- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
10. A machine made in accordance with an approved pattern and which is or could be marked
is a Class I machine.
11. The specifications for non-graduated and graduated Class I machines are given in Table 1.
Maximum capacity “Max” | Lower limit of the minimum load “Min” | Scale interval “d” | Number of scale intervals “n” | Verification scale interval “e” |
---|---|---|---|---|
Non-graduated machines | ||||
100 mg ≤ Max | 10 e | 0.1 mg | ||
≤ 1 g | ||||
1 g ≤ Max | 50 e | Max | ||
<10 g | ... ... ... ... | |||
10 000 | ||||
10 g ≤ Max | 50 e | 1 mg | ||
<100 g | ||||
100 g ≤ Max | 50 e | Max | ||
... ... ... ... | ||||
100 000 | ||||
Graduated machines | ||||
0.5 mg ≤ Max | d | d ≤ 0.005 mg | 10 ≤ n | d |
1 mg ≤ Max | 10 d | 0.01 mg ≤ d | 100 ≤ n | d |
≤ 0.05 mg | ||||
10 mg ≤ Max | 50 d | 0.1 mg ≤ d | 100 ≤ n | d |
≤ 0.5 mg | ||||
100 g ≤ Max | 50 d | 1 mg ≤ d | 100 000 ≤ n | d |
1. When a machine is provided with a rider its verification scale interval shall be the smaller of the following—
(i)the verification scale interval of the machine not taking into account the rider, or
(ii)the scale interval of the rider device.
2. When graduated machines of the self and semi-self indicating type are provided with a device for interpolation of reading, this shall not be taken into account when determining the verification scale interval of the machine.
3. When graduated machines of the self or semi-self indicating type are provided with an indicating device on which the last figure is clearly differentiated from the other figures, the verification scale interval shall correspond to the last but one figure of the indication.
4. In the case of machines where the weight indicating or printing is in carat (metric) units or ounces troy the relevant capacity and verification scale interval shall be the amounts in carat (metric) or ounces troy respectively which are equivalent to those specified in the Table in terms of mg, g and kg.
5. Where the equivalent metric value for an ounce troy scale interval falls between ranges then the value shall be considered as belonging to the lower range.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: