- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Chemicals (Hazard Information and Packaging for Supply) Regulations (Northern Ireland) 2009, Paragraph 16.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
16.—(1) The environmental hazards of a preparation shall be assessed by one or more of the following methods—
(a)by the conventional method described in paragraphs 18 and 19 using concentration limits; or
(b)by the criteria referred to in the approved classification and labelling guide in relation to the preparation for an appropriate classification and label.
(2) Where the environmental hazards have been established by both methods, the results of the method referred to in sub-paragraph (1)(b) shall be used for classifying the preparation.
(3) Subject to sub-paragraph (4), for preparations of a known composition, with the exception of plant protection products, classified in accordance with the method set out in sub-paragraph (1)(b), a new assessment of the environmental hazards shall be performed either by the method set out in sub-paragraph (1)(a) or (1)(b) whenever—
(a)changes of composition of the initial concentration, as a weight/weight or volume/volume percentage, of one or more of the dangerous constituents are introduced by the manufacturer which exceed the permitted variations set out in the following table—
Initial concentration range of the constituent | Permitted variation in actual concentration of the constituent | |
---|---|---|
≤ 2.5% | ± 30% | |
> 2.5 | ≤ 10% | ± 20% |
> 10 | ≤ 25% | ± 10% |
> 25 | ≤ 100% | ± 5% |
(b)changes of composition involving the substitution or addition of one or more constituents, which may or may not be dangerous within the definitions in Schedule 1, are introduced by the manufacturer.
(4) The revised assessment required by paragraph (3) shall not be required where there is a valid scientific justification for considering that a re-evaluation of the hazard will not result in a change of classification.
Commencement Information
I1Sch. 3 para. 16 in operation at 27.7.2009, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: