- Latest available (Revised)
- Point in Time (13/03/2009)
- Original (As made)
Version Superseded: 20/11/2012
Point in time view as at 13/03/2009. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 2009, Section 9.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
9.—(1) Subject to paragraph (5), a plastic material or article meets the required standard under this regulation if it is not capable of transferring its constituents to food with which it may come into contact in quantities exceeding the appropriate limit specified in paragraphs (2) to (4).
(2) Subject to paragraph (4), in the case of any plastic material or article comprising —
(a)an article which is a container or comparable to a container or can be filled, with a capacity of less than 500 millilitres or more than 10 litres; or
(b)sheet, film or any other material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of such material or article and the quantity of food in contact with it,
the appropriate limit is an overall migration limit of 10 milligrams per square decimetre of the surface area of the plastic material or article.
(3) In the case of any other plastic material or article, the appropriate limit is an overall migration limit of 60 milligrams of the constituents released per kilogramme of food or food simulant.
(4) For plastic materials or articles intended to be brought into contact or already in contact with food intended for infants and young children, the appropriate limit is always that specified in paragraph (3).
(5) For the purposes of this regulation a plastic material or article is not deemed to fail to meet the required standard under paragraph (1) if the only food with which that material or article may come into contact is food —
(a)which is specified in the table to Part 4 of Schedule 3; and
(b)where there is no “X” placed anywhere in the group of columns headed “Simulants to be used” opposite that food.
(6) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with this regulation, the defence available in paragraph 10(2) of Schedule 2 is available as specified in that paragraph.
Commencement Information
I1Reg. 9 in operation at 13.3.2009, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: