
Print Options
PrintThe Whole
Rule
PrintThe Whole
Part
PrintThis
Section
only
Status:
This is the original version (as it was originally made).
Stamping
40.—(1) The stamp shall be placed on the plug, stud or plate and on every sealing device referred to in regulation 22.
(2) A non-automatic weighing machine shall not be stamped in accordance with paragraph (1) if it bears any mark which, in the opinion of the inspector, might reasonably be mistaken for the stamp, or any statement or mark (other than an inspector’s stamp) which purports to be or, in the opinion of the inspector, might reasonably be mistaken for an expression of approval or guarantee of accuracy by any body or person.
Back to top