- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Weighing Equipment (Beltweighers) Regulations (Northern Ireland) 2006, Section 9.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
9.—(1) Every beltweigher shall be erected—
(a)in such a way that it is possible to carry out a material test in situ in accordance with clause A. 11 of Annex A to R 50-1, including in particular the depositing on or removal from the belt of material test loads in a reliable and easy manner, without disrupting the normal operation of the beltweigher; and
(b)in conformity with the following installation conditions contained in R 50-1, that is to say, those set out in clauses 3.8 to 3.10 relating to the installation, to the roller track, to the conveyor belt, to speed control, to weigh length, to belt tension, to overload protection, to ancillary devices and to sealing.
(2) A person shall not use a beltweigher for trade unless there is sited in the vicinity of the beltweigher and available for use in conjunction with the beltweigher a suitable control instrument, that is to say, a weighing instrument which is of Class III or better.
(3) The suitable control instrument referred to in paragraph (2) must—
(a)comply with the Measuring Instruments (EEC Requirements) Regulations 1988 and bear the mark of EEC initial verification as described in Schedule 1 to those Regulations; or
(b)comply with the Non-automatic Weighing Instruments Regulations 2000 (1) and bear the appropriate sticker as defined in regulation 2(2) of those Regulations; or
(c)have been passed as fit for use for trade under the Weighing Equipment (Non-automatic Weighing Machines) Regulations (Northern Ireland) 2006(2) and bear the stamp as defined in regulation 2(1) of those Regulations; or
(d)have been passed as fit for use for trade under the Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) Regulations (Northern Ireland) 1986(3); or
(e)have been passed as fit for use for trade under the Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations (Northern Ireland) 2005(4); or
(f)have been passed as fit for use for trade under these Regulations; and
be capable of determining the weight of material used in material testing and giving weight determinations such that in respect of each material test load the weight determination shall in total be accurate to within one-fifth of the limits of error prescribed for material testing whether such a load is determined in one or more weighing operations.
S.I. 2000/3236
S.R. 1986 No. 311 as amended by S.R. 1995 No. 228, S.R. 1998 No. 374, S.R. 2002 No.71 and S.R. 2004 No.189
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: