- Latest available (Revised)
- Original (As adopted by EU)
Commission Directive 2004/104/EC of 14 October 2004 adapting to technical progress Council Directive 72/245/EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amending Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Article 1.The Annexes to Directive 72/245/EEC are replaced by the Annexes...
Article 2.(1) With effect from 1 January 2006, for vehicles, components...
Article 3.Directive 70/156/EEC is amended as follows: Annex I is amended...
Article 5.This Directive shall enter into force on the 20th day...
REQUIREMENTS TO BE MET BY VEHICLES AND ELECTRICAL/ELECTRONIC SUBASSEMBLIES FITTED TO A VEHICLE
3. APPLICATION FOR EC TYPE-APPROVAL
3.1. Approval of a vehicle type
3.1.1. The application for approval of a vehicle type, with regard...
3.1.2. A model for the information document is given in Annex...
3.1.3. The vehicle manufacturer shall draw up a schedule describing all...
3.1.4. A representative vehicle shall be selected from this schedule for...
3.1.5. The choice of the vehicle(s) in conformity with paragraph 3.1.4...
3.1.6. The manufacturer may supplement the application with a report from...
3.1.7. If the technical service responsible for the type-approval test carries...
3.1.8. The vehicle manufacturer must provide a statement of frequency bands,...
3.2. Approval of a type of electrical/electronic subassembly (ESA)
3.2.2. The application for approval of a type of ESA with...
3.2.3. A model for the information document is given in Annex...
3.2.4. The manufacturer may supplement the application with a report from...
3.2.5. If the technical service responsible for the type-approval test carries...
3.2.6. The sample(s) must be clearly and indelibly marked with the...
3.2.7. Where applicable, any restrictions on use should be identified. Any...
3.2.8. ESAs which are brought to the market as spare parts...
3.2.9. Components sold as aftermarket equipment and intended for the installation...
6.2. Specifications concerning broadband electromagnetic radiation from vehicles
6.3. Specifications concerning narrowband electromagnetic radiation from vehicles.
6.3.2. Vehicle narrowband type-approval limits
6.3.2.1. If measurements are made using the method described in Annex...
6.3.2.2. If measurements are made using the method described in Annex...
6.3.2.3. On the vehicle representative of its type, the measured values,...
6.3.2.4. Notwithstanding the limits defined in paragraphs 6.3.2.1, 6.3.2.2 and 6.3.2.3...
6.4. Specifications concerning immunity of vehicles to electromagnetic radiation.
6.5. Specification concerning broadband electromagnetic interference generated by ESAs
6.6. Specifications concerning narrowband electromagnetic interference generated by ESAs.
6.7. Specifications concerning immunity of ESAs to electromagnetic radiation.
6.8. Specifications concerning the immunity to transient disturbances conducted along supply...
6.9. Specifications concerning the emission of conducted disturbances
8.1. Where a vehicle or electrical/electronic system or ESA does not...
8.2. Vehicles which do not have electrical/electronic systems with ‘immunity-related functions’...
8.3. ESAs with no immunity-related functions need not be tested for...
8.6. The loss of function of receivers during the immunity test,...
8.7. RF transmitters shall be tested in the transmit mode. Wanted...
ATTACHMENTS
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: