- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulation 10(3)
(Principle from Clause 2.3 of OIML R51)
The maximum permissible error for any load equal to or greater than the minimum capacity (Min) and equal to or less than the maximum capacity (Max) in automatic operation shall be as specified in Table 1. (Note that the mpe-value includes the digital rounding error of the indicating device.)
Load (m) expressed in verification scale intervals (e) | Maximum permissible error for class Y(y) instruments | ||
---|---|---|---|
Class Y(a) | Class Y(b) | Initial verification | In-service |
0 <m ≤ 500 | 0 <m ≤50 | ±1.5 e | ±2 e |
500 <m ≤ 2,000 | 50 <m ≤ 200 | ±2 e | ±3 e |
2,000 <m ≤ 10,000 | 200 <m ≤ 1,000 | ±2.5 e | ±4 e |
(Principle from Clause 2.5.2 of OIML R51)
The maximum permissible error for any load equal to or greater than the minimum capacity (Min) and equal to or less than the maximum capacity (Max) for static weighing in non-automatic operation shall be as specified in Table 2.
Load (m) expressed in verification scale intervals (e) | Maximum permissible error for class Y(y) instruments | ||
---|---|---|---|
Class Y(a) | Class Y(b) | Initial verification | In-service |
0 <m ≤ 500 | 0 <m ≤ 50 | ±0.5 e | ±1 e |
500 <m ≤ 2,000 | 50 <m ≤ 200 | ±1 e | ±2 e |
2,000 <m ≤ 10,000 | 200 <m ≤ 1,000 | ±1.5 e | ±3 e |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: