Search Legislation

Regulation (EU) No 1007/2011 of the European Parliament and of the CouncilShow full title

Regulation (EU) No 1007/2011 of the European Parliament and of the Council of 27 September 2011 on textile fibre names and related labelling and marking of the fibre composition of textile products and repealing Council Directive 73/44/EEC and Directives 96/73/EC and 2008/121/EC of the European Parliament and of the Council (Text with EEA relevance)

 Help about what version

What Version

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

There are outstanding changes not yet made to Regulation (EU) No 1007/2011 of the European Parliament and of the Council. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.

View outstanding changes

Changes and effects yet to be applied to :

Changes and effects yet to be applied to the whole legislation item and associated provisions

  1. Introductory Text

  2. CHAPTER 1 GENERAL PROVISIONS

    1. Article 1.Subject matter

    2. Article 2.Scope

    3. Article 3.Definitions

    4. Article 4.General requirement on the making available on the market of textile products

  3. CHAPTER 2 TEXTILE FIBRE NAMES AND RELATED LABELLING AND MARKING REQUIREMENTS

    1. Article 5.Textile fibre names

    2. Article 6.Applications for new textile fibre names

    3. Article 7.Pure textile products

    4. Article 8.Fleece wool or virgin wool products

    5. Article 9.Multi-fibre textile products

    6. Article 10.Decorative fibres and fibres with antistatic effect

    7. Article 11.Multi-component textile products

    8. Article 12.Textile products containing non-textile parts of animal origin

    9. Article 13.Labelling and marking of textile products listed in Annex IV

    10. Article 14.Labels and markings

    11. Article 15.Obligation to supply the label or marking

    12. Article 16.The use of textile fibre names and fibre composition descriptions

    13. Article 17.Derogations

  4. CHAPTER 3 MARKET SURVEILLANCE

    1. Article 18.Market surveillance checks

    2. Article 19.Determination of fibre composition

    3. Article 20.Tolerances

  5. CHAPTER 4 FINAL PROVISIONS

    1. Article 21.Delegated acts

    2. Article 22.Exercise of the delegation

    3. Article 23.Reporting

    4. Article 24.Review

    5. Article 25.Study on hazardous substances

    6. Article 26.Transitional provision

    7. Article 27.Repeal

    8. Article 28.Entry into force

  6. Signature

    1. ANNEX I

    2. ANNEX II

      Minimum requirements regarding a technical file to be included in the application for a new textile fibre name

      1. A technical file to be attached to an application for...

      2. Proposed name of the textile fibre: The name proposed shall...

      3. The manufacturer or any person acting on the manufacturer’s behalf...

    3. ANNEX III

      Names referred to in Article 8(1)

      1. — in Bulgarian ‘необработена вълна’ — in Spanish ‘lana virgen’...

    4. ANNEX IV

    5. ANNEX V

      Textile products for which labelling or marking is not mandatory

      1. 1. Sleeve-supporting armbands

      2. 2. Watch straps of textile materials

      3. 3. Labels and badges

      4. 4. Stuffed pan-holders of textile materials

      5. 5. Coffee cosy covers

      6. 6. Tea cosy covers

      7. 7. Sleeve protectors

      8. 8. Muffs other than in pile fabric

      9. 9. Artificial flowers

      10. 10. Pin cushions

      11. 11. Painted canvas

      12. 12. Textile products for base and underlying fabrics and stiffenings

      13. 13. Old made-up textile products, where explicitly stated to be such...

      14. 14. Gaiters

      15. 15. Packaging, not new and sold as such

      16. 16. Fancy goods and saddlery, of textile materials

      17. 17. Travel goods of textile materials

      18. 18. Hand-embroidered tapestries, finished or unfinished, and materials for their production,...

      19. 19. Slide fasteners

      20. 20. Buttons and buckles covered with textile materials

      21. 21. Book covers of textile materials

      22. 22. Toys

      23. 23. Textile parts of footwear

      24. 24. Table mats having several components and a surface area of...

      25. 25. Oven gloves and cloths

      26. 26. Egg cosy covers

      27. 27. Make-up cases

      28. 28. Tobacco pouches of textile fabric

      29. 29. Spectacle, cigarette and cigar, lighter and comb cases of textile...

      30. 30. Covers for mobile telephones and portable media players with a...

      31. 31. Protective requisites for sports with the exception of gloves

      32. 32. Toilet cases

      33. 33. Shoe-cleaning cases

      34. 34. Funeral products

      35. 35. Disposable products, with the exception of wadding

      36. 36. Textile products subject to the rules of the European Pharmacopoeia...

      37. 37. Textile products including cordage, ropes and string, subject to item...

      38. 38. Textile products for protection and safety purposes such as safety...

      39. 39. Air-supported structures (e.g. sports halls, exhibition stands or storage facilities),...

      40. 40. Sails

      41. 41. Animal clothing

      42. 42. Flags and banners

    6. ANNEX VI

      Textile products for which inclusive labelling is sufficient

      1. 1. Floorcloths

      2. 2. Cleaning cloths

      3. 3. Edgings and trimmings

      4. 4. Passementerie

      5. 5. Belts

      6. 6. Braces

      7. 7. Suspenders and garters

      8. 8. Shoe and boot laces

      9. 9. Ribbons

      10. 10. Elastic

      11. 11. New packaging sold as such

      12. 12. Packing string and agricultural twine; string, cordage and ropes other...

      13. 13. Table mats

      14. 14. Handkerchiefs

      15. 15. Bun nets and hair nets

      16. 16. Ties and bow ties for children

      17. 17. Bibs, washgloves and face flannels

      18. 18. Sewing, mending and embroidery yarns presented for retail sale

      19. 19. Tape for curtains and blinds and shutters

    7. ANNEX VII

    8. ANNEX VIII

      Methods for the quantitative analysis of binary and ternary textile fibre mixtures

      1. CHAPTER 1 I. Preparation of laboratory test samples and test specimens to...

        1. I. Preparation of laboratory test samples and test specimens to determine...

          1. 1. FIELD OF APPLICATION

          2. 2. DEFINITIONS

            1. 2.1. Bulk source

            2. 2.2. Laboratory bulk sample

            3. 2.3. Laboratory test sample

            4. 2.4. Test specimen

          3. 3. PRINCIPLE

          4. 4. SAMPLING FROM LOOSE FIBRES

            1. 4.1. Unorientated fibres

            2. 4.2. Orientated fibres (cards, webs, slivers, rovings)

          5. 5. SAMPLING YARN

            1. 5.1. Yarn in packages or in banks

            2. 5.2. Yarn on warp

          6. 6. SAMPLING FABRIC

            1. 6.1. From a laboratory bulk sample consisting of a single cutting...

            2. 6.2. From a laboratory bulk sample consisting of several cuttings

          7. 7. SAMPLING MADE-UP AND FINISHED PRODUCTS

        2. II. Introduction to the methods for the quantitative analysis of textile...

      2. CHAPTER 2 METHODS FOR QUANTITATIVE ANALYSIS OF CERTAIN BINARY TEXTILE FIBRE MIXTURES...

        1. METHODS FOR QUANTITATIVE ANALYSIS OF CERTAIN BINARY TEXTILE FIBRE MIXTURES...

          1. I. General information common to the methods given for the quantitative...

            1. I.1. FIELD OF APPLICATION

            2. I.2. PRINCIPLE

            3. I.3. MATERIALS AND EQUIPMENT

              1. I.3.1. Apparatus

                1. I.3.1.1. Filter crucibles and weighing bottles large enough to contain such...

                2. I.3.1.2. Vacuum flask.

                3. I.3.1.3. Desiccator containing self-indicating silica gel.

                4. I.3.1.4. Ventilated oven for drying specimens at 105 ± 3 °C....

                5. I.3.1.5. Analytical balance, accurate to 0,0002 g.

                6. I.3.1.6. Soxhlet extractor or other apparatus giving identical results.

              2. I.3.2. Reagents.

                1. I.3.2.1. Light petroleum, redistilled, boiling range 40 to 60 °C.

                2. I.3.2.2. Other reagents are specified in the appropriate section of each...

                3. I.3.2.3. Distilled or deionised water.

                4. I.3.2.4. Acetone.

                5. I.3.2.5. Orthophosphoric acid.

                6. I.3.2.6. Urea.

                7. I.3.2.7. Sodium bicarbonate.

            4. I.4. CONDITIONING AND TESTING ATMOSPHERE

            5. I.5. LABORATORY TEST SAMPLE

            6. I.6. PRE-TREATMENT OF LABORATORY TEST SAMPLE

            7. I.7. TEST PROCEDURE

              1. I.7.1. General instructions

                1. I.7.1.1. Drying

                2. I.7.1.2. Cooling

                3. I.7.1.3. Weighing

              2. I.7.2. Procedure

            8. I.8. CALCULATION AND EXPRESSION OF RESULTS

              1. I.8.1. Calculation of percentage of insoluble component on clean, dry mass...

              2. I.8.2. Calculation of percentage of insoluble component on clean, dry mass...

          2. II. Method of quantitative analysis by manual separation

            1. II.1. FIELD OF APPLICATION

            2. II.2. PRINCIPLE

            3. II.3. APPARATUS

              1. II.3.1. Weighing bottle or any other apparatus giving identical results.

              2. II.3.2. Desiccator containing self-indicating silica gel.

              3. II.3.3. Ventilated oven for drying specimens at 105 ± 3 °C....

              4. II.3.4. Analytical balance, accurate to 0,0002 g.

              5. II.3.5. Soxhlet extractor, or other apparatus giving an identical result.

              6. II.3.6. Needle.

              7. II.3.7. Twist tester or similar apparatus.

            4. II.4. REAGENTS

              1. II.4.1. Light petroleum, redistilled, boiling range 40 to 60 °C.

              2. II.4.2. Distilled or deionised water.

              3. II.4.3. Acetone.

              4. II.4.4. Orthophosphoric acid.

              5. II.4.5. Urea.

              6. II.4.6. Sodium bicarbonate.

            5. II.5. CONDITIONING AND TESTING ATMOSPHERE

            6. II.6. LABORATORY TEST SAMPLE

            7. II.7. PRE-TREATMENT OF LABORATORY TEST SAMPLE

            8. II.8. PROCEDURE

              1. II.8.1. Analysis of yarn

              2. II.8.2. Analysis of cloth

            9. II.9. CALCULATION AND EXPRESSION OF RESULTS

              1. II.9.1. Calculation of percentage masses of clean, dry fibre, disregarding loss...

              2. II.9.2. For calculation of the percentage of each component with adjustment...

          3. III.1. PRECISION OF THE METHODS

          4. III.2. TEST REPORT

            1. III.2.1. State that the analysis was conducted in accordance with this...

            2. III.2.2. Give details of any special pre-treatment (see I.6).

            3. III.2.3. Give the individual results and the arithmetic mean, each to...

          5. IV. Special methods

            1. METHOD No 1 ACETATE AND CERTAIN OTHER FIBRES (Acetone method) 1. FIELD OF...(Acetone method) 1. FIELD OF APPLICATION This method is applicable,...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (additional to those specified in the general...

                1. 3.1. Apparatus

                2. 3.2. Reagent

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            2. METHOD No 2 CERTAIN PROTEIN FIBRES AND CERTAIN OTHER FIBRES (Method using hypochlorite)...(Method using hypochlorite) 1. FIELD OF APPLICATION This method is...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Erlenmeyer flask with ground-glass stopper, 250 ml.

                  2. (b) Thermostat, adjustable to 20 ± 2 °C.

                2. 3.2. Reagents

                  1. (a) Hypochlorite reagent

                    1. (i) Lithium hypochlorite solution

                    2. (ii) Sodium hypochlorite solution

                  2. (b) Acetic acid, dilute solution

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            3. METHOD No 3 VISCOSE, CUPRO OR CERTAIN TYPES OF MODAL AND CERTAIN OTHER...(Method using formic acid and zinc chloride) 1. FIELD OF...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flasks of at least 200 ml capacity.

                  2. (b) Apparatus for maintaining flasks at 40 ± 2 °C.

                2. 3.2. Reagents

                  1. (a) Solution containing 20 g of fused anhydrous zinc chloride and...

                    1. Note:

                  2. (b) Ammonium hydroxide solution: dilute 20 ml of a concentrated ammonia...

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            4. METHOD No 4 POLYAMIDE OR NYLON, AND CERTAIN OTHER FIBRES (Method using 80...(Method using 80 % m/m formic acid) 1. FIELD OF...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                2. 3.2. Reagents

                  1. (a) Formic acid (80 % m/m, relative density at 20 °C:...

                  2. (b) Ammonia, dilute solution: dilute 80 ml of concentrated ammonia solution...

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            5. METHOD No 5 ACETATE AND CERTAIN OTHER FIBRES (Method using benzyl alcohol) 1....(Method using benzyl alcohol) 1. FIELD OF APPLICATION This method...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Mechanical shaker.

                  3. (c) Thermostat or other apparatus for keeping the flask at a...

                2. 3.2. Reagents

                  1. (a) Benzyl alcohol.

                  2. (b) Ethanol.

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            6. METHOD No 6 TRIACETATES OR POLYLACTIDE AND CERTAIN OTHER FIBRES (Method using dichloromethane)...(Method using dichloromethane) 1. FIELD OF APPLICATION This method is...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                2. 3.2. Reagent

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            7. METHOD No 7 CERTAIN CELLULOSE FIBRES AND CERTAIN OTHER FIBRES (Method using 75...(Method using 75 % m/m sulphuric acid) 1. FIELD OF...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 500 ml capacity.

                  2. (b) Thermostat or other apparatus for maintaining the flask at 50...

                2. 3.2. Reagents

                  1. (a) Sulphuric acid, 75 ± 2 % m/m

                  2. (b) Ammonia, dilute solution

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            8. METHOD No 8 ACRYLICS, CERTAIN MODACRYLICS OR CERTAIN CHLOROFIBRES AND CERTAIN OTHER FIBRES...(Method using dimethylformamide) 1. FIELD OF APPLICATION This method is...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Water bath at boiling point.

                2. 3.2. Reagent

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            9. METHOD No 9 CERTAIN CHLOROFIBRES AND CERTAIN OTHER FIBRES (Method using 55,5/44,5 %...(Method using 55,5/44,5 % v/v mixture of carbon disulphide and...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Mechanical shaker.

                2. 3.2. Reagents

                  1. (a) Azeotropic mixture of carbon disulphide and acetone (55,5 % by...

                  2. (b) Ethanol (92 % by volume) or methanol.

              4. 4. TEST PROCEDURE

                1. Note:

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            10. METHOD No 10 ACETATE AND CERTAIN OTHER FIBRES (Method using glacial acetic acid)...(Method using glacial acetic acid) 1. FIELD OF APPLICATION This...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Mechanical shaker.

                2. 3.2. Reagent

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            11. METHOD No 11 SILK OR POLYAMIDE AND CERTAIN OTHER FIBRES (Method using 75...(Method using 75 % m/m sulphuric acid) 1. FIELD OF...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                2. 3.2. Reagents

                  1. (a) Sulphuric acid (75 ± 2 % m/m)

                  2. (b) Sulphuric acid, dilute solution: add 100 ml sulphuric acid (relative...

                  3. (c) Ammonia, dilute solution: dilute 200 ml concentrated ammonia (relative density...

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            12. METHOD No 12 JUTE AND CERTAIN ANIMAL FIBRES (Method by determining nitrogen content)...(Method by determining nitrogen content) 1. FIELD OF APPLICATION This...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Kjeldahl digestion flask, 200-300 ml capacity.

                  2. (b) Kjeldahl distillation apparatus with steam injection.

                  3. (c) Titration apparatus, allowing precision of 0,05 ml.

                2. 3.2. Reagents

                  1. (a) Toluene.

                  2. (b) Methanol.

                  3. (c) Sulphuric acid, relative density at 20 °C: 1,84.

                  4. (d) Potassium sulphate.

                  5. (e) Selenium dioxide.

                  6. (f) Sodium hydroxide solution (400 g/litre). Dissolve 400 g of sodium...

                  7. (g) Mixed indicator. Dissolve 0,1 g of methyl red in 95...

                  8. (h) Boric acid solution. Dissolve 20 g of boric acid in...

                  9. (i) Sulphuric acid, 0,02N (standard volumetric solution).

              4. 4. PRE-TREATMENT OF TEST SAMPLE

                1. Note:

              5. 5. TEST PROCEDURE

                1. 5.1. General instructions

                2. 5.2. Detailed procedure

              6. 6. CALCULATION AND EXPRESSION OF RESULTS

                1. 6.1. Calculate the percentage nitrogen content in the dry specimen as...

                2. 6.2. Using the values of 0,22 % for the nitrogen content...

              7. 7. PRECISION

            13. METHOD No 13 POLYPROPYLENE FIBRES AND CERTAIN OTHER FIBRES (Xylene method) 1. FIELD...(Xylene method) 1. FIELD OF APPLICATION This method is applicable,...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Reflux condenser (suitable for liquids of high boiling point), fitting...

                  3. (c) Heating mantle at boiling point of xylene.

                2. 3.2. Reagent

                  1. Note:

              4. 4. TEST PROCEDURE

                1. Notes:

                  1. 1. The filter crucible through which the xylene is to be...

                  2. 2. After the treatment with boiling xylene, ensure that the flask...

                  3. 3. In order to reduce the fire and toxicity hazards to...

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            14. METHOD No 14 CERTAIN FIBRES AND CERTAIN OTHER FIBRES (Method using concentrated sulphuric...(Method using concentrated sulphuric acid) 1. FIELD OF APPLICATION This...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Glass rod with flattened end.

                2. 3.2. Reagents

                  1. (a) Sulphuric acid, concentrated (relative density at 20 °C: 1,84).

                  2. (b) Sulphuric acid, approximately 50 % (m/m) aqueous solution.

                  3. (c) Ammonia, dilute solution.

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            15. METHOD No 15 CHLOROFIBRES, CERTAIN MODACRYLICS, CERTAIN ELASTANES, ACETATES, TRIACETATES AND CERTAIN OTHER...(Method using cyclohexanone) 1. FIELD OF APPLICATION This method is...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Hot extraction apparatus suitable for use in the test procedure...

                  2. (b) Filter crucible to contain the test specimen.

                  3. (c) Porous baffle (porosity grade 1).

                  4. (d) Reflux condenser that can be adapted to the distillation flask....

                  5. (e) Heating device.

                2. 3.2. Reagents

                  1. (a) Cyclohexanone, boiling point 156 °C.

                  2. (b) Ethyl alcohol, 50 % by volume.

                  3. Note:

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            16. METHOD No 16 MELAMINE AND CERTAIN OTHER FIBRES (Method using hot formic acid)...(Method using hot formic acid) 1. FIELD OF APPLICATION This...

              1. 1. FIELD OF APPLICATION

              2. 2. PRINCIPLE

                1. Note:

              3. 3. APPARATUS AND REAGENTS (other than those specified in the general...

                1. 3.1. Apparatus

                  1. (a) Glass-stoppered conical flask of at least 200 ml capacity.

                  2. (b) Shaking water bath or other apparatus to shake and maintain...

                2. 3.2. Reagents

                  1. (a) Formic acid (90 % m/m, relative density at 20 °C:...

                  2. (b) Ammonia, dilute solution: dilute 80 ml of concentrated ammonia solution...

              4. 4. TEST PROCEDURE

              5. 5. CALCULATION AND EXPRESSION OF RESULTS

              6. 6. PRECISION

            17. METHOD No 17 POLYESTER AND CERTAIN OTHER FIBRES (Method using trichloroacetic acid and...(Method using trichloroacetic acid and chloroform) 1. FIELD OF APPLICATION...

              1. 1. FIELD OF APPLICATION

              2. 2. GENERAL INFORMATION

      3. CHAPTER 3 QUANTITATIVE ANALYSIS OF TERNARY TEXTILE FIBRE MIXTURES INTRODUCTION In general,...

        1. QUANTITATIVE ANALYSIS OF TERNARY TEXTILE FIBRE MIXTURES

          1. INTRODUCTION

          2. I. General information on methods for the quantitative chemical analysis of...

            1. I.1. FIELD OF APPLICATION

            2. I.2. PRINCIPLE

            3. I.3. MATERIALS AND EQUIPMENT

              1. I.3.1. Apparatus

                1. I.3.1.1. Filter crucibles and weighing bottles large enough to contain such...

                2. I.3.1.2. Vacuum flask.

                3. I.3.1.3. Desiccator containing self-indicating silica gel.

                4. I.3.1.4. Ventilated oven for drying specimens at 105 ± 3 °C....

                5. I.3.1.5. Analytical balance, accurate to 0,0002 g.

                6. I.3.1.6. Soxhlet extractor or other apparatus giving identical results.

              2. I.3.2. Reagents

                1. I.3.2.1. Light petroleum, redistilled, boiling range 40 to 60 °C.

                2. I.3.2.2. Other reagents are specified in the appropriate sections of each...

                3. I.3.2.3. Distilled or deionised water.

                4. I.3.2.4. Acetone.

                5. I.3.2.5. Orthophosphoric acid.

                6. I.3.2.6. Urea.

                7. I.3.2.7. Sodium bicarbonate.

            4. I.4. CONDITIONING AND TESTING ATMOSPHERE

            5. I.5. LABORATORY TEST SAMPLE

            6. I.6. PRE-TREATMENT OF LABORATORY TEST SAMPLE

            7. I.7. TEST PROCEDURE

              1. I.7.1. General instructions

                1. I.7.1.1. Drying

                2. I.7.1.2. Cooling

                3. I.7.1.3. Weighing

              2. I.7.2. Procedure

            8. I.8. CALCULATION AND EXPRESSION OF RESULTS

              1. I.8.1. Calculation of percentages of mass of clean dry fibres disregarding...

                1. I.8.1.1. - VARIANT 1 -

                2. I.8.1.2. - VARIANT 2 -

                3. I.8.1.3. - VARIANT 3 -

                4. I.8.1.4. - VARIANT 4 -

              2. I.8.2. Calculation of the percentage of each component with adjustment by...

              3. I.8.3. Note:

          3. II. Method of quantitative analysis by manual separation of ternary fibre...

            1. II.1. FIELD OF APPLICATION

            2. II.2. PRINCIPLE

            3. II.3. APPARATUS

              1. II.3.1. Weighing bottles or other apparatus giving identical results.

              2. II.3.2. Desiccator containing self-indicating silica gel.

              3. II.3.3. Ventilated oven for drying specimens at 105 ± 3 °C....

              4. II.3.4. Analytical balance accurate to 0,0002 g.

              5. II.3.5. Soxhlet extractor, or other apparatus giving identical results.

              6. II.3.6. Needle.

              7. II.3.7. Twist tester or similar apparatus.

            4. II.4. REAGENTS

              1. II.4.1. Light petroleum, redistilled, boiling range 40 to 60 °C.

              2. II.4.2. Distilled or deionised water.

            5. II.5. CONDITIONING AND TESTING ATMOSPHERE

            6. II.6. LABORATORY TEST SAMPLE

            7. II.7. PRE-TREATMENT OF LABORATORY TEST SAMPLES

            8. II.8. PROCEDURE

              1. II.8.1. Analysis of yarn

              2. II.8.2. Analysis of cloth

            9. II.9. CALCULATION AND EXPRESSION OF RESULTS

              1. II.9.1. Calculation of percentage masses of clean dry fibre, disregarding loss...

              2. II.9.2. For calculation of the percentage of each component with adjustment...

          4. III. Method of quantitative analysis of ternary fibre mixtures by a...

            1. III.1. PRECISION OF THE METHODS

            2. III.2. TEST REPORT

              1. III.2.1. Indicate the variant(s) used to carry out the analysis, the...

              2. III.2.2. Give details of any special pre-treatments (see I.6).

              3. III.2.3. Give the individual results and the arithmetic mean, each to...

              4. III.2.4. Wherever possible, state the precision of the method for each...

          5. IV. Examples of the calculation of percentages of the components of...

            1. VARIANT No 1

            2. VARIANT No 4

          6. V. Table of typical ternary fibre mixtures which may be analysed...

    9. ANNEX IX

    10. ANNEX X

  7. ATTACHMENTS

    1. STATEMENT BY THE EUROPEAN PARLIAMENT AND THE COUNCIL

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources