Print Options
PrintThe Whole
Rule
PrintThe Whole
Part
PrintThis
Section
only
Changes over time for: Section 17
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Status:
Point in time view as at 18/06/2019.
Changes to legislation:
There are currently no known outstanding effects for the The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (Northern Ireland) 2010, Section 17.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Reassessment of conformityN.I.
This section has no associated Explanatory Memorandum
17.—(1) This regulation applies to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2)[(c)] of that Directive.
(2) Equipment may be reassessed for conformity in accordance with this regulation.
(3) The equipment shall be—
(a)reassessed by a [type A] notified body in accordance with the procedure set out in [Annex III] to the Transportable Pressure Equipment Directive; and
[(b)inspected by a notified body notified for periodic inspection of that equipment and marked in accordance with the requirements of articles 14 and 15 of that Directive.]
[(4) But if a pressure receptacle has been manufactured in series to a design type for which a type A notified body notified for reassessment of conformity has issued a certificate of type reassessment, the reassessment of conformity may be undertaken by a notified body notified for periodic inspection of that pressure receptacle.]
[(5) In this regulation—
(a)“certificate of type reassessment” means a certificate issued in accordance with paragraph 7 of Annex III to the Transportable Pressure Equipment Directive; and
(b)“type A notified body” means a notified body conforming to standard EN ISO/IEC 17020 type A as revised or reissued from time to time.]
Textual Amendments
Commencement Information
Back to top