- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulations 2 and 4
Item | Parameters | Concentration or Value (maximum) | Units of measurement | Point of Compliance(*) |
---|---|---|---|---|
(*) Where water is supplied from a tanker see regulation 4(3)(a) | ||||
1. | Enterococci | 0 | number/100ml | Consumers’ taps |
2. | Escherichia coli (E. coli) | 0 | number/100ml | Consumers’ taps |
Item | Parameters | Concentration or Value (maximum) | Units of measurement | Point of Compliance |
---|---|---|---|---|
(**) Compliance required as to 95% of samples taken for coliform bacteria from each service reservoir (regulation 4(6)). | ||||
1. | Coliform bacteria | 0 | number/100ml | Service reservoirs(**) and water treatment works |
2. | Escherichia coli (E. coli) | 0 | number/100ml | Service reservoirs and water treatment works |
Item | Parameters | Concentration or Value (maximum) | Units of Measurement | Point of compliance |
---|---|---|---|---|
Notes: (i) The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. This is controlled by product specification. (ii) See also regulation 6(6). (iii) See also regulation 4(2)(d). (iv) See the definition of “pesticides and related products” in regulation 2. (v) The parametric value applies to each individual pesticide. (vi) “Pesticides: Total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring procedure. (vii) The specified compounds are:
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. (viii) The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. (ix) The specified compounds are:
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. | ||||
1. | Acrylamide | 0.10 | µg/l | (i) |
2. | Antimony | 5.0 | µgSb/l | Consumers’ taps |
3. | Arsenic | 10 | µgAs/l | Consumers’ taps |
4 | Benzene | 1.0 | µg/l | Consumers’ taps |
5 | Benzo(a)pyrene | 0.010 | µg/l | Consumers’ taps |
6 | Boron | 1.0 | mgB/l | Consumers’ taps |
7 | Bromate | 10 | µgBrO3/l | Consumers’ taps |
8 | Cadmium | 5.0 | µgCd/l | Consumers’ taps |
9 | Chromium | 50 | µgCr/l | Consumers’ taps |
10 | Copper (ii) | 2.0 | mgCu/l | Consumers’ taps |
11 | Cyanide | 50 | µgCN/l | Consumers’ taps |
12 | 1, 2 dichloroethane | 3.0 | µg/l | Consumers’ taps |
13 | Epichlorohydrin | 0.10 | µg/l | (i) |
14 | Fluoride | 1.5 | mgF/l | Consumers’ taps |
15 | Lead (ii) | (a) 25, from 25th December 2003 until immediately before 25th December 2013 | µgPb/l | Consumers’ taps |
(b) 10, on and after 25th December 2013 | µgPb/l | Consumers’ taps | ||
16 | Mercury | 1.0 | µgHg/l | Consumers’ taps |
17 | Nickel (ii) | 20 | µgNi/l | Consumers’ taps |
18 | Nitrate (iii) | 50 | mgNO3/l | Consumers’ taps |
19 | Nitrite (iii) | 0.50 | mgNO2/l | Consumers’ taps |
0.10 | Treatment works | |||
20 | Pesticides (iv) (v) Aldrin Dieldrin Heptachlor Heptachlor epoxide | 0.030 | µg/l | Consumers’ taps |
other pesticides | 0.10 | µg/l | Consumers’ taps | |
21 | Pesticides: Total (vi) | 0.50 | µg/l | Consumers’ taps |
22 | Polycyclic aromatic hydrocarbons (vii) | 0.10 | µg/l | Consumers’ taps |
23 | Selenium | 10 | µgSe/l | Consumers’ taps |
24 | Tetrachloroethene and Trichloroethene (viii) | 10 | µg/l | Consumers’ taps |
25 | Trihalomethanes: Total (ix) | 100 | µg/l | Consumers’ taps |
26 | Vinyl chloride | 0.50 | µg/l | (i) |
Item | Parameters | Concentration or Value (maximum unless otherwise stated) | Units of measurement | Point of compliance |
---|---|---|---|---|
1. | Aluminium | 200 | µgAl/l | Consumers’ taps |
2. | Colour | 20 | mg/l Pt/Co | Consumers’ taps |
3. | Hydrogen ion | 10.0 | pH value | Consumers’ taps |
6.5 (minimum) | pH value | |||
4. | Iron | 200 | µgFe/l | Consumers’ taps |
5. | Manganese | 50 | µgMn/l | Consumers’ taps |
6. | Odour | 3 at 25°C | Dilution number | Consumers’ taps |
7. | Sodium | 200 | mgNa/l | Consumers’ taps |
8. | Taste | 3 at 25°C | Dilution number | Consumers’ taps |
9. | Tetrachloromethane | 3 | µg/l | Consumers’ taps |
10. | Turbidity | 4 | NTU | Consumers’ taps |
Item | Parameters | Concentration or Value (maximum unless otherwise stated) | Units of measurement | Point of compliance |
---|---|---|---|---|
1. | Aluminium | 200 | µgAl/l | Consumers’ taps |
2. | Colour | 20 | mg/l Pt/Co | Consumers’ taps |
3. | Hydrogen ion | 10.0 | pH value | Consumers’ taps |
6.5 (minimum) | pH value | |||
4. | Iron | 200 | µgFe/l | Consumers’ taps |
5. | Manganese | 50 | µgMn/l | Consumers’ taps |
6. | Odour | 3 at 25°C | Dilution number | Consumers’ taps |
7. | Sodium | 200 | mgNa/l | Consumers’ taps |
8. | Taste | 3 at 25°C | Dilution number | Consumers’ taps |
9. | Tetrachloromethane | 3 | µg/l | Consumers’ taps |
10. | Turbidity | 4 | NTU | Consumers’ taps |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: