The Weights and Measures (Standards Amendment)Regulations 2003

Regulation 2

SCHEDULE REGULATIONS AMENDED

1.  In regulation 55A of the Measuring Equipment (Liquid Fuel delivered from Road Tankers) Regulations 1983(1), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of measuring equipment on road tankers or is a laboratory which has been accredited for the purposes of testing measuring equipment on road tankers in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(2).”.

2.  The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) Regulations 1986(3) shall be amended as follows:—

(i) for paragraph (3) of regulation 23A there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of filling machines or is a laboratory which has been accredited for the purposes of testing filling machines in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(2).”; and

(ii) for paragraph (3) of regulation 32A there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of discontinuous totalisers or is a laboratory which has been accredited for the purposes of testing discontinuous totalisers in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(2).”.

3.  In regulation 23B of the Measuring Equipment (Measures of Length) Regulations 1986(4), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of measures of length or is a laboratory which has been accredited for the purposes of testing measures of length in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(2).”.

4.  Regulation 17A of the Capacity Serving Measures (Intoxicating Liquor) Regulations 1988(5) shall be amended as follows:—

(i) in paragraph (1), after the words “member State” there shall be inserted the words “or an EEA State”; and

(ii) for paragraph (3) there shall be substituted the following paragraphs:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of capacity serving measures or is a laboratory which has been accredited for the purposes of testing capacity serving measures in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(2).

(3A) In this regulation, “EEA State” means a State which is a Contracting Party to the EEA Agreement other than the United Kingdom, and in this paragraph “the EEA Agreement” means the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993.”.

5.  In regulation 7A of the Measuring Equipment (Cold-water Meters) Regulations 1988(6), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of cold-water meters or is a laboratory which has been accredited for the purposes of testing cold-water meters in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025: 2000(7).”.

6.  In regulation 13 of the Measuring Equipment (Capacity Measures and Testing Equipment) Regulations 1995(8), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of capacity measures or is a laboratory which has been accredited for the purposes of testing capacity measures in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(7).”.

7.  In regulation 18 of the Measuring Equipment (Liquid Fuel and Lubricants) Regulations 1995(9), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of measuring equipment for liquid fuel and lubricants or is a laboratory which has been accredited for the purposes of testing measuring equipment for liquid fuel and lubricants in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(7).”.

8.  In regulation 8 of the Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations 2000(10), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of filling instruments or is a laboratory which has been accredited for the purposes of testing filling instruments in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(7).”.

9.  In regulation 36 (1) of the Weighing Equipment (Non-automatic Weighing Machines) Regulations 2000(11), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of non-automatic weighing machines or is a laboratory which has been accredited for the purposes of testing non-automatic weighing machines in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(7).”.

10.  In regulation 14 of the Weighing Equipment (Beltweighers) Regulations 2001(12), for paragraph (3) there shall be substituted the following paragraph:—

“(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of beltweighers or is a laboratory which has been accredited for the purposes of testing beltweighers in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000(7).”.

(1)

S.I. 1983/1390; the relevant amending instrument is S.I. 1995/3117.

(2)

BS EN ISO/IEC 17025:2000 is the international standard “General requirements for the competence of testing and calibration laboratories” (ISBN 0 580 34929 2).

(3)

S.I. 1986/1320; the relevant amending instruments are S.I. 1996/797 and S.I. 2000/387.

(4)

S.I. 1986/1682; the relevant amending instrument is S.I. 1996/2636.

(5)

S.I. 1988/120; the relevant amending instrument is S.I. 1993/2060.

(6)

S.I. 1988/997 as amended by S.I. 2001/1229.

(7)

BS EN ISO/IEC 17025:2000 is the international standard “General requirements for the competence of testing and calibration laboratories” (IBSN 0 580 34929 2).

(8)

S.I. 1995/735, to which there are amendments which are not relevant to these Regulations.

(9)

S.I. 1995/1014; the relevant amending instrument is S.I. 1998/2218.

(10)

S.I. 2000/388 to which there are amendments which are not relevant to these Regulations.

(11)

S.I. 2000/932 to which there are amendments which are not relevant to these Regulations.

(12)

S.I. 2001/1208.