- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
2.—(1) The principal Regulations shall be amended in accordance with paragraphs (2) to (9).
(2) In regulation 1(2), in the definition of “the Directive”, for “as amended” there shall be substituted “, (as corrected) and as amended by Commission Directives 92/39/EEC, 93/9/EEC, 95/3/EC and 96/11/EC”(1).
(3) In regulations 4 (monomers)—
(a)in paragraph (1)—
(i)after “the following paragraphs” there shall be inserted “and regulation 13A”,
(ii)in sub-paragraph (a), for “1st January 1997” there shall be substituted “1st January 2002”, and
(iii)in sub-paragraph (b), for “31st December 1996” there shall be substituted “31st December 2001”;
(b)in paragraphs (3), (4), (5) and (6), after “the relevant fraction of” (wherever it occurs) there shall be added “, or section F of,”.
(4) After regulation 13 there shall be inserted—
13A. Notwithstanding regulation 4(1), until 1st January 1999 a plastic material or article may be manufactured using one or more of the monomers identified by PM/REF No., CAS No. (if any) and name respectively in columns 1, 2 and 3 of Section F of Part I of Schedule 1, if any such monomer is of good technical quality and is used in accordance with the restrictions (if any) specified in the corresponding entry in column 4 thereof”.
(5) The Item number and letter, PM/REF No., CAS No. and name for each monomer identified in Schedule 1 shall be inserted in Section A of Part I of Schedule 1 to the principal Regulations (monomers authorised without time limit) at the place corresponding to the number and letter specified for that monomer in the column headed “Item” in Schedule 1.
(6) The contents of Schedule 2 shall be substituted for Section B of Part I of Schedule 1 to the principal Regulations.
(7) In Section D of Part I of Schedule 1 to the principal Regulations (monomers authorised until 1st April 1996), in Item 16, for “51” and “115” in column 4 (restrictions) there shall be substituted “17” and “58” respectively.
(8) The contents of Schedule 3 shall be inserted after Section E of Part I of Schedule 1 to the principal Regulations.
(9) The Item number and letter, PM/REF No., CAS No. (if any) and name for each additive identified in Schedule 4 shall be inserted in Part I of Schedule 3 to the principal Regulations (additives) at the place corresponding to the number and letter specified for that additive in the column headed “Item” in Schedule 4.
Corrigendum in O.J. L349, 13.12.90, p. 26; amending Directives in O.J. No. L168, 23.6.92, p. 21, O.J. No. L90, 14.3.93, p. 26, O.J. No. L41, 23.2.95, p. 44 and O.J. No. L61, 12.3.96, p. 26
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: