The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 2006

PART 3 N.I. Selection of Food Simulants

Testing, reduction factors and definition of food types N.I.

10.  The testing of plastic materials and articles shall be carried out under the test conditions specified in Part 5 using a simulant or simulants selected in accordance with this Part and taking a new test specimen of the plastic material or article for each simulant used.

Commencement Information

I1 Sch. 6 para. 10 in operation at 30.6.2006, see reg. 1

11.—(1) Where a test is carried out on a plastic material or article intended to come into contact with more than one food or group of foods and a reduction factor is specified for one or more of those foods or groups of foods which is not equivalent to the reduction factor specified for one or more of the other foods or groups of foods with which the plastic material or article is intended to come into contact—

(a) the reduction factor specified for each food or group of foods, as appropriate, shall be applied to the test result; and

(b) the plastic material or article shall be treated as being capable of transferring its constituents to food with which it may come into contact in excess of a migration limit specified in regulation 9 or Schedule 1 if, following application of those specified reduction factors, one or more of the results show that the material or article does not comply with that specified migration limit.

(2) For the purpose of this paragraph —

(a) a reduction factor is the figure which follows an “X” and oblique stroke in the group of columns headed “Simulants to be used” in the Table to Part 4;

(b) a reduction factor is specified for a food or group of foods where, in the Table to Part 4 —

(i) the food or group of foods is described in the column headed “Description of food”, and

(ii) “X” is placed in a column headed by a specified simulant opposite that food or group of foods followed by an oblique stroke and a reduction factor;

(c) a reduction factor shall be applied to a test result by dividing the result by that reduction factor.

Commencement Information

I2 Sch. 6 para. 11 in operation at 30.6.2006, see reg. 1

12.  Food types are defined in Table 1 below as follows —

Table 1: Food types

Definition	Meaning
Aqueous foods having a pH > 4.5	Foods in relation to which simulant A only is specified in the Table to Part 4
Acidic foods having a pH ≤ 4.5	Foods in relation to which simulant B only is specified in Table to Part 4
Alcoholic foods	Foods in relation to which simulant C only is specified in the Table to Part 4
Fatty foods	Foods in relation to which simulant D only is specified in the Table to Part 4
Dry Foods	Foods in relation to which no simulant is specified in the Table to Part 4

Commencement Information

I3 Sch. 6 para. 12 in operation at 30.6.2006, see reg. 1

Selection of simulants for testing materials and articles intended for contact with all food types N.I.

13.  The simulants to be used in testing a plastic material or article which is intended for contact with all food types are simulant B, simulant C and simulant D which, at the test conditions specified in Part 5, are considered to be more severe.

Commencement Information

I4 Sch. 6 para. 13 in operation at 30.6.2006, see reg. 1

Selection of simulants for testing materials and articles which are already in contact with a known food N.I.

14.  The simulant or simulants to be used in testing a plastic material or article which is already in contact with a known food shall be —

(a) where —

(i) the known food is a specific food or is within a specific group of foods described in column 2 of the Table to Part 4 and,

(ii) for the purposes of that Part, a simulant is, or simulants are, specified in relation to that specific food or specific group of foods,

the simulant or simulants so specified;

(b) where —

(i) the known food is neither a specific food, nor

(ii) within a specific group of foods described in the Table to Part 4 of this Schedule,

the simulant or simulants in column 2 of Table 2 opposite the description of food in column 1 of that Table which corresponds most closely to the known food.

Commencement Information

I5 Sch. 6 para. 14 in operation at 30.6.2006, see reg. 1

Selection of simulants for testing materials and articles which are accompanied by a specific indication N.I.

15.  The simulant or simulants to be used in testing a plastic material or article which, pursuant to Regulation (EC) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food(1) (“Regulation 1935/2004”), is accompanied by a specific indication stating any type or types of food described in Table 1 with which it may or may not be used shall be the simulant or simulants in column 2 of Table 2 opposite the contact food in column 1 of that Table which corresponds most closely to the type or types of food with which it may be used, as identified by the indication which accompanies the plastic material or article.

Commencement Information

I6 Sch. 6 para. 15 in operation at 30.6.2006, see reg. 1

16.  The simulant or simulants to be used in testing a plastic material or article which, pursuant to Regulation 1935/2004, is accompanied by a specific indication, expressed in accordance with paragraph 8, stating any food or group of foods described in the Table to Part 4 with which it may or may not be used shall be—

(a) where the indication states that the plastic material or article may be used with a food or group of foods described in column 2 of the Table to Part 4, the food simulant or food simulants which, for the purposes of Part 4, is or are specified in relation to that food or group of foods;

(b) where the indication states that the plastic material or article should not be used with any food or group of foods described in column 2 of Table to Part 4, a simulant other than the simulant or simulants which, for the purposes of Part 4, is or are specified in relation to that food or group of foods.

Commencement Information

I7 Sch. 6 para. 16 in operation at 30.6.2006, see reg. 1

17.  A specific indication referred to in paragraph 7 is expressed in accordance with this paragraph if it is expressed—

(a) at a marketing stage other than retail, by using the reference number in column 1 of the Table to Part 4 of these Regulations or the description of food in column 2 of that Table which, in either case, corresponds to the food;

(b) at the retail stage, by using an indication which refers to only a few foods or groups of foods described in the Table to Part 4.

Table 2: Simulants to be selected for testing food contact materials in special cases

Contact foods	Simulant
Only aqueous foods	Simulant A
Only acidic foods	Simulant B
Only alcoholic foods	Simulant C
Only fatty foods	Simulant D
All aqueous and acidic foods	Simulant B
All alcoholic and aqueous foods	Simulant C
All alcoholic and acidic foods	Simulant C and B
All fatty and aqueous foods	Simulants D and A
All fatty and acidic foods	Simulants D and B
All fatty, alcoholic and aqueous foods	Simulants D and C
All fatty, alcoholic and acidic foods	Simulants D, C and B

Commencement Information

I8 Sch. 6 para. 17 in operation at 30.6.2006, see reg. 1

(1)

OJ No. L338, 13.11.2004, p.4