Print Options
PrintThe Whole
Rule
PrintThe Whole
Part
PrintThis
Section
only
Status:
This is the original version (as it was originally made).
Reassessment of conformity
This section has no associated Explanatory Memorandum
17.—(1) This regulation applies to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2)(b) of that Directive.
(2) Equipment may be reassessed for conformity in accordance with this regulation.
(3) The equipment shall be—
(a)reassessed by a notified body in accordance with the procedure set out in Part II of Annex IV to the Transportable Pressure Equipment Directive; and
(b)marked in accordance with the requirements of article 10 of that Directive that are applicable to the reassessment of conformity.
(4) But if the equipment has been manufactured in series to a design type which has been reassessed by a notified body in accordance with paragraph (3)(a), the procedure set out in Part II of Annex IV may be undertaken by an approved body and references in that Part to “notified body” are to be treated as references to “approved body”.
Back to top