- Latest available (Revised)
- Point in Time (30/06/2006)
- Original (As made)
The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 2006
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Changes over time for: PART 2
Version Superseded: 19/11/2006
Alternative versions:
- 30/06/2006- Amendment
- 30/06/2006
Point in time - 19/11/2006- Amendment
Status:
Point in time view as at 30/06/2006.
Changes to legislation:
There are currently no known outstanding effects for the The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 2006, PART 2.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
PART 2N.I.Food Simulants to be Used in Migration Testing
5. Subject to Parts 3, 4, 5 and 7, the simulants to be used in migration testing are specified in the Table to this paragraph (referred to in this Part as “the Table”).N.I.
1 Abbreviation | 2 Food Simulant |
|---|---|
| Simulant A: | Distilled water or water of equivalent quality |
| Simulant B: | 3% Acetic acid (w/v) in aqueous solution |
| Simulant C: | 10% Ethanol (v/v) in aqueous solution save that the concentration of ethanol solution shall be adjusted to the actual alcoholic strength of the food if it exceeds 10% (v/v) |
| Simulant D: | Rectified olive oil having the characteristics specified in paragraph 3 of this Part of this Schedule or, subject to paragraph 5 of this Part of this Schedule, any of the fatty food simulants specified in paragraph 4 of this Part of this Schedule |
Commencement Information
I1Sch. 6 para. 5 in operation at 30.6.2006, see reg. 1
6. For the purposes of this Schedule a reference to an abbreviation in column 1 of the Table shall mean a reference to the simulant in column 1 of that Table opposite that abbreviation.N.I.
Commencement Information
I2Sch. 6 para. 6 in operation at 30.6.2006, see reg. 1
7. The characteristics of rectified olive oil referred to in the Table are —N.I.
(a)Iodine value (Wijs) = 80 to 88
(b)Refractive index at 25°C = 1.4665 to 1.4679
(c)Acidity (expressed as % of oleic acid) = 0.5% maximum
(d)Peroxide number (expressed as oxygen milli-equivalents per kg of oil) = 10 maximum
Commencement Information
I3Sch. 6 para. 7 in operation at 30.6.2006, see reg. 1
8. The fatty food simulants referred to in the Table are —N.I.
(a)corn oil with standardised specifications;
(b)sunflower oil, the characteristics of which are —
(i)Iodine value (Wijs) = 120 to 145
(ii)Refractive index at 20°C = 1.474 to 1.476
(iii)Saponification number = 188 to 193
(iv)Relative density at 20°C = 0.918 to 0.925
(v)Unsaponifiable matter = 0.5% to 1.5%.
(c)a synthetic mixture of triglycerides the composition of which is as set out in the following tables:
Fatty acid distribution
| No of C-atoms in fatty acid residue | 6 | 8 | 10 | 12 | 14 | 16 | 18 | others |
|---|---|---|---|---|---|---|---|---|
| GLC area (%) | ~1 | 6-9 | 8-11 | 45-52 | 12-15 | 8-10 | 8-12 | 1 |
Purity
| Content of monoglycerides (enzymatically) | ≤0.2% |
| Content of diglycerides (enzymatically) | ≤2.0% |
| Unsaponifiable matter | ≤0.2% |
Iodine value (Wijs) | ≤0.1% |
| Acid value | ≤0.1% |
| Water content (K Fischer) | ≤0.1% |
| Melting point | 28 ± 2°C |
Typical absorption spectrum (thickness of layer: d = 1 cm; Reference: water at 35°C)
| Wavelength (nm) | 290 | 310 | 330 | 350 | 370 | 390 | 430 | 470 | 510 |
| Transmittance (%) | ~2 | ~15 | ~37 | ~64 | ~80 | ~88 | ~95 | ~97 | ~98 |
| At least 10% light transmittance at 310 nm | |||||||||
Commencement Information
I4Sch. 6 para. 8 in operation at 30.6.2006, see reg. 1
9. Where fatty food simulant specified in paragraph 4 is used in migration testing and the result of that test shows that a plastic material or article does not comply with any migration limit specified in regulation 9 or Schedule 1, verification that the plastic material or article does not comply with the specified migration shall be carried out by testing that material or article using olive oil if such testing is technically feasible, and if such testing is not technically feasible the plastic material or article shall be deemed not to comply with the specified migration limit.N.I.
Commencement Information
I5Sch. 6 para. 9 in operation at 30.6.2006, see reg. 1
Options/Help
Print Options
PrintThe Whole Rule
PrintThe Whole Schedule
PrintThis Part only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.