- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Identification and Traceability of Explosives Regulations (Northern Ireland) 2013, SCHEDULE 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 4(1), (5) and (7)
1. For a cartridged explosive and any explosive in sacks—
(a)subject to paragraph 9(1), the unique identification must be on an adhesive label attached to, or be directly printed on, each cartridge or sack;
(b)an associated label must be placed on each case of cartridges; and
(c)in addition, a passive inert electronic tag may be attached to each cartridge or sack and an associated electronic tag attached to each case of cartridges.
Commencement Information
I1Sch. 2 para. 1 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I2Sch. 2 para. 1 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
2. Subject to paragraph 9(1), for a packaged two-component explosive, the unique identification must be on an adhesive label attached to, or be directly printed on, each smallest packaging unit containing the two components.
Commencement Information
I3Sch. 2 para. 2 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I4Sch. 2 para. 2 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
3. For plain detonators—
(a)subject to paragraph 9(1) and (2), the unique identification must be on an adhesive label attached to, or be directly printed or stamped on, the detonator shell;
(b)an associated label must be placed on each case of detonators; and
(c)in addition, a passive inert electronic tag may be attached to each detonator and an associated tag attached to each case of detonators.
Commencement Information
I5Sch. 2 para. 3 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I6Sch. 2 para. 3 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
4. For electric, non-electric and electronic detonators—
(a)subject to paragraph 9(1), the unique identification must—
(i)be on an adhesive label attached to the wires or tube; or
(ii)be on an adhesive label attached to, or be directly printed or stamped on, the detonator shell;
(b)an associated label must be placed on each case of detonators; and
(c)in addition, a passive inert electronic tag may be attached to each detonator and an associated tag attached to each case of detonators.
Commencement Information
I7Sch. 2 para. 4 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I8Sch. 2 para. 4 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
5. For primers and boosters—
(a)subject, in the case of boosters, to paragraph 9(1) and (2), the unique identification must be on an adhesive label attached to, or be directly printed on, the primer or booster;
(b)an associated label must be placed on each case of primers or boosters; and
(c)in addition, a passive inert electronic tag may be attached to each primer or booster and an associated tag attached to each case of primers or boosters.
Commencement Information
I9Sch. 2 para. 5 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I10Sch. 2 para. 5 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
6. For detonating cords—
(a)the unique identification must be on an adhesive label attached to, or be directly printed on, the bobbin;
(b)subject to paragraph 9(1) and (3), the unique identification must be marked every five meters on either the external envelope of the cord or the plastic extruded inner layer immediately under the exterior fibre of the cord;
(c)an associated label must be placed on each case of detonating cord; and
(d)in addition, a passive inert electronic tag may be inserted within the cord and an associated tag attached to each case of cord.
Commencement Information
I11Sch. 2 para. 6 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I12Sch. 2 para. 6 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
7. For cans, boxes and drums containing any explosive—
(a)subject to paragraph 9(1), the unique identification must be on an adhesive label attached to, or be directly printed on, the can, box or drum containing the explosive; and
(b)in addition, a passive inert electronic tag may be attached to each can, box and drum.
Commencement Information
I13Sch. 2 para. 7 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I14Sch. 2 para. 7 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
8. Where adhesive detachable copies of the labels referred to in paragraphs 1 to 7 are attached to the explosive article, container or each smallest packaging unit concerned for use by other persons, those copies must be clearly marked as copies of the original.
Commencement Information
I15Sch. 2 para. 8 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I16Sch. 2 para. 8 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
9.—(1) For articles smaller than those to which paragraph 2 of Schedule 1 applies, which are too small to affix the information under sub-paragraphs [F1(a)(ii)(aa), (ab), (bb) and (b)] of paragraph 1 of Schedule 1 or where it is technically impossible due to their shape or design to affix a unique identification—
(a)the unique identification specified in paragraph 1 of that Schedule must be affixed on each smallest packaging unit; and
(b)that packaging unit must be closed with a seal.
(2) In the case of each plain detonator or booster to which sub-paragraph (1) applies—
(a)the requirements of, respectively, paragraphs 3(a) and 5(a) do not apply;
(b)the information under sub-paragraph (a)(ii)(aa) [F2, (ab)] and (bb) of paragraph 1 of Schedule 1 must be marked, in a durable and clearly legible way, on, as the case may be, the plain detonator or booster; and
(c)the number of plain detonators or boosters contained in each smallest packaging unit must be printed on that unit.
(3) In the case of each detonating cord to which sub-paragraph (1) applies—
(a)the requirements of paragraph 6(b) do not apply; and
(b)the unique identification referred to in paragraph 1 of Schedule 1 must be marked on the reel or spool and on any smallest packaging unit.
(4) For the purposes of this paragraph, the smallest packaging unit means the smallest packaging unit on which it is possible to affix the unique identification specified in paragraph 1 of Schedule 1.
Textual Amendments
F1Words in Sch. 2 para. 9(1) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 19 para. 6(a)
F2Word in Sch. 2 para. 9(2)(b) inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 19 para. 6(b)
Commencement Information
I17Sch. 2 para. 9 in operation at 5.4.2013 for specified purposes, see reg. 1(1)
I18Sch. 2 para. 9 in operation at 5.4.2015 in so far as not already in operation, see reg. 1(2)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: