vehicle is stationary:...
9.10.8. Gas used as refrigerant in the air-conditioning system: …
9.10.8.1. The air-conditioning system is designed to contain fluorinated greenhouse gases...
9.12.2. Nature and position of supplementary restraint systems (indicate yes/no/optional):
9.17.1. Photographs and/or drawings of the locations of the statutory plates...
9.17.2. Photographs and/or drawings of the statutory plate and inscriptions (completed...
9.17.3. Photographs and/or drawings of the vehicle identification number (completed example...
9.17.4.1. The meaning of characters in the vehicle descriptor section (VDS)...
9.17.4.2. If characters in the vehicle descriptor second section are used...
9.23.1. A detailed description, including photographs and/or drawings, of the vehicle...
9.24.1. General arrangement (drawings or photographs) indicating the position and attachment...
9.24.3. Complete details of fittings required and full instructions, including torque...
11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS
2. MASSES AND DIMENSIONS (9) (10) (11)
2.1.2.1. Axle spacing between consecutive axles going from the foremost to...
2.4.1.1.3. In the case of trailers, maximum permissible drawbar length (19):...
2.4.2.1.2. In the case of trailers, maximum permissible drawbar length (19):...
2.4.2.2.1. Thickness of the walls (in the case of vehicles designed...
2.4.2.3. Height (in running order) (21) (for suspension adjustable for height,...
2.6.1. Distribution of this mass among the axles and, in the...
2.6.2. Mass of the optional equipment (as defined in point (5)...
2.7. Minimum mass of the completed vehicle as stated by the...
2.8. Technically permissible maximum laden mass stated by the manufacturer (32)...
2.8.1. Distribution of this mass among the axles, and in the...
2.10. Technically permissible mass on each group of axles: …
2.12. Technically permissible maximum mass at the coupling point:
2.12.2. Of a semi-trailer, a centre-axle trailer or a rigid drawbar...
2.16. Registration/in service maximum permissible masses (optional)
2.16.1. Registration/in service maximum permissible laden mass: …
2.16.2. Registration/in service maximum permissible mass on each axle and, in...
2.16.3. Registration/in service maximum permissible mass on each group of axles:...
9.17.1. Photographs and/or drawings of the locations of the statutory plates...
9.17.2. Photographs and/or drawings of the statutory plate and inscriptions (completed...
9.17.3. Photographs and/or drawings of the vehicle identification number (completed example...
9.17.4.1. The meaning of characters in the vehicle descriptor section (VDS)...
9.17.4.2. If characters in the vehicle descriptor second section are used...
9.26. Aerodynamic device or equipment on the front of the vehicle...
9.27. Aerodynamic device or equipment on the rear of the vehicle...
11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS
TEMPLATES FOR APPROVAL CERTIFICATES
1.1. The approval certificates shall be issued in paper of maximum...
1.2. All information on the approval certificates shall be provided in...
1.3. Model A shall be used for whole vehicle type-approvals.
1.5. Model C shall be used for GB component type-approvals and...
1.7. Model E shall be used for ... individual vehicle approval....
SECTION I 0.1. Make (trade name of manufacturer): …
0.3. Means of identification of type, if marked on the vehicle:...
0.5. Company name and address of manufacturer of the incomplete/complete/completed vehicle...
0.5.1. For multi-stage approved vehicles, company name and address of the...
0.9. Name and address of the manufacturer’s representative (if any): …...
SECTION II 1. Technical service responsible for carrying out the tests (106):...
SECTION II 1. Additional information (where applicable): see Addendum.
SECTION II 1. Additional information (where applicable): see Addendum
SECTION I The undersigned [… name and … position], hereby certifies that...
SECTION II 1. Technical service responsible for carrying out the tests: …...
Appendix 1 Part 2 of the ... individual approval certificate
47. Exhaust emission level (116): Euro … or other legislation: …...
49. CO2 emissions/fuel consumption/electric energy consumption (162):
2. NEDC: pure electric vehicles and OVC hybrid electric vehicles
3.2. Total CO2 emissions savings due to the eco-innovation(s) (68)
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Regulation...
51. For special purpose vehicles: designation in accordance with point 5...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static vertical mass at the coupling point:…...
47. Exhaust emission level (116): Euro … or other legislation: …...
49. CO2 emissions/fuel consumption/electric energy consumption (162):
2. NEDC: pure electric vehicles and OVC hybrid electric vehicles
4. All power trains, except pure electric vehicle, under Regulation (EU)...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Regulation...
51. For special purpose vehicles: designation in accordance with point 5...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static vertical mass at the coupling point:…...
47. Exhaust emission level (116): Euro … or other legislation: …...
49. CO2 emissions/fuel consumption/electric energy consumption (1):
2. NEDC: pure electric vehicles and OVC hybrid electric vehicles
3.2. Total CO2 emissions savings due to the eco-innovation(s) (68)
4. All power trains, except pure electric vehicle, under Regulation (EU)...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Regulation...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static vertical mass at the coupling point:...
47. Exhaust emission level (116): Euro … or other legislation: …...
49. CO2 emissions/fuel consumption/electric energy consumption (1):
2. NEDC: pure electric vehicles and OVC hybrid electric vehicles
4. All power trains, except pure electric vehicle, under Regulation (EU)...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Regulation...
16.4. Technically permissible maximum mass of the combination: … kg
17. Intended registration/in service maximum permissible masses in national traffic (4)...
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static vertical mass at the coupling point:...
16.4. Technically permissible maximum mass of the combination: … kg
17. Intended registration/in service maximum permissible masses in national traffic (4)...
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
19. Technically permissible maximum static vertical mass at the coupling point:...
APPROVAL CERTIFICATE NUMBERING SYSTEM
1. Approval certificates shall be numbered in accordance with the method...
2. The number of the approval certificate for whole-vehicle type-approvals shall...
2.1 Section 1: The lower-case letter ‘g’ is followed by the number 11....
2.2 Section 2: (only for a GB type-approval of a system, component or...
2.3 Section 3: (applicable to all approvals): Either the number of the Regulation...
2.4 Section 4: (applicable to all approvals): A five-digit sequential number (with leading...
2.5 Section 5: (not for ... individual vehicle approvals): A two-digit sequential number...
3.1. Examples of a third type-approval of a system, component or...
3.2. Example of a second extension to the fourth GB whole-vehicle...
3.3. Example of a GB type-approval of vehicles produced in medium...
3.4. Example of a ... type-approval of vehicles produced in small...
3.6. Example of an individual vehicle approval granted ... in accordance...
4. This Annex does not apply to type-approvals granted in accordance...
4.2. Section 2: The number of Regulation (EC) No 661/2009 (i.e. ‘661/2009’)
4.3. Section 3: Section 3 shall be composed of the following elements in...
4.6.1. Example of a type-approval granted ... in accordance with UN...
4.6.2. Example of a type-approval granted ... in accordance with UN...
GB type-approval mark of components and separate technical units
1. The GB type-approval mark for components and separate technical units...
1.1. A rectangle surrounding the lower-case letter ‘g’, followed by the...
1.2. In the vicinity of the rectangle, two digits indicating the...
1.3. An additional symbol or symbols located above the rectangle where...
2. The type-approval mark of components or separate technical units shall...
3. Example of a type-approval mark for a fourth type-approval of...
4. This Annex does not apply to type-approvals granted in accordance...
TEMPLATE FOR THE TEST RESULT SHEET
2. Results of the exhaust emission tests
2.1. Emissions from motor vehicles tested under the test procedure for...
2.1.1. Type 1 test (130) (131), (vehicle emissions in the test...
2.1.2. Type 2 test (130) (131), (emissions data required at type-approval...
2.1.5. Type 5 test (durability of anti-pollution control devices):
2.1.6. Type 6 test (average emissions at low ambient temperatures):
2.2. Emissions from engines tested under the test procedure for heavy-duty...
3. Results of the CO2 emission, fuel/electric energy consumption, and electric...
3.1. Internal combustion engines, including not externally chargeable hybrid electric vehicles...
3.2. Externally chargeable hybrid electric vehicles (OVC) (132)
3.5. The correlation tool output report(s) referred to in Commission Implementing...
3.5.3. Internal combustion engines, including not externally chargeable hybrid electric vehicles...
3.5.4. Externally chargeable hybrid electric vehicles (OVC) (132)
4. Results of the tests for vehicles fitted with eco-innovation(s) (141)...
FORMAT OF TEST REPORTS FOR THE TYPE-APPROVAL OF A SYSTEM, COMPONENT OR SEPARATE TECHNICAL UNIT
CERTIFICATE OF CONFORMITY IN PAPER FORMAT
APPENDIX TEMPLATES FOR THE CERTIFICATE OF CONFORMITY IN PAPER FORMAT
PART I COMPLETE AND COMPLETED VEHICLES
MODEL A2 —PART 1 COMPLETE VEHICLES TYPE-APPROVED IN SMALL SERIES
MODEL B —PART 1 COMPLETED VEHICLES
0.2.2. For multi-stage approved vehicles, type-approval information of the base/previous stages...
0.2.3.5. Roadload Matrix family’s identifier (if applicable): …
0.5.1. For multi-stage approved vehicles, company name and address of the...
0.6. Location and method of attachment of the statutory plates: …...
0.9. Name and address of the manufacturer’s representative (if any): …...
Attachments: Certificate of conformity delivered at each previous stage.
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
3.2. Total CO2 emissions savings due to the eco-innovation(s) (150) (repeat...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
3.2. Total CO2 emissions saving due to the eco-innovation(s) (68) (repeat...
4. All power trains except pure electric vehicles under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
4. All power trains except pure electric vehicles under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
49.2. Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
PART 2 VEHICLE CATEGORIES O1 AND O2
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
19. Technically permissible maximum static mass on the coupling point of...
PART 2 VEHICLE CATEGORIES O3 AND O4
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
19. Technically permissible maximum static mass on the coupling point of...
MODEL C1 —PART 1 INCOMPLETE VEHICLES
0.2.2. For multi-stage approved vehicles, type-approval information of the base/previous stages...
0.2.3.5. Roadload Matrix family’s identifier (if applicable): …
0.5.1. For multi-stage approved vehicles, company name and address of the...
0.6. Location and method of attachment of the statutory plates: …...
0.9. Name and address of the manufacturer’s representative (if any): …...
MODEL C2 —PART 1 INCOMPLETE VEHICLES TYPE-APPROVED IN SMALL SERIES
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
3.2. Total CO2 emissions savings due to the eco-innovation(s) (68) (repeat...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
14. Mass in running order of the incomplete vehicle: … kg...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
14. Mass in running order of the incomplete vehicle: … kg...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
3.2. Total CO2 emissions savings due to the eco-innovation(s) (68) (repeat...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
General construction characteristics
3.1. Specify if the vehicle is non-automated/automated/fully automated (8)
14. Mass in running order of the incomplete vehicle: … kg...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
23.1. Class of Hybrid [electric] vehicle: OVC-HEV/NOVC-HEV/OVC-FCHV/NOVC-FCHV (4)
26. Fuel: Diesel/petrol/LPG/NG – Biomethane/Ethanol/Biodiesel/Hydrogen (4)
26.2. (Dual-fuel only) Type 1A/Type 1B/Type 2A/Type 2B/Type 3B (4)
27.4. Maximum 30 minutes power: … kW (electric motor) (4) (112)...
28.1. Gearbox ratios (to complete for vehicles with manual shift transmissions)...
28.1.2. Final drive ratios (to complete if and where applicable)
47.1.2.1. Projected frontal area of air entrance of the front grille...
49. CO2 emissions/fuel consumption/electric energy consumption (162) (1):
1. All power trains, except pure electric vehicles (if applicable)
2. Pure electric vehicles and OVC hybrid electric vehicles (if applicable)...
4. All power trains, except pure electric vehicle, under Commission Regulation...
5. Pure electric vehicles and OVC hybrid electric vehicles, under Commission...
49.2. Zero emission heavy-duty vehicle: yes/no (4) (72) (169)
14. Mass in running order of the incomplete vehicle: … kg...
16.4. Technically permissible maximum mass of the combination: … kg
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
17.4. Intended registration/in service maximum permissible mass of the combination: …...
18. Technically permissible maximum towable mass in case of:
19. Technically permissible maximum static mass at the coupling point: …...
PART 2 VEHICLE CATEGORIES O1 AND O2
14. Mass in running order of the incomplete vehicle: … kg...
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
19.1. Technically permissible maximum static mass on the coupling point of...
5.3. Vehicle equipped with aerodynamic device or equipment on the rear/not...
10. Distance between the centre of the coupling device and the...
14. Mass in running order of the incomplete vehicle: … kg...
17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:...
17.3. Intended registration/in service maximum permissible laden mass on each axle...
19.1. Technically permissible maximum static mass on the coupling point of...
Options/Help
Print Options
PrintTable of Contents
PrintThe Whole Regulation
You have chosen to open the Whole Regulation
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.