Part II Construction, Equipment and Maintenance of Vehicles
A — Dimensions and Manoeuvrability
10.Warning devices where certain high level equipment is fitted to a vehicle
16.Turning circle — articulated vehicles other than those incorporating a car transporter
17.Turning circle — articulated vehicles incorporating a car transporter
19.Connecting sections and direction-holding of articulated buses
66.Noise limits — certain vehicles with 3 or more wheels — general
67.Noise limits — certain vehicles first used on or after 28th June 1999 — general
68.Noise limits — agricultural motor vehicles and industrial tractors
69.Noise limits — construction requirements relating to motor cycles
71.Noise limits — maintenance requirements relating to motor cycles
Part III Plates, Markings, Testing and Inspection
Part IV Conditions Relating to Use
D — Use of Motor Vehicles for the Carriage or Haulage of Dangerous Goods
1.The Department may authorise a person proposing to seal limiters...
2.An authorised sealer shall comply with the conditions set out...
3.An authorised sealer may charge for sealing a speed limiter....
4.The Department may at any time withdraw an authorisation granted...
5.(1) An authorisation under this Schedule in respect of an...
Construction Requirements of Minibuses
Fire Extinguishing Apparatus and First Aid Equipment for Minibuses
Part I Modificationof Regulations 67 and 74 in Relation to End of Series Vehicles
Part II Meaning of “Type Approval End of Series Vehicle” in Part I
2.Meaning of “type approval end of series vehicle” for the purposes of paragraph 1
3.Meaning of “relevant vehicle” for the purposes of this Part
4.Meaning of “specified number” for the purposes of this Part
5.Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for the purposes of this Part
6.Meaning of “relevant period” for the purposes of this Part
Part III Meaning of “Non-Type Approval End of Series Vehicle” in Part I
7.Meaning of “non-type approval end of series vehicle” in paragraph 1
8.Meaning of “relevant vehicle” for the purposes of this Part
9.Meaning of “specified number” for the purposes of this Part
10.Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for the purposes of this Part
11.Meaning of “relevant period” for the purposes of this Part
Part IV Meaning of “Late Entry into Service Vehicle” in Part I
Motor cycle noise and motor cycle silencers
1.The plate required by regulation 82(2) shall be firmly attached...
3.The vehicle identification number (VIN) shall be marked in the...
5.The information on the plate shall be shown in characters...
6.No information, other than that provided for in the diagram,...
7.In this Schedule— “maximum engine power” means the maximum net...
8.A motor cycle shall be regarded as complying with paragraph...
Exemptions relating to combined transport operations
Exclusion of certain vehicles from the application of regulation 47