- Latest available (Revised)
- Original (As adopted by EU)
Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Regulation (EU) 2016/1011 of the European Parliament and of the Council, Article 11 is up to date with all changes known to be in force on or before 07 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
1.The provision of a benchmark shall be governed by the following requirements in respect of its input data:
(a)the input data shall be sufficient to represent accurately and reliably the market or economic reality that the benchmark is intended to measure.
The input data shall be transaction data, if available and appropriate. If transaction data is not sufficient or is not appropriate to represent accurately and reliably the market or economic reality that the benchmark is intended to measure, input data which is not transaction data may be used, including estimated prices, quotes and committed quotes, or other values;
(b)the input data referred to in point (a) shall be verifiable;
(c)the administrator shall draw up and publish clear guidelines regarding the types of input data, the priority of use of the different types of input data and the exercise of expert judgement, to ensure compliance with point (a) and the methodology;
(d)where a benchmark is based on input data from contributors, the administrator shall obtain, where appropriate, the input data from a reliable and representative panel or sample of contributors so as to ensure that the resulting benchmark is reliable and representative of the market or economic reality that the benchmark is intended to measure;
(e)the administrator shall not use input data from a contributor if the administrator has any indication that the contributor does not adhere to the code of conduct referred to in Article 15, and in such a case shall obtain representative publicly available data.
2.Administrators shall ensure that their controls in respect of input data include:
(a)criteria that determine who may contribute input data to the administrator and a process for selecting contributors;
(b)a process for evaluating a contributor's input data and for stopping the contributor from providing further input data, or applying other penalties for non-compliance against the contributor, where appropriate; and
(c)a process for validating input data, including against other indicators or data, to ensure its integrity and accuracy.
3.Where the input data of a benchmark is contributed from a front office function, meaning any department, division, group, or personnel of contributors or any of its affiliates that performs any pricing, trading, sales, marketing, advertising, solicitation, structuring, or brokerage activities, the administrator shall:
(a)obtain data from other sources that corroborate that input data; and
(b)ensure that contributors have in place adequate internal oversight and verification procedures.
4.Where an administrator considers that the input data does not represent the market or economic reality that a benchmark is intended to measure, that administrator shall, within a reasonable time period, either change the input data, the contributors or the methodology in order to ensure that the input data does represent such market or economic reality, or else cease to provide that benchmark.
[F14A.In the case of a critical benchmark, paragraph 4 does not require the administrator to cease providing the benchmark before the end of a period during which the administrator is required to continue publishing the benchmark by Article 21(1) or (2) or by a decision of the FCA under Article 21(3).
4B.In the case of a critical benchmark in respect of which measures adopted under Article 23(6) have effect—
(a)paragraph 4 does not require the administrator to cease providing the benchmark while those measures have effect, and
(b)the administrator's duty under paragraph 4 to make changes is a duty to make changes so far as compatible with those measures.]
5.[F2The FCA may make] technical standards to specify further how to ensure that input data is appropriate and verifiable, as required under points (a) and (b) of paragraph 1, as well as the internal oversight and verification procedures of a contributor that the administrator has to ensure are in place, in compliance with point (b) of paragraph 3, in order to ensure the integrity and accuracy of input data. However, the F3... technical standards shall not cover or apply to administrators of non-significant benchmarks.
[F4The FCA] shall take into account the different types of benchmarks and sectors as set out in this Regulation, the nature of input data, the characteristics of the underlying market or economic reality and the principle of proportionality, the vulnerability of the benchmarks to manipulation as well as the international convergence of supervisory practice in relation to benchmarks.
F5...
F5...
F66.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F1Art. 11(4A)(4B) inserted (1.7.2021) by Financial Services Act 2021 (c. 22), s. 49(5), Sch. 5 para. 4; S.I. 2021/739, reg. 3(n)
F2Words in Art. 11(5) substituted (31.12.2020) by The Benchmarks (Amendment and Transitional Provision) (EU Exit) Regulations 2019 (S.I. 2019/657), regs. 1(2), 10(2)(a)(i) (with regs. 51-53, 65) (as amended by S.I. 2019/1212, regs. 1(3), 20(3)(4) and with savings in S.I. 2019/680, reg. 11); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in Art. 11(5) omitted (31.12.2020) by virtue of The Benchmarks (Amendment and Transitional Provision) (EU Exit) Regulations 2019 (S.I. 2019/657), regs. 1(2), 10(2)(a)(ii) (with regs. 51-53, 65) (as amended by S.I. 2019/1212, regs. 1(3), 20(3)(4) and with savings in S.I. 2019/680, reg. 11); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in Art. 11(5) substituted (31.12.2020) by The Benchmarks (Amendment and Transitional Provision) (EU Exit) Regulations 2019 (S.I. 2019/657), regs. 1(2), 10(2)(b) (with regs. 51-53, 65) (as amended by S.I. 2019/1212, regs. 1(3), 20(3)(4) and with savings in S.I. 2019/680, reg. 11); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in Art. 11(5) omitted (31.12.2020) by virtue of The Benchmarks (Amendment and Transitional Provision) (EU Exit) Regulations 2019 (S.I. 2019/657), regs. 1(2), 10(2)(c) (with regs. 51-53, 65) (as amended by S.I. 2019/1212, regs. 1(3), 20(3)(4) and with savings in S.I. 2019/680, reg. 11); 2020 c. 1, Sch. 5 para. 1(1)
F6Art. 11(6) omitted (31.12.2020) by virtue of The Benchmarks (Amendment and Transitional Provision) (EU Exit) Regulations 2019 (S.I. 2019/657), regs. 1(2), 10(3) (with regs. 51-53, 65) (as amended by S.I. 2019/1212, regs. 1(3), 20(3)(4) and with savings in S.I. 2019/680, reg. 11); 2020 c. 1, Sch. 5 para. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: