- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
4.—(1) Part 20 of Schedule 2 (permitted development rights - construction of new dwellinghouses)(1) is amended as follows.
(2) In Class A (new dwellinghouses on detached blocks of flats)—
(a)in sub-paragraph (c) of paragraph A (permitted development), for “access and egress to” substitute “access to and egress from”;
(b)in paragraph A.1 (development not permitted)—
(i)for sub-paragraph (e) substitute—
“(e)the floor to ceiling height of any additional storey, measured internally, would exceed the lower of—
(i)3 metres; or
(ii)the floor to ceiling height, measured internally, of any storey of the principal part of the existing building;”;
(ii)for sub-paragraph (g) substitute—
“(g)the height of the highest part of the roof of the extended building would exceed the height of the highest part of the roof of the existing building by more than 7 metres (not including plant, in each case);”;
(iii)for sub-paragraph (h) substitute—
“(h)the height of the highest part of the roof of the extended building (not including plant) would be greater than 30 metres;”;
(iv)in sub-paragraph (l), for “new building” substitute “extended building”.
(3) After Class A insert—
AA.—(1) Development consisting of works for the construction of up to two additional storeys of new dwellinghouses immediately above the topmost storey on a detached building to which sub-paragraph (2) applies, together with any or all—
(a)engineering operations reasonably necessary to construct the additional storeys and new dwellinghouses;
(b)works for the replacement of existing plant or installation of additional plant on the roof of the extended building reasonably necessary to service the new dwellinghouses;
(c)works for the construction of appropriate and safe access to and egress from the new dwellinghouses and existing premises in the building, including means of escape from fire, via additional external doors or external staircases;
(d)works for the construction of storage, waste or other ancillary facilities reasonably necessary to support the new dwellinghouses.
(2) This sub-paragraph applies to a building which is—
(a)used for any purpose within Class A1 (shops), Class A2 (financial and professional services), Class A3 (restaurants and cafes) or Class B1(a) (offices) of the Schedule to the Use Classes Order, or as a betting office, pay day loan shop or launderette;
(b)in a mixed use combining—
(i)two or more uses within paragraph (a); or
(ii)a use falling within Class C3 (dwellinghouses) of the Schedule to the Use Classes Order, together with one or more uses within paragraph (a).
AA.1. Development is not permitted by Class AA if—
(a)above ground level, the building is less than three storeys in height;
(b)the building was constructed before 1st July 1948 or after 5th March 2018;
(c)on 5th March 2018 the building was in a use other than—
(i)a use or mixed use within paragraph AA(2)(a) or (b); or
(ii)a use falling within Class C3 of the Schedule to the Use Classes Order;
(d)the additional storeys are constructed other than on the principal part of the building;
(e)the floor to ceiling height of any additional storey, measured internally, would exceed the lower of—
(i)3 metres; or
(ii)the floor to ceiling height, measured internally, of any storey of the principal part of the existing building;
(f)the new dwellinghouses are not flats;
(g)the height of the highest part of the roof of the extended building would exceed the height of the highest part of the roof of the existing building by more than 7 metres (not including plant, in each case);
(h)the height of the highest part of the roof of the extended building (not including plant) would be greater than 30 metres;
(i)development under Class AA(1)(a) would include the provision of visible support structures on or attached to the exterior of the building upon completion of the development;
(j)development under Class AA(1)(a) would consist of engineering operations other than works within the existing curtilage of the building to—
(i)strengthen existing walls;
(ii)strengthen existing foundations; or
(iii)install or replace water, drainage, electricity, gas or other services;
(k)in the case of Class AA(1)(b) development there is no existing plant on the building;
(l)in the case of Class AA(1)(b) development the height of any replaced or additional plant as measured from the lowest surface of the new roof on the principal part of the extended building would exceed the height of any existing plant as measured from the lowest surface of the existing roof on the principal part of the existing building;
(m)development under Class AA(1)(c) would extend beyond the curtilage of the existing building;
(n)development under Class AA(1)(d) would—
(i)extend beyond the curtilage of the existing building;
(ii)be situated on land forward of a wall forming the principal elevation of the existing building; or
(iii)be situated on land forward of a wall fronting a highway and forming a side elevation of the existing building; or
(o)the land or site on which the building is located, is or forms part of—
(i)article 2(3) land;
(ii)a site of special scientific interest;
(iii)a listed building or land within its curtilage;
(iv)a scheduled monument or land within its curtilage;
(v)a safety hazard area;
(vi)a military explosives storage area; or
(vii)land within 3 kilometres of the perimeter of an aerodrome.
AA.2.—(1) Where any development under Class AA is proposed, development is permitted subject to the condition that before beginning the development, the developer must apply to the local planning authority for prior approval of the authority as to—
(a)transport and highways impacts of the development;
(b)air traffic and defence asset impacts of the development;
(c)contamination risks in relation to the building;
(d)flooding risks in relation to the building;
(e)the external appearance of the building, including—
(i)the design and architectural features of—
(aa)the principal elevation; and
(bb)any side elevation that fronts a highway; and
(ii)the impact of any works under sub-paragraph (1)(c) or (d) of Class AA;
(f)the provision of adequate natural light in all habitable rooms of the new dwellinghouses;
(g)impact on the amenity of the existing building and neighbouring premises including overlooking, privacy and the loss of light;
(h)impacts of noise from any commercial premises on the intended occupiers of the new dwellinghouses;
(i)impacts of the introduction of, or an increase in, a residential use of premises in the area on the carrying on of any trade, business or other use of land in the area;
(j)whether, because of the siting of the building, the development will impact on a protected view identified in the Directions Relating to Protected Vistas dated 15th March 2012(2) issued by the Secretary of State,
and the provisions of paragraph B (prior approval) of this Part apply in relation to that application.
(2) In sub-paragraph (1)(h), “commercial premises” means any premises in the building or the surrounding area which are normally used for the purpose of carrying on any trade or business, and includes any premises licensed under the Licensing Act 2003 or any other place of public entertainment.
(3) Any development under Class AA is permitted subject to the condition that it must be completed within a period of 3 years starting with the date prior approval is granted.
(4) Any development under Class AA is permitted subject to the condition that before beginning the development, the developer must provide the local planning authority with a report for the management of the construction of the development, which sets out the proposed development hours of operation and how any adverse impact of noise, dust, vibration and traffic on occupiers of the building and adjoining owners or occupiers will be mitigated.
(5) The developer must notify the local planning authority of the completion of the development as soon as reasonably practicable after completion.
(6) The notification referred to in sub-paragraph (5) must be in writing and must include—
(a)the name of the developer;
(b)the address or location of the development; and
(c)the date of completion.
(7) Following the development, every dwellinghouse in the building must remain in use as a dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order and for no other purpose, except to the extent that the other purpose is ancillary to the primary use as a dwellinghouse.
AB.—(1) Development consisting of works for the construction of new dwellinghouses immediately above the topmost storey on a terrace building to which sub-paragraph(2) applies, where that development comprises—
(a)up to two additional storeys, in the case of an existing building consisting of two or more storeys;
(b)one additional storey, in the case of an existing building consisting of one storey,
together with any development under sub-paragraph (3).
(2) This sub-paragraph applies to a building which is—
(a)used for any purpose within Class A1 (shops), Class A2 (financial and professional services), Class A3 (restaurants and cafes) or Class B1(a) (offices) of the Schedule to the Use Classes Order, or as a betting office, pay day loan shop or launderette;
(b)in a mixed use combining—
(i)two or more uses within paragraph (a); or
(ii)a use falling within Class C3 (dwellinghouses) of the Schedule to the Use Classes Order, together with one or more uses within paragraph (a).
(3) Development consisting of any or all—
(a)engineering operations reasonably necessary to construct the additional storeys and new dwellinghouses;
(b)works for the replacement of existing plant or installation of additional plant on the roof of the extended building reasonably necessary to service the new dwellinghouses;
(c)works for the construction of appropriate and safe access to and egress from the new dwellinghouses and existing premises, including means of escape from fire, via additional external doors or external staircases;
(d)works for the construction of storage, waste or other ancillary facilities reasonably necessary to support the new dwellinghouses.
AB.1. Development is not permitted by Class AB if—
(a)the building was constructed before 1st July 1948 or after 5th March 2018;
(b)on 5th March 2018 the building was in a use other than—
(i)a use or mixed use within paragraph AB(2)(a) or (b); or
(ii)a use falling within Class C3 of the Schedule to the Use Classes Order;
(c)the additional storeys are constructed other than on the principal part of the building;
(d)the floor to ceiling height of any additional storey, measured internally, would exceed the lower of—
(i)3 metres; or
(ii)the floor to ceiling height, measured internally, of any storey of the principal part of the existing building;
(e)the new dwellinghouses are not flats;
(f)the height of the highest part of the roof of the extended building (not including plant) would be greater than 18 metres;
(g)the height of the highest part of the roof of the extended building would exceed by more than 3.5 metres the height of the highest part of the roof of every other building in the row of terrace buildings of which it forms part (not including plant, in each case);
(h)the height of the highest part of the roof of the extended building would exceed the height of the highest part of the roof of the existing building (not including plant, in each case) by more than—
(i)3.5 metres, where the existing building consists of one storey; or
(ii)7 metres, where the existing building consists of more than one storey;
(i)the existing building has been enlarged by the addition of one or more storeys above the original building, whether in reliance on permission granted under this Part or otherwise;
(j)development under Class AB(3)(a) would include the provision of visible support structures on or attached to the exterior of the building upon completion of the development;
(k)development under Class AB(3)(a) would consist of engineering operations other than works within the existing curtilage of the building to—
(i)strengthen existing walls;
(ii)strengthen existing foundations; or
(iii)install or replace water, drainage, electricity, gas or other services;
(l)in the case of Class AB(3)(b) development there is no existing plant on the building;
(m)in the case of Class AB(3)(b) development the height of any replaced or additional plant as measured from the lowest surface of the new roof on the principal part of the extended building would exceed the height of any existing plant as measured from the lowest surface of the existing roof on the principal part of the existing building;
(n)development under Class AB(3)(c) would extend beyond the curtilage of the existing building;
(o)development under Class AB(3)(d) would—
(i)extend beyond the curtilage of the existing building;
(ii)be situated on land forward of a wall forming the principal elevation of the existing building; or
(iii)be situated on land forward of a wall fronting a highway and forming a side elevation of the existing building; or
(p)the land or site on which the building is located, is or forms part of—
(i)article 2(3) land;
(ii)a site of special scientific interest;
(iii)a listed building or land within its curtilage;
(iv)a scheduled monument or land within its curtilage;
(v)a safety hazard area;
(vi)a military explosives storage area; or
(vii)land within 3 kilometres of the perimeter of an aerodrome.
AB.2.—(1) Where any development under Class AB is proposed, development is permitted subject to the condition that before beginning the development, the developer must apply to the local planning authority for prior approval of the authority as to—
(a)transport and highways impacts of the development;
(b)air traffic and defence asset impacts of the development;
(c)contamination risks in relation to the building;
(d)flooding risks in relation to the building;
(e)the external appearance of the building, including—
(i)the design and architectural features of —
(aa)the principal elevation; and
(bb)any side elevation that fronts a highway; and
(ii)the impact of any works under paragraph AB(3)(c) or (d);
(f)the provision of adequate natural light in all habitable rooms of the new dwellinghouses;
(g)impact on the amenity of the existing building and neighbouring premises including overlooking, privacy and the loss of light;
(h)impacts of noise from any commercial premises on the intended occupiers of the new dwellinghouses;
(i)impacts of the introduction of, or an increase in, a residential use of premises in the area on the carrying on of any trade, business or other use of land in the area;
(j)whether, because of the siting of the building, the development will impact on a protected view identified in the Directions Relating to Protected Vistas dated 15th March 2012(3) issued by the Secretary of State,
and the provisions of paragraph B (prior approval) of this Part apply in relation to that application.
(2) In sub-paragraph (1)(h), “commercial premises” means any premises in the building or the surrounding area which are normally used for the purpose of carrying on any trade or business, and includes any premises licensed under the Licensing Act 2003 or any other place of public entertainment..
(3) Any development under Class AB is permitted subject to the condition that the development must not include a window in any wall or roof slope forming a side elevation of the building.
(4) Any development under Class AB is permitted subject to the condition that it must be completed within a period of 3 years starting with the date prior approval is granted.
(5) Any development under Class AB is permitted subject to the condition that before beginning the development, the developer must provide the local planning authority with a report for the management of the construction of the development, which sets out the proposed development hours of operation and how any adverse impact of noise, dust, vibration and traffic on occupiers of the building and adjoining owners or occupiers will be mitigated.
(6) The developer must notify the local planning authority of the completion of the development as soon as reasonably practicable after completion.
(7) The notification referred to in sub-paragraph (6) must be in writing and must include—
(a)the name of the developer;
(b)the address or location of the development; and
(c)the date of completion.
(8) Following the development, every dwellinghouse in the building must remain in use as a dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order and for no other purpose, except to the extent that the other purpose is ancillary to the primary use as a dwellinghouse.
AC.—(1) Development consisting of works for the construction of new dwellinghouses immediately above the topmost storey on a terrace building in use as a single dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order, where the development comprises—
(a)up to two additional storeys, in the case of an existing dwellinghouse consisting of two or more storeys;
(b)one additional storey, in the case of an existing dwellinghouse consisting of one storey,
together with any development under sub-paragraph (2).
(2) Development consisting of any or all—
(a)engineering operations reasonably necessary to construct the additional storeys and new dwellinghouses;
(b)works for the construction of appropriate and safe access to and egress from the new and existing dwellinghouses, including means of escape from fire, via additional external doors or external staircases;
(c)works for the construction of storage, waste or other ancillary facilities reasonably necessary to support the new dwellinghouses.
AC.1. Development is not permitted by Class AC if—
(a)the building was constructed before 1st July 1948 or after 5th March 2018;
(b)on 5th March 2018 the building was in a use other than—
(i)a use falling within Class C3 (dwellinghouses) of the Schedule to the Use Classes Order; or
(ii)a use or mixed use within paragraph AA(2)(a) or (b) of this Part;
(c)the additional storeys are constructed other than on the principal part of the dwellinghouse;
(d)the floor to ceiling height of any additional storey, measured internally, would exceed the lower of—
(i)3 metres; or
(ii)the floor to ceiling height, measured internally, of any storey of the principal part of the existing dwellinghouse;
(e)the new dwellinghouses are not flats;
(f)the height of the highest part of the roof of the extended building would be greater than 18 metres;
(g)the height of the highest part of the roof of the extended building would exceed by more than 3.5 metres the height of the highest part of the roof of every other building in the row of terrace buildings of which it forms part;
(h)the height of the highest part of the roof of the extended building would exceed the height of the highest part of the roof of the existing dwellinghouse by more than—
(i)3.5 metres, where the existing dwellinghouse consists of one storey; or
(ii)7 metres, where the existing dwellinghouse consists of more than one storey;
(i)the existing dwellinghouse has been enlarged by the addition of one or more storeys above the original dwellinghouse, whether in reliance on permission granted under Class AA of Part 1 or otherwise;
(j)development under Class AC(2)(a) would include the provision of visible support structures on or attached to the exterior of the building upon completion of the development;
(k)development under Class AC(2)(a) would consist of engineering operations other than works within the existing curtilage of the dwellinghouse to—
(i)strengthen existing walls;
(ii)strengthen existing foundations; or
(iii)install or replace water, drainage, electricity, gas or other services;
(l)development under Class AC(2)(b) would extend beyond the curtilage of the existing dwellinghouse;
(m)development under Class AC(2)(c) would—
(i)extend beyond the curtilage of the existing dwellinghouse;
(ii)be situated on land forward of a wall forming the principal elevation of the existing dwellinghouse; or
(iii)be situated on land forward of a wall fronting a highway and forming a side elevation of the existing dwellinghouse; or
(n)the land or site on which the dwellinghouse is located, is or forms part of—
(i)article 2(3) land;
(ii)a site of special scientific interest;
(iii)a listed building or land within its curtilage;
(iv)a scheduled monument or land within its curtilage;
(v)a safety hazard area;
(vi)a military explosives storage area; or
(vii)land within 3 kilometres of the perimeter of an aerodrome.
AC.2.—(1) Where any development under Class AC is proposed, development is permitted subject to the condition that before beginning the development, the developer must apply to the local planning authority for prior approval of the authority as to—
(a)transport and highways impacts of the development;
(b)air traffic and defence asset impacts of the development;
(c)contamination risks in relation to the building;
(d)flooding risks in relation to the building;
(e)the external appearance of the building, including—
(i)the design and architectural features of—
(aa)the principal elevation; and
(bb)any side elevation that fronts a highway; and
(ii)the impact of any works under paragraph AC(2)(b) or (c);
(f)the provision of adequate natural light in all habitable rooms of the new dwellinghouses;
(g)impact on the amenity of the neighbouring premises including overlooking, privacy and the loss of light;
(h)whether, because of the siting of the building, the development will impact on a protected view identified in the Directions Relating to Protected Vistas dated 15th March 2012(4) issued by the Secretary of State,
and the provisions of paragraph B (prior approval) of this Part apply in relation to that application.
(2) Any development under Class AC is permitted subject to the following conditions—
(a)the materials used in any exterior work must be of a similar appearance to those used in the construction of the exterior of the existing dwellinghouse;
(b)following the development, the roof pitch of the principal part of the building must be the same as the roof pitch of the principal part of the existing dwellinghouse; and
(c)the development must not include a window in any wall or roof slope forming a side elevation of the dwellinghouse.
(3) Any development under Class AC is permitted subject to the condition that it must be completed within a period of 3 years starting with the date prior approval is granted.
(4) Any development under Class AC is permitted subject to the condition that before beginning the development, the developer must provide the local planning authority with a report for the management of the construction of the development, which sets out the proposed development hours of operation and how any adverse impact of noise, dust, vibration and traffic on occupiers of the building and adjoining owners or occupiers will be mitigated.
(5) The developer must notify the local planning authority of the completion of the development as soon as reasonably practicable after completion.
(6) The notification referred to in sub-paragraph (5) must be in writing and must include—
(a)the name of the developer;
(b)the address or location of the development; and
(c)the date of completion.
(7) Following the development, every dwellinghouse in the building must remain in use as a dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order and for no other purpose, except to the extent that the other purpose is ancillary to the primary use as a dwellinghouse.
AD.—(1) Development consisting of works for the construction of new dwellinghouses immediately above the topmost storey on a detached building in use as a single dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order, where the development comprises—
(a)up to two additional storeys, in the case of an existing dwellinghouse consisting of two or more storeys;
(b)one additional storey, in the case of an existing dwellinghouse consisting of one storey,
together with any development under sub‑paragraph (2).
(2) Development consisting of any or all—
(a)engineering operations reasonably necessary to construct the additional storeys and new dwellinghouses;
(b)works for the construction of appropriate and safe access to and egress from the new and existing dwellinghouses, including means of escape from fire, via additional external doors or external staircases;
(c)works for the construction of storage, waste or other ancillary facilities reasonably necessary to support the new dwellinghouses.
AD.1. Development is not permitted by Class AD if—
(a)the building was constructed before 1st July 1948 or after 5th March 2018;
(b)on 5th March 2018 the building was in a use other than—
(i)a use falling within Class C3 (dwellinghouses) of the Schedule to the Use Classes Order; or
(ii)a use or mixed use within paragraph AA(2)(a) or (b) of this Part;
(c)the additional storeys are constructed other than on the principal part of the dwellinghouse;
(d)the floor to ceiling height of any additional storey, measured internally, would exceed the lower of—
(i)3 metres; or
(ii)the floor to ceiling height, measured internally, of any storey of the principal part of the existing dwellinghouse;
(f)the new dwellinghouses are not flats;
(g)the height of the highest part of the roof of the extended building would be greater than 18 metres;
(h)the height of the highest part of the roof of the extended building would exceed the height of the highest part of the roof of the existing dwellinghouse by more than—
(i)3.5 metres, where the existing dwellinghouse consists of one storey; or
(ii)7 metres, where the existing dwellinghouse consists of more than one storey;
(i)the existing dwellinghouse has been enlarged by the addition of one or more storeys above the original building, whether in reliance on permission granted under Class AA of Part 1, or otherwise;
(j)development under Class AD(2)(a) would include the provision of visible support structures on or attached to the exterior of the building upon completion of the development;
(k)development under Class AD(2)(a) would consist of engineering operations other than works within the existing curtilage of the dwellinghouse to—
(i)strengthen existing walls;
(ii)strengthen existing foundations; or
(iii)install or replace water, drainage, electricity, gas or other services;
(l)development under Class AD(2)(b) would extend beyond the curtilage of the existing dwellinghouse;
(m)development under Class AD(2)(c) would—
(i)extend beyond the curtilage of the existing dwellinghouse;
(ii)be situated on land forward of a wall forming the principal elevation of the existing dwellinghouse; or
(iii)be situated on land forward of a wall fronting a highway and forming a side elevation of the existing dwellinghouse; or
(n)the land or site on which the dwellinghouse is located, is or forms part of—
(i)article 2(3) land;
(ii)a site of special scientific interest;
(iii)a listed building or land within its curtilage;
(iv)a scheduled monument or land within its curtilage;
(v)a safety hazard area;
(vi)a military explosives storage area; or
(vii)land within 3 kilometres of the perimeter of an aerodrome.
AD.2.—(1) Where any development under Class AD is proposed, development is permitted subject to the condition that before beginning the development, the developer must apply to the local planning authority for prior approval of the authority as to—
(a)transport and highways impacts of the development;
(b)air traffic and defence asset impacts of the development;
(c)contamination risks in relation to the building;
(d)flooding risks in relation to the building;
(e)the external appearance of the building, including—
(i)the design and architectural features of —
(aa)the principal elevation; and
(bb)any side elevation that fronts a highway; and
(ii)including the impact of any works under paragraph AD(2)(b) or (c);
(f)the provision of adequate natural light in all habitable rooms of the new dwellinghouses;
(g)impact on the amenity of the neighbouring premises including overlooking, privacy and the loss of light;
(h)whether, because of the siting of the building, the development will impact on a protected view identified in the Directions Relating to Protected Vistas dated 15th March 2012(5) issued by the Secretary of State,
and the provisions of paragraph B (prior approval) of this Part apply in relation to that application.
(2) Any development under Class AD is permitted subject to the following conditions—
(a)the materials used in any exterior work must be of a similar appearance to those used in the construction of the exterior of the existing dwellinghouse;
(b)following the development, the roof pitch of the principal part of the building must be the same as the roof pitch of the principal part of the existing dwellinghouse; and
(c)the development must not include a window in any wall or roof slope forming a side elevation of the building.
(3) Any development under Class AD is permitted subject to the condition that it must be completed within a period of 3 years starting with the date prior approval is granted.
(4) The developer must notify the local planning authority of the completion of the development as soon as reasonably practicable after completion.
(5) The notification referred to in sub-paragraph (4) must be in writing and must include—
(a)the name of the developer;
(b)the address or location of the development; and
(c)the date of completion.
(6) Following the development, every dwellinghouse in the building must remain in use as a dwellinghouse within the meaning of Class C3 of the Schedule to the Use Classes Order and for no other purpose, except to the extent that the other purpose is ancillary to the primary use as a dwellinghouse.”.
(4) In paragraph B (procedure for applications for prior approval under Part 20)—
(a)in sub-paragraph (2)(a)—
(i)for “Class A” substitute “any of Classes A to AD”;
(ii)for “paragraphs A.(a) to (d)” substitute “paragraph A(a) to (d), AA(1)(a) to (d), AB(3)(a) to (d), AC(2)(a) to (c), or AD(2)(a) to (c) (as the case may be)”;
(b)in sub-paragraph (2)(d), for the words from “that” to the end, substitute “(that is, additional to any dwellinghouses in the existing building)”;
(c)in sub-paragraph (2)(e), for the words from “the flats” to the end, substitute “any flats and any other premises in the existing building”;
(d)in sub-paragraph (12)(b), for “the flats within existing block of flats” substitute “any flats and any other premises within the existing building”.
(5) In paragraph C (interpretation of Part 20)—
(a)at the end of the definition of “purpose-built” omit “and”;
(b)after that definition insert—
““row”, in relation to a terrace building, means the row of two or more terrace buildings of which it forms part, where each building in the row—
shares a party wall with, or has a main wall adjoining the main wall of, the building on either side; or
if it is the end of a row—
in the case of a row comprising more than two buildings, it shares a party wall with, or has a main wall adjoining the main wall of, a building which fulfils the requirements of paragraph (a); or
in the case of a row comprising only two buildings, it shares a party wall with, or has a main wall adjoining the main wall of, the other building in the row;”;
(c)in the definition of “technical sites” omit “Annexe 1 of”;
(d)after the definition of “technical sites” insert—
““terrace building” means a building which is not detached.”;
(e)the existing text becomes sub-paragraph (1), and after that sub-paragraph insert—
“(2) In Part 20 references to a “storey” do not include—
(a)any storey below ground level; or
(b)any accommodation within the roof of a building, whether comprising part of the original building or created by a subsequent addition or alteration,
and accordingly, references to an “additional storey” include a storey constructed in reliance on the permission granted by this Part which replaces accommodation within the roof of the existing building.”.
Part 20 of Schedule 2 was inserted by S.I. 2020/632.
https://www.london.gov.uk/what-we-do/planning/implementing-london-plan/planning-guidance/london-view-management a copy of which may be inspected at the Planning Directorate, the Ministry of Housing, Communities and Local Government, 2 Marsham Street, London, Sw1P 4DF.
https://www.london.gov.uk/what-we-do/planning/implementing-london-plan/planning-guidance/london-view-management a copy of which may be inspected at the Planning Directorate, the Ministry of Housing, Communities and Local Government, 2 Marsham Street, London, Sw1P 4DF.
https://www.london.gov.uk/what-we-do/planning/implementing-london-plan/planning-guidance/london-view-management a copy of which may be inspected at the Planning Directorate, the Ministry of Housing, Communities and Local Government, 2 Marsham Street, London, Sw1P 4DF.
https://www.london.gov.uk/what-we-do/planning/implementing-london-plan/planning-guidance/london-view-management a copy of which may be inspected at the Planning Directorate, the Ministry of Housing, Communities and Local Government, 2 Marsham Street, London, Sw1P 4DF.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: